This is the 45-Day report for the fiscal year 1995 tank 241-U-204 (U-204) push-mode characterization effort. Included are a summary of analytical results and copies of the differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) scans. Core samples 81 and 82 from tank U-204, obtained by the push-mode core sampling method, were received by the 222-S Laboratories. Each core consisted of only one segment. Both core samples and the field blank were extruded, subsampled, and analyzed in accordance with Reference 1. Drainable liquids and the field blank were analyzed at the segment level for energetics by DSC, percent water by TGA, and total organic carbon (TOC) by furnace oxidation. In addition, the presence or absence of any separable, presumably organic, layer in drainable liquid samples was noted and none was observed. The solids were analyzed directly at the half segment level for energetics by DSC, percent water by TGA, and TOC by persulfate oxidation. Total alpha activity was determined on fusion digestions of the sludge subsamples. No immediate notifications were necessary on samples from cores 81 or 82.

Physics information for the D and F piles is presented. Thermal conductivity, reactivity, and irradiation levels are included. Concerning the cooling systems: process water control, pressure drip studies, purging studies, corrosion, and gun barrel clearance of expanded graphite are discussed. (GHH)

This report provides a revised safety analysis for the upgraded 242-A Evaporator (the Evaporator). This safety analysis report (SAR) supports the operation of the Evaporator following life extension upgrades and other facility and operations upgrades (e.g., Project B-534) that were undertaken to enhance the capabilities of the Evaporator. The Evaporator has been classified as a moderate-hazard facility (Johnson 1990). The information contained in this SAR is based on information provided by 242-A Evaporator Operations, Westinghouse Hanford Company, site maintenance and operations contractor from June 1987 to October 1996, and the existing operating contractor, Waste Management Hanford (WMH) policies. Where appropriate, a discussion address the US Department of Energy (DOE) Orders applicable to a topic is provided. Operation of the facility will be compared to the operating contractor procedures using appropriate audits and appraisals. The following subsections provide introductory and background information, including a general description of the Evaporator facility and process, a description of the scope of this SAR revision,a nd a description of the basic changes made to the original SAR.

The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOERL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion includes closure plan documentation submitted for individual, treatment, storage, and/or disposal units undergoing closure, such as the 300 Area Waste Acid Treatment System. Documentation contained in the General Information Portion is broader in nature and could be used by multiple treatment, storage, and/or disposal units (e.g., the glossary provided in the General Information Portion). Whenever appropriate, 300 Area Waste Acid Treatment System documentation makes cross-reference to the General Information Portion, rather than duplicating text. This 300 Area Waste Acid Treatment System Closure Plan (Revision 2) includes a Hanford Facility Dangerous Waste Permit Application, Part A, Form 3. Information provided in this closure plan is current as of April 1999.

An rf system is described for the 500-MHz cylindrical resonator that is coupled to the Astron beam to modulate its energy by +- 1.5 percent.

The magnetic field design for a 600 MeV proton cyclotron is described. The cyclotron has a single stage, a normal conducting magnet coil and a 9.8 m outside yoke diameter. It has 8 sectors, with a transition to 4 sectors in the center region. The magnetic field design was done using 1958 Harwell rectangular ridge system measurements and was compared with recent 3-dimensional field calculations with the program TOSCA at NSCL. The center region 4--8 sector transition focussing was also checked with TOSCA.

This project focused on the variability of clouds that is present across a wide range of scales ranging from the synoptic to the millimeter. In particular, there is substantial variability in cloud properties at scales smaller than the grid spacing of models used to make climate projections (GCMs) and weather forecasts. These models represent clouds and other small-scale processes with parameterizations that describe how those processes respond to and feed back on the largescale state of the atmosphere.

Sodium tetraphenylborate is used to coprecipitate cesium with potassium in the precipitation process that has been developed to decontaminate waste salt solutions. This report summarizes the results that have been obtained.

