None

The aging tests conducted so far showed that duct tape tends to degrade in its performance as the joint it is applied to requires a geometrical description of a higher number of space dimensions (1-D, 2-D, 3-D). One-dimensional joints are the easiest to seal with duct tape, and thus the least to experience failure. Two-dimensional joints, such as the flexible duct core-to-collar joints tested in this study, are less likely to fail than three-dimensional collar-to-plenum joints, as the shrinkage could have a positive effect in tightening the joint. Three-dimensional joints are the toughest to seal and the most likely to experience failure. The 2-D flexible duct core-to-collar joints passed the six-month period of the aging test in terms of leakage, but with the exception of the foil-butyl tape, showed degradation in terms hardening, brittleness, partial peeling, shrinkage, wrinkling, delamination of the tape layers, flaking, cracking, bubbling, oozing and discoloration. The baking test results showed that the failure in the duct tape joints could be attributed to the type of combination of the duct tape and the material it is applied to, as the duct tape behaves differently with different substrates. Overall, the foil-butyl tape (Tape 4) had the best results, …

Current plans propose placing subsurface markers within protective barriers to deter potential human intrusion into disposed radioactive wastes. The subsurface markers would provide warning to the digging intruder should surface markers be removed, destroyed, or ignored. This plan sets forth procedures for testing the survivability of the subsurface markers during construction of the barrier. After the tests described herein are concluded, a decision can be made as to whether subsurface markers will require protection during barrier construction. If protection is required, additional tests will be needed to test the effectiveness of various protective approaches.

While the majority of ice core investigations have been undertaken in the polar regions, a few ice cores recovered from carefully selected high altitude/mid-to-low latitude glaciers have also provided valuable records of climate variability in these regions. A regional array of high resolution, multi-parameter ice core records developed from temperate and tropical regions of the globe can be used to document regional climate and environmental change in the latitudes which are home to the vase majority of the Earth's human population. In addition, these records can be directly compared with ice core records available from the polar regions and can therefore expand our understanding of inter-hemispheric dynamics of past climate changes. The main objectives of our paleoclimate research in the Tien Shan mountains of middle Asia combine the development of detailed paleoenvironmental records via the physical and chemical analysis of ice cores with the analysis of modern meteorological and hydrological data. The first step in this research was the collection of ice cores from the accumulation zone of the Inylchek Glacier and the collection of meteorological data from a variety of stations throughout the Tien Shan. The research effort described in this report was part of a collaborative effort with …

The primary objective of this project is to enhance domestic petroleum production by demonstration and technology transfer of an advanced oil recovery technology in the Paradox basin, southeastern Utah. If this project can demonstrate technical and economic feasibility, the technique can be applied to approximately 100 additional small fields in the Paradox basin alone, and result in increased recovery of 150 to 200 million barrels of oil. This project is designed to characterize five shallow-shelf carbonate reservoirs in the Pennsylvanian Paradox Formation and choose the best candidate for a pilot demonstration project for either a waterflood or carbon dioxide-flood project. The field demonstration, monitoring of field performance, and associated validation activities will take place in the Paradox basin within the Navajo Nation. The results of this project will be transferred to industry and other researchers through a petroleum extension service, creation of digital databases for distribution, technical workshops and seminars, field trips, technical presentations at national and regional professional meetings, and publication in newsletters and various technical or trade journals.

The University of Tennessee Space Institute (UTSI) reports on significant activity, task status, planned research, testing, development, and conclusions for the Magnetohydrodynamics (MHD) Coal-Fired Flow Facility (CFFF) and the Research and Development Laboratory. Although slowed by incessant rain during several days, work on the CFFF Bid Packages progressed to nearly 100 percent completion, excluding later punchlist items. On the quench system, the cyclone separator was delivered to UTSI, and under Downstream Components, the secondary combustor was received and the radiant slagging furnace was emplaced at the CFFF. Water quality analysis of Woods Reservoir provided the expected favorable results, quite similar to last year's. Generator experiments describing local current distribution are reported along with behavior under conditions of imposed leakage. Also, during the Quarter, the shelter for the cold flow modeling facility was constructed and circuits installation begun. A jet turbine combustor was tested for use as a vitiation burner. Samples taken from the exhaust duct, besides other applications, show that the refractories used are performing well in alleviating heat loss while exhibiting acceptable degredation. A new resistive power take-off network was designed and implemented.

None

None

None

This report evaluates the thermal hydraulic behavior of tank C-106 during and following the process test conducted from March 10, 1994 to June 15, 1994. During and following the process test the thermocouples on the thermocouple tree in riser No. 14 began to indicate significantly higher temperatures in the sludge than the low temperatures typically observed at this location. The thermocouples on the thermocouple tree in riser No. 8 during this same time period indicated temperature variations consistent with normal seasonal effects. This report summarizes the analyses conducted to understand the phenomena that caused the temperature history at riser No. 14.

