Successful operation of a continuous caster is based upon control of heat transfer in the mold. The mold slag is a key component in the success of continuous casting; however, the phenomena that occur in the gap between the shell and the mold are largely unknown as until recently there have been no techniques that allowed visualization and quantification of the solidification behavior of liquid slags. This has lead to slag design being an empirical science or art. Recently a new experimental technique, called Double Hot Thermocouple Technique (DHTT), was developed at Carnegie Mellon University that allowed the solidification behavior of a slag to be observed and quantified under conditions that simulate the thermal conditions that occur in steelmaking environments. This technique allows ladle, tundish and mold slags to be characterized under extreme conditions including those found between the mold wall and the growing shell of a continuous caster. Thus, a program is initiated, under this grant, to quantify and describe the phenomena that occur during the solidification of a slag in a steel mill environment. This will allow slag design to become an engineering science rather than an empirical exercise. The project deliverables were as follows: (1) The further …

The debate over the existence of a new particle postulated to explain the narrow positron spectra seen in heavy ion collisions has focused attention on a region of mass/lifetime where such a particle may exist and yet would not have been seen. To obtain the best possible sensitivity to elementary particles coupling to the electron in this unexplored region, we propose an electron beam dump experiment which will make parasitic use of the newly constructed wide band electron beam.

We correlate the positions of 13,240 Brightest Cluster Galaxies (BCGs) with 0.1 {le} z {le} 0.3 from the maxBCG catalog with radio sources from the FIRST survey to study the sizes and distributions of radio AGN in galaxy clusters. We find that 19.7% of our BCGs are radio-loud, and this fraction depends on the stellar mass of the BCG, and to a lesser extent on the richness of the parent cluster (in the sense of increasing radio loudness with increasing mass). The intrinsic size of the radio emission associated with the BCGs peaks at 55 kpc, with a tail extending to 200 kpc. The radio power of the extended sources places them on the divide between FR I and FR II type sources, while sources compact in the radio tend to be somewhat less radio-luminous. We also detect an excess of radio sources associated with the cluster, instead of with the BCG itself, extending out to {approx} 1.4 kpc.

None

None

The overall objective of the acceptance test is to demonstrate a combined system. This includes associated tools and equipment necessary to perform cleaning in the 105 K East Basin (KE) for achieving optimum reduction in the level of contamination/dose rate on canisters prior to removal from the KE Basin and subsequent packaging for disposal. Acceptance tests shall include necessary hardware to achieve acceptance of the cleaning phase of canisters. This acceptance test procedure will define the acceptance testing criteria of the high pressure water jet cleaning fixture. The focus of this procedure will be to provide guidelines and instructions to control, evaluate and document the acceptance testing for cleaning effectiveness and method(s) of removing the contaminated surface layer from the canister presently identified in KE Basin. Additionally, the desired result of the acceptance test will be to deliver to K Basins a thoroughly tested and proven system for underwater decontamination and dose reduction. This report discusses the acceptance test procedure for the High Pressure Water Jet.

Patent for an improved, simple, and effective car coupling that couples automatically and without anyone having to go between the cars. It consists of a drawhead with a slot on one side, upper and lower slides in the drawhead, a coupling pin that sits in the upper slide, a lever that is connected to the slide, a spring that holds the lower slide in place, and a bolt that connects the lever with the upper slide.

It is usual to determine the density of neutrons by using foils of metals which become radioactive as a result of bombardment in the region under investigation. From the rate of disintegration of the newly formed radioactive element the number of neutrons absorbed can be calculated. By use of the capture cross section of the element of which the foil is composed the density of the neutrons can then be computed. By counting the alpha particles from a bismuth foil of known weight after exposure to neutrons the density of the neutrons which produced this activity can be calculated. The least accurately known value which enters into this evaluation is the capture cross-section of bismuth for pile neutrons. This value may be improved by future measurements. It is of importance only for absolute measurements of neutron density so that relative values can be measured with considerable accuracy on the basis of known data.

This report describes the recent analysis of identified charged particle production at high rapidity performed on data collected from p+p collisions at RHIC ({radical}s = 200 GeV). The extracted invariant cross-sections compare well to NLO pQCD calculations. However, a puzzling high yield of protons at high rapidity and p{sub T} has been found.

We report the study of the nuclear modification factor R{sub AuAu} as function of p{sub T} and pseudo-rapidity in Au+Au collisions at top RHIC energy. We find this quantity almost independent of pseudo-rapidity. We use the {bar p}/{pi}{sup -} ratio as a probe of the parton density and the degree of thermalization of the medium formed by the collision. The {bar p}/{pi}{sup -} ratio has a clear rapidity dependence. The combination of these two measurements suggests that the pseudo-rapidity dependence of the R{sub AuAu} results from the competing effects of energy loss in a dense and opaque medium and the modifications of the wave function of the high energy beams in the initial state.

This report discusses a bill providing $212.2 billion in supplemental appropriations for FY2008 and FY2009. The measure includes $169.1 billion for military operations in Iraq, Afghanistan and elsewhere, $9.9 billion for international affairs programs, and $33.1 billion for domestic programs, of which $15.6 billion is for extended unemployment compensation.

This report discusses the gender wage gap and the historical presence of a gendered wage gap up until the time of the report's creation. It reports how the Federal government has fought the wage gap through acts like Equal Pay Act (EPA) and Fair Labor Standards Act (FLSA), and the current idea on how to correct and assist gender-based discrimination in the work force.

