This acceptance test verifies the MICON program changes for the new automatic transfer switch ATS-2 alarms, the Closed Loop Cooling isolator status, the CB-3 position alarm, and the alarms for the new emergency fan damper backup air compressor.

There are three basic ways to protect the public from the hazards of exposure to radionuclides in nuclear waste: completely contain the waste; limit the rate at which radionuclides are released; and, once radionuclides are released, minimize their impact by reducing concentrations and retarding transport. A geologic repository system that implements all three provides maximum protection for the public: if one element fails, the others serve to protect. This is ''defense-in-depth.'' Demonstrating confidence in the ability of a designed system to provide the requisite safety to the public must rely on a combination of the following aspects relating to engineered and natural system components: 1 Knowledge or understanding of properties and processes 2 Uniformity of (or ability to understand or control) the range of variability associated with each component 3 Experience over time This paper proposes a tool based on defining a ''confidence region'' determined by these three essential aspects of confidence. The defense-in-depth decision-making tool described identifies the portion of the ultimate confidence region that is not well demonstrated and indicates where there is potential for changing a specific component's confidence region, therefore providing in-formation for decisions on emphasis--either for demonstrating performance or for focusing on further studies. The …

A letter report issued by the General Accounting Office with an abstract that begins "GAO reviewed the Department of Defense's (DOD) efforts to incorporate common subsystems and components in its ballistic missile defense acquisition programs, focusing on: (1) the key benefits that the Ballistic Missile Defense Organization (BMDO) and service officials believe could be achieved through commonality; (2) what BMDO and the services have done to incorporate commonality into their programs; and (3) BMDO's plans for instilling commonality in the future."

Successful techniques have been developed for simulating some experimental shipboard fires. The experimental fues were staged in Holds 4 and 5 of the Mayo Lykes, a test ship operated by the United States Coast Guard Fire and Safiety Test Detachment at Little Sand Island in Mobile Bay, Alabama. The tests simulated an engine-room or galley fire in the compartment adjacent to simulated hazardous cargo. The purpose of these tests was to determine the effect the fires in Hold 4 had on the cargo in Holds 4 and 5. The simulation is done with CFX, a commercial computational fluid dynamics code. Analyses show that simulations can accurately estimate a maritime fire environment for radioactive materials packaging. Radiative heat transfer dominates the hold-fue environment near the hot bulkhead. Flame temperatures between 800 and 1000°C give heat fluxes and temperatures typical of the measured fire environment for the simulated radioactive materials package. The simulation predicted the occurrence of flow patterns near the calorimeter (simulated radioactive materials package) similar to those observed during the experiment. The simulation was also accurate in predicting a heated fluid layer near the ceiling that increases in thickness as time passes.

Barwood Cab Fleet Study Summary is the second in a new series called ''Alternative Fuel Information Case Studies,'' designed to present real-world experiences with alternative fuels to fleet managers and other industry stakeholders.

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a legislative requirement, GAO reviewed the creation of 10 National Guard Rapid Assessment and Initial Detection (RAID) teams, focusing on: (1) obtaining the views of federal, state, and local officials regarding the role of RAID teams in response plans; (2) determining whether there are other federal, state, or local government entities that can perform similar functions to the RAID teams; and (3) evaluating the RAID teams' roles and responsibilities and how the teams plan to meet these responsibilities."

This criticality evaluation is for Spent N Reactor fuel unloaded from the existing canisters in both KE and KW Basins, and loaded into multiple canister overpack (MCO) containers with specially built baskets containing a maximum of either 54 Mark 1V or 48 Mark IA fuel assemblies. The criticality evaluations include loading baskets into the cask-MCO, operations at the Cold Vacuum Drying Facility, and storage in the Canister Storage Building. Many conservatisms have been built into this analysis, the primary one being the selection of the k{sub eff} = 0.95 criticality safety limit. Additional analyses in this revision include partial fuel basket loadings, loading 26.1 inch Mark IA fuel assemblies into Mark IV fuel baskets, and the revised fuel and scrap basket designs. The MCO MCNP model was revised to include the shield plug assembly.

Monolithic structural ceramics and continuous fiber ceramic matrix composites (CMCs) are being developed for application in many thermally and chemically aggressive environments where structural reliability is paramount. We have recently developed advanced nondestructive evaluation (NDE) methods that can detect distributed ''defects'' such as density gradients and machining-induced damage in monolithic materials, as well as delamination, porosity, and throughwall cracks, in CMC materials. These advanced NDE methods utilize (a) high-resolution, high-sensitivity thermal imaging; (b) high-resolution X-ray imaging; (c) laser-based elastic optical scattering; (d) acoustic resonance; (e) air-coupled ultrasonic methods; and (f) high-sensitivity fluorescent penetrant technology. This paper discusses the development and application of these NDE methods relative to ceramic processing and ceramic components used in large-scale industrial gas turbines and hot gas filters for gas stream particulate cleanup.