The Waste Acceptance Product Specifications (WAPS)1 1.2 require that 'The Producer shall report the inventory of radionuclides (in Curies) that have half-lives longer than 10 years and that are, or will be, present in concentrations greater than 0.05 percent of the total inventory for each waste type indexed to the years 2015 and 3115'. As part of the strategy to meet WAPS 1.2, the Defense Waste Processing Facility (DWPF) will report for each waste type, all radionuclides (with half-lives greater than 10 years) that have concentrations greater than 0.01 percent of the total inventory from time of production through the 1100 year period from 2015 through 3115. The initial listing of radionuclides to be included is based on the design-basis glass as identified in the Waste Form Compliance Plan (WCP)2 and Waste Form Qualification Report (WQR)3. However, it is required that this list be expanded if other radionuclides with half-lives greater than 10 years are identified that may meet the greater than 0.01% criterion for Curie content. Specification 1.6 of the WAPS, International Atomic Energy Agency (IAEA) Safeguards Reporting for High Level Waste (HLW), requires that the ratio by weights of the following uranium and plutonium isotopes be reported: U-233, …

The purpose of this course is to provide a comprehensive introduction to the physics of beams with intense space charge. This course is suitable for graduate students and researchers interested in accelerator systems that require sufficient high intensity where mutual particle interactions in the beam can no longer be neglected. This course is intended to give the student a broad overview of the dynamics of beams with strong space charge. The emphasis is on theoretical and analytical methods of describing the acceleration and transport of beams. Some aspects of numerical and experimental methods will also be covered. Students will become familiar with standard methods employed to understand the transverse and longitudinal evolution of beams with strong space charge. The material covered will provide a foundation to design practical architectures. In this course, we will introduce you to the physics of intense charged particle beams, focusing on the role of space charge. The topics include: particle equations of motion, the paraxial ray equation, and the Vlasov equation; 4-D and 2-D equilibrium distribution functions (such as the Kapchinskij-Vladimirskij, thermal equilibrium, and Neuffer distributions), reduced moment and envelope equation formulations of beam evolution; transport limits and focusing methods; the concept of emittance and …

During the B0 Overpass construction for the CDF detector at Fermilab, 33 B1 magnets were measured using a bucked tangential coil. Measurements were made on the midplane, at the centerline and at {+-} 1 inch horizontal displacement. Since the coil was only 62 inches long, measurements were made at four longitudinal positions. Because of the design of the Main Ring, it was sufficient to combine data from all positions and report the harmonic spectrum for the magnet as a whole. For modeling the Scrounge-atron, it is more useful to treat each measurement position separately. The author reports here an analysis of the harmonic spectra at each probe position, based on the original data.

The U.S. Atomic Energy Commission's Plowshare Program focused on developing the capability to use nuclear detonations for civil works projects and industrial applications. The participants envisioned canals and harbors constructed quickly and cheaply and the augmentation of natural gas, oil, and geothermal power production. The Plowshare Program began in the 1950s and ended in the 1970s. The archaeological effort to relocate and record places associated with this project has identified a unique and varied historical legacy on the landscape in the western United States and discovered that the range and types of projects considered and planned are more diverse than formerly recognized.

The presence of microbunching instabilities due to the compression of high-brightness electron beams at existing and future x-ray free-electron lasers (FELs) results in restrictions on the attainable lasing performance and renders beam imaging with optical transition radiation impossible. The instability can be suppressed by introducing additional energy spread, i.e., heating the electron beam, as demonstrated by the successful operation of the laser heater system at the Linac Coherent Light Source. The increased energy spread is typically tolerable for self-amplified spontaneous emission FELs but limits the effectiveness of advanced FEL schemes such as seeding. In this paper, we present a reversible electron beam heating system based on two transverse deflecting radio-frequency structures (TDSs) upstream and downstream of a magnetic bunch compressor chicane. The additional energy spread is introduced in the first TDS, which suppresses the microbunching instability, and then is eliminated in the second TDS. We show the feasibility of the microbunching gain suppression based on calculations and simulations including the effects of coherent synchrotron radiation. Acceptable electron beam and radio-frequency jitter are identified, and inherent options for diagnostics and on-line monitoring of the electron beam's longitudinal phase space are discussed.