Seismic surveys successfully imaged a small scale C02injection (1,600 tons) conducted in a brine aquifer of the Frio Formationnear Houston, Texas. These time-lapse bore-hole seismic surveys,crosswell and vertical seismic profile (VSP), were acquired to monitorthe C02 distribution using two boreholes (the new injection well and apre-existing well used for monitoring) which are 30 m apart at a depth of1500 m. The crosswell survey provided a high-resolution image of the C02distribution between the wells via tomographic imaging of the P-wavevelocity decrease (up to 500 mls). The simultaneously acquired S-wavetomography showed little change in S-wave velocity, as expected for fluidsubstitution. A rock physics model was used to estimate C02 saturationsof 10-20 percent from the P-wave velocity change. The VSP survey resolveda large (-70 percent) change in reflection amplitude for the Friohorizon. This C02 induced reflection amplitude change allowed estimationof the C02 extent beyond the monitor well and on 3 azimuths. The VSPresult is compared with numerical modeling of C02 saturations and isseismically modeled using the velocity change estimated in the crosswellsurvey.

Patent for an improvement in car-couplings with illustrations.

Destructive and non-destructive examinations have been performed on specified components of shipping package 9975-03431. For those attributes that were also measured during the field surveillance, no significant changes were observed. All observations and test results met identified criteria, or were collected for information and trending purposes. Except for modest corrosion of the lead shield (which is typical of these packages following several years service), no evidence of a degraded condition was found in this package. The Savannah River Site (SRS) stores packages containing plutonium (Pu) materials in the KArea Complex (KAC). The Pu materials are packaged per the DOE 3013 Standard and stored within Model 9975 shipping packages in KAC. The KAC facility DSA (Document Safety Analysis) credits the Model 9975 package to perform several safety functions, including criticality prevention, impact resistance, containment, and fire resistance to ensure the plutonium materials remain in a safe configuration during normal and accident conditions. The Model 9975 package is expected to perform its safety function for at least 12 years from initial packaging. The DSA recognizes the degradation potential for the materials of package construction over time in the KAC storage environment and requires an assessment of materials performance to validate the assumptions …

None

In this paper we study the validity of coupling impedance bench measurements for distributed impedances, comparing the commonly used log formula to the result obtained applying a modified version of Bethe's theory of diffraction to a long slot in a coaxial beam pipe. The equations found provide a quantitative expression for the influence of the wire thickness used in the measurement of the real and imaginary part of the longitudinal impedance. The precision achievable in an actual measurement is therefore discussed. The method presented has also been applied in the presence of lumped impedances [1].

We present a study of the single-bunch beam break up (BBU) instability for a proposed x-ray facility, based on a recirculating linac, to be built in Berkeley. The effects of injection errors, both position and angle, and of misalignments in the linac are investigated. We propose possible methods for limiting the consequent emittance increase.

None

This report describes the phases of the Intelligence Planning, Programming, Budgeting and Evaluation Process (IPPBE). The Intelligence Community (IC) uses IPPBE to identify requirements and allocate resources that produce IC capabilities (e.g., human intelligence, signals intelligence, and geospatial intelligence) throughout development and execution of the National Intelligence Program (NIP) and budget. The NIP addresses priorities described in national security-related strategy documents such as the National Intelligence Strategy (NIS) and Consolidated Intelligence Guidance (CIG).

Thin resist films (< 1500 {angstrom}) based on DUV chemical approaches have been demonstrated for use in EUV lithography. Resists with good sensitivity (5--6 mJ/cm{sup 2}) were observed but imaging mechanisms, in particular as they affect sensitivity, are poorly understood. To clarify mechanisms leading to photosensitivity, acid-generation efficiency at both EUV and DUV wavelengths was measured for the most promising EUV resist compositions as well as initial radiation damage experiments. In previous work, polymer composition was found to be more important in determining the relative dose to print of resists to EUV and DUV radiation than was PAG composition. Here, acid generating efficiency for several polymers upon exposure to EUV and DW are compared to gain insight into the role of the polymer and PAG in converting the incident EUV photon energy into resist images. It is shown that acid generation efficiencies at EUV do not track efficiencies measured on identical films with DUV exposures, and is attributable to polymer and polymer/PAG interactions. No particular structural feature of the polymer could be correlated to the acid generation results. Radiation damage studies showed that polymers that create acid in different yields at EUV do not show differences in radiation damage, as …

None

Patent for improving hand truck, aiming to increase the carrying capacity of the truck.

Any detectable leakage emanating from the argon storage dewar is undesirable; not only from a safety standpoint (eg, cryogenic burns, asphyxiation, etc.), but also small amounts of air back diffusing through leaks can render the argon unsuitable for the future physics experiments to take place within the cryostats. Whereas leakage through some of the control and manually operated valves on the dewar does not necessarily infroduce any of the above hazards directly, it could be high enough to be an economical, and perhaps an operational nuisance. Contained in the following is a compilation of the final leakage rates associated with the dewar during the period of January through May of 1990 and the raw data from which they were derived from. Also contained is a calculation of the total maximum allowable leakage rate int%ut of the dewar. The general strategy employed while leak checking the dewar was to eliminate all leaks found which could be relatively easily stopped and to reduce the more difficult ones to an acceptable level. Leakage past the seats/plugs of control and main relief valves in addition to leakage past the ball seals in the diverter valve fell into the latter category. Helium mass spectrometer leak …