Austenitic stainless steels are used extensively as structural alloys in reactor pressure vessel internal components because of their superior fracture toughness properties. However, exposure to high levels of neutron irradiation for extended periods leads to significant reduction in the fracture resistance of these steels. This paper presents results of fracture toughness J-R curve tests on four heats of Type 304 stainless steel that were irradiated to fluence levels of {approx}0.3 and 0.9 x 10{sup 21} n cm{sup {minus}2} (E >1 MeV) at {approx}288 C in a helium environment in the Halden heavy water boiling reactor. The tests were performed on 1/4-T compact tension specimens in air at 288 C; crack extensions were determined by both DC potential and elastic unloading compliance techniques.

The purpose of this standard is to provide Project Hanford Management Contractors (PHMC) with guidance for ensuring radiological considerations are adequately addressed throughout the work planning process. Incorporating radiological controls in the planning process is a requirement of the Hanford Site Radiological Control Manual (HSRCM-I), Chapter 3, Part 1. This standard is applicable to all PHMC contractors and subcontractors. The essential elements of this standard will be incorporated into the appropriate site level work control standard upon implementation of the anticipated revision of the PHMC Administration and Procedure System.

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO reviewed the progress that the Federal Agricultural Mortgage Corporation (Farmer Mac) has made in achieving its statutory mission and examined its future viability, focusing on: (1) actions taken by Farmer Mac to promote the development of a secondary market, including the introduction of new programs and products; the standardization of loan processes, including loan documents and underwriting standards; and the use of risk management techniques to facilitate safe and sound secondary market activities; and (2) Farmer Mac's future viability and the potential benefits and costs of a government-sponsored secondary market for agricultural mortgages."

The goal of this research is the understanding of elementary chemical and physical processes important in the combustion of fossil fuels. Interest centers on reactions involving short-lived chemical intermediates and their properties. High-resolution high-sensitivity laser absorption methods are augmented by high temperature flow-tube reaction kinetics studies with mass spectrometric sampling. These experiments provide information on the energy levels, structures and reactivity of molecular flee radical species and, in turn, provide new tools for the study of energy flow and chemical bond cleavage in the radicals in chemical systems. The experimental work is supported by theoretical and computational work using time-dependent quantum wavepacket calculations that provide insights into energy flow between the vibrational modes of the molecule.

The goal of this research is the understanding of elementary chemical and physical processes important in the combustion of fossil fuels. Interest centers on reactions and properties of short-lived chemical intermediates. High-resolution, high-sensitivity, laser absorption methods are augmented by high- temperature, flow-tube reaction kinetics studies with mass-spectrometic sampling. These experiments provide information on the energy levels, structures and reactivity of molecular free radical species and in turn, provide new tools for the study of energy flow and chemical bond cleavage in the radicals involved in chemical systems. The experimental work is supported by theoretical studies using time-dependent quantum wavepacket calculations, which provide insight into energy flow among the vibrational modes of polyatomic molecules and interference effects in multiple-surface dynamics.

The HANSF analysis tool is an integrated model considering phenomena inside a multi-canister overpack (MCO) spent nuclear fuel container such as fuel oxidation, convective and radiative heat transfer, and the potential for fission product release. It may be used for all phases of spent fuel disposition including cold vacuum drying, transportation, and storage. This manual reflects HANSF version 1.3, a revised version of version 1.2a. HANSF 1.3 was written to add new models for axial nodalization, add new features for ease of usage, and correct errors. HANSF 1.3 is intended for use on personal computers such as IBM-compatible machines with Intel processors running under a DOS-type operating system. HANSF 1.3 is known to compile under Lahey TI and Digital Visual FORTRAN, Version 6.0, but this does not preclude operation in other environments.

The purpose of this report is to assess the adequacy of current cylinder test results to serve as a baseline for comparison with cylinder tests conducted on stockpile return material.

This report provides new liquidus temperature (T_L) versus composition data that can be used to reduce uncertainty in T_L calculation for DWPF glass. According to the test plan and test matrix design PNNL has measured T_L for 53 glasses within and just outside of the current DWPF processing composition window. The T_L database generated under this task will directly support developing and enhancing the current T_L process-control model. Preliminary calculations have shown a high probability of increasing HLW loading in glass produced at the SRS and Hanford. This increase in waste loading will decrease the lifecycle tank cleanup costs by decreasing process time and the volume of waste glass produced.

The authors use optical pump, coherent terahertz probe spectroscopy to transiently excite nonequilibrium populations of quasiparticles in YBa{sub 2}Cu{sub 3}O{sub 7.{delta}} and monitor, with picosecond resolution, the superfluid and quasiparticle dynamics.