As part of the over-all program of investigation of the rheological properties of aqueous thorium oxide slurries, a capillary-tube viscometer was designed for routine determiation of shear diagrams of slurries over a temperature range of 30 to 85 deg C. A particular feature of this viscometer is the vertical oricntation of the capillary tube which minimizes the effect on the results obtained with dilate, rapidly settling slurries. (auth)

The SciDAC Visualization and Analytics Center for Enabling Technologies (VACET) isa highly productive effort combining the forces of leading visualization researchersfrom five different institutions to solve some of the most challenging dataunderstanding problems in modern science. The VACET technology portfolio isdiverse, spanning all typical visual data analysis use models and effectivelybalancing forward-looking research with focused software architecture andengineering resulting in a production-quality software infrastructure. One of the keyelements in VACET's success is a rich set of projects that are collaborations withscience stakeholders: these efforts focus on identifying and overcoming obstacles toscientific knowledge discovery in modern, large, and complex scientific datasets.

None

The long term goals of this research were to define the substrate oxidation pathways, the electron transport mechanisms, and the modes of energy conservation employed during the dissimilatory oxidation of sulfur practiced by various species of the thiobacilli. Specific adhesion of the thiobacilli to elemental sulfur was studied by electrical impedance, dynamic light scattering, laser Doppler velocimetry, and optical trapping methods. The conclusion is that the thiobacilli appear to express specific receptors that enable the bacteria to recognize and adhere to insoluble sulfur. The enzyme tetrathionate oxidase was purified from two species of the thiobacilli. Extensive structural and functional studies were conducted on adenosine 5'-phosphosulfate reductase purified from cell-free extracts of Thiobacillus denitrificans. The kinetic mechanism of rhodanese was studied.

This paper discusses the use of radiography as a tool for evaluating damage to radioactive material packaging subjected to regulatory accident conditions. The Code of Federal Regulations, 10 CFR 71, presents the performance based requirements that must be used in the development (design, fabrication and testing) of a radioactive material packaging. The use of various non-destructive examination techniques in the fabrication of packages is common. One such technique is the use of conventional radiography in the examination of welds. Radiography is conventional in the sense that images are caught one at a time on film stock. Most recently, digital radiography has been used to characterize internal damage to a package subjected to the 30-foot hypothetical accident conditions (HAC) drop. Digital radiography allows for real time evaluation of the item being inspected. This paper presents a summary discussion of the digital radiographic technique and an example of radiographic results of a 9975 package following the HAC 30-foot drop.

During this report period, a decision was made to defer the construction of the 50 MT Si/year Experimental Process System Development Unit (EPSDU) until FY 1980, and in the meantime to construct and evaluate, at full scale, four critical units of the EPSDU. The fluidized bed, zinc vaporizer, by-product condenser, and electrolytic cell have been combined with auxiliary units, capable of supporting 8-hour batchwise operation, to form the Process Development Unit (PDU), which is scheduled to be in operation by October 1, 1979. The design of the PDU and objectives of its operation are discussed. Pending completion of the PDU, work has continued in the area of experimental support. A wetted-wall condenser has been constructed in which zinc chloride, introduced in excess of that condensed, is used to wash down the unreacted zinc and residual silicon accumulated as fine-particle solids. Improvements in the experimental electrolytic cell have led to power efficiencies around 40%, thus substantiating the pertinence of the Bureau of Mines experience with pure zinc chloride as a basis for what can be expected with the zinc chloride/zinc/silicon slurry of the present application. (WHK)

None

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for development as a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. To facilitate public review and comment, in May 2001 the DOE released the Yucca Mountain Science and Engineering Report (S&ER) (DOE 2001 [DIRS 153849]), which presents technical information supporting the consideration of the possible site recommendation. The report summarizes the results of more than 20 years of scientific and engineering studies. A decision to recommend the site has not been made: the DOE has provided the S&ER and its supporting documents as an aid to the public in formulating comments on the possible recommendation. When the S&ER (DOE 2001 [DIRS 153849]) was released, the DOE acknowledged that technical and scientific analyses of the site were ongoing. Therefore, the DOE noted in the Federal Register Notice accompanying the report (66 FR 23013 [DIRS 155009], p. 2) that additional technical information would be released before the dates, locations, and times for public hearings on the possible recommendation were announced. This information includes: (1) the results of additional technical studies of a potential repository at Yucca Mountain, contained …

We describe a repository of data for the testing of numerical algorithms and mathematical software for matrix computations. The repository is designed to accommodate both dense and sparse matrices, as well as software to generate matrices. It has been seeded with the well known Harwell-Boeing sparse matrix collection. The raw data files have been augmented with an integrated World Wide Web interface which describes the matrices in the collection quantitatively and visually, For example, each matrix has a Web page which details its attributes, graphically depicts its sparsity pattern, and provides access to the matrix itself in several formats. In addition, a search mechanism is included which allows retrieval of matrices based on a variety of attributes, such as type and size, as well as through free-text search in abstracts. The URL is http://math.nist.gov/MatrixMarket.