We have observed 1 event consistent with the signature expected of the rare decay of a positive kaon to a positive pion and a neutrino anti-neutrino pair. In the examined momentum region of 211 to 230 MeV/c in the center of mass of the kaon we estimated the backgrounds to be about 0.08 &plusmn; 0.03 events. From this observation we estimate the branching ratio to be 4.2<SUP>+9.7</SUP><SUB>-3.5</SUB> x 10<SUP>-10</SUP>. In this presentation I will explain the experiment, and the analysis techniques. I will also discuss the expected improvements in the near future from the analysis of new data sets.

In 1996, the State of Ohio established a project to demonstrate the effectiveness of ethanol as an alternative to gasoline in its fleet operations. All vehicles in the study were 1996 model year Ford Tauruses: ten were flexible-fuel vehicles (FFVs) and three were standard gasoline models. Overall, the State of Ohio's staff has been pleased with the Taurus FFVs. The vehicles perform well and meet the operators' needs.

We have constructed a humidity-controlled chamber in which deflections of polysilicon cantilever beams are observed by interferometry, resulting in in-situ adhesion measurements within a fracture mechanics framework. From adhesion energy measurements for uncoated hydrophilic beams, we demonstrate an exponential dependence of adhesion on relative humidity (RH). We can explain this trend with a single-asperity model for capillary condensation. For coated hydrophobic beams, adhesion is independent of RH up to a threshold value which depends on the coating used. However, we have found that exposure to very high RH ({ge}90%) ambients can cause a dramatic increase in adhesion, surprisingly with a stronger effect for perfluorodecyltrichlorosilane (FDTS, C{sub 10}H{sub 4}F{sub 17}SiCl{sub 3}) than octadecyltrichlorosilane (ODTS, C{sub 18}H{sub 37}SiCl{sub 3}). Newly developed computational mechanics to measure adhesion in the presence of an applied load allow us to explore how the adhesion increase develops. We believe that water adsorption at silanol sites at the FDTS/substrate interface, possibly exacerbated by coupling agent migration, leads to water islanding and the subsequent adhesion increase at very high RH levels.

Some applications of an Electron Beam Ion Source (EBIS) require intensities of highly charged ions significantly greater than those which have been achieved in present EBIS sources. For example, the ion source for the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory (BNL) must be capable of generating 3 x 10{sup 9} ions of Au{sup 35+} or 2 x 10{sup 9} ions of U{sup 45+} per pulse. In this case, if the fraction of ions of interest is 20% of the total ion space charge, the total extracted charge is {approximately} 5 x 10{sup 11}. It is also desirable to extract these ions in a 10 {micro}s pulse to allow single turn injection into the first synchrotrons. Requirements for an EBIS which could meet the needs of the LHC at CERN are similar ({approximately} 1.5 x 10{sup 9} ions of Pb{sup 54+} in 5.5 {micro}s). This charge yield is about an order of magnitude greater than that achieved in existing EBIS sources, and is what is meant here by high current. This also implies, then, an EBIS with a high electron beam current.

The panels will be used to fabricate B and C layer MDT octant supports. The octant support arrangements can be seen on the accompanying figures, Fig 1 and Fig 2. Currently we are considering buying 60 inch wide rectangular panels and cutting and splicing them-to-the octant shape. Proposals for octant panels cut to size and panels of different width will be considered.

The Urban Consortium (UC), created by PTI, is a network of jurisdictions with populations of over 250,000. The UC provides a platform for research and enterprise through its Energy, Environmental, Transportation, and Telecommunications and Information Task Forces. The UC provides a unique creative forum where elected and appointed officials and technical managers identify, test, and validate practical ways to improve the provision of public services and, where possible, generate new revenue opportunities. Public Technology, Inc., is the non-profit technology organization of the National League of Cities, the National Association of Counties, and the International City/County Management Association. PTI creates and advances technology-based products, services, and enterprises in cities and counties nationwide. Staffed by PTI, the UC addresses the critical needs of local governments through its Task Forces. The Urban Consortium Energy Task Force (UCETF) program has, since its inception, acted as a laboratory to develop, test solutions and share the resulting products or management approaches with the wider audience of local governments. It has addressed the overlap between energy and environment and economic development policy issues, and, is the nation's most extensive cooperative local government program to improve energy management and decision-making through applied research and technology cooperation. Proposals to …

Tank 241-C-104 has been identified as one of the first tanks to be retrieved for high-level waste pretreatment and immobilization. Retrieval of the tank waste will require dilution. Laboratory tests are needed to determine the amount of dilution required for safe retrieval and transfer of feed. The proposed laboratory tests are described in this document.