This report summarizes the work done during the sixth quarter of the project. Effort was directed in three areas: (1) Further development of the model on the role of connectivity on ionic conductivity of porous bodies, including the role of grain boundaries and space charge region. (2) Calculation of the effect of space charge and morphology of porous bodies on the effective charge transfer resistance of porous composite cathodes. (3) The investigation of the three electrode system for the measurement of cathodic polarization using amperometric sensors.

The Biolog OmniLog? Phenotype MicroArray (PM) plate technology was successfully adapted to generate a select phenotypic profile of the strict anaerobe Geobacter metallireducens (G.m.). The profile generated for G.m. provides insight into the chemical sensitivity of the organism as well as some of its metabolic capabilities when grown with a basal medium containing acetate and Fe(III). The PM technology was developed for aerobic organisms. The reduction of a tetrazolium dye by the test organism represents metabolic activity on the array which is detected and measured by the OmniLog(R) system. We have previously adapted the technology for the anaerobic sulfate reducing bacterium Desulfovibrio vulgaris. In this work, we have taken the technology a step further by adapting it for the iron reducing obligate anaerobe Geobacter metallireducens. In an osmotic stress microarray it was determined that the organism has higher sensitivity to impermeable solutes 3-6percent KCl and 2-5percent NaNO3 that result in osmotic stress by osmosis to the cell than to permeable non-ionic solutes represented by 5-20percent ethylene glycol and 2-3percent urea. The osmotic stress microarray also includes an array of osmoprotectants and precursor molecules that were screened to identify substrates that would provide osmotic protection to NaCl stress. None of the …

None

The global atmospheric concentration of CO2 has increased by more than 30percent since the industrial revolution. Although the stimulating effects of elevated CO2 (eCO2) on plant growth and primary productivity have been well studied, its influences on belowground microbial communities are poorly understood and controversial. In this study, we showed a significant change in the structure and functional potential of soil microbial communities at eCO2 in a grassland ecosystem, the BioCON (Biodiversity, CO2 and Nitrogen) experimental site (http://www.biocon.umn.edu/) using a comprehensive functional gene array, GeoChip 3.0, which contains about 28,0000 probes and covers approximately 57,000 gene variants from 292 functional gene families involved in carbon, nitrogen, phosphorus and sulfur cycles as well as other functional processes. GeoChip data indicated that the functional structure of microbial communities was markedly different between ambient CO2 (aCO2) and eCO2 by detrended correspondence analysis (DCA) of all 5001 detected functional gene probes although no significant differences were detected in the overall microbial diversity. A further analysis of 1503 detected functional genes involved in C, N, P, and S cycles showed that a considerable portion (39percent) of them were only detected under either aCO2 (14percent) or eCO2 (25percent), indicating that the functional characteristics of the microbial …

Conditions of time, temperature, and pressure for hotpress bonding of aluminum-nickel and uranium-nickel disks were determined experimentally. A process for jacketing Hanford four-inch slugs, coated with nonporous nickel electroplates, in aluminum cans by cold-sizing and hot-pressing was developed and conditions of time, temperature, and pressure required for the actual canning process were determined. (auth)

A numerical simulation of coupled multiphase fluid flow, heat transfer, and mechanical deformation was carried out to study coupled thermal-hydrological-mechanical (THM) processes at the Yucca Mountain Drift Scale Test (DST) and for validation of a coupled THM numerical simulator. The ability of the numerical simulator to model relevant coupled THM processes at the DST was evaluated by comparison of numerical results to in situ measurements of temperature, water saturation, displacement, and fracture permeability. Of particular relevance for coupled THM processes are thermally induced rock-mass stress and deformations, with associated changes in fracture aperture and fractured rock permeability. Thermally induced rock-mass deformation and accompanying changes in fracture permeability were reasonably well predicted using a continuum elastic model, although some individual measurements of displacement and permeability indicate inelastic mechanical responses. It is concluded that fracture closure/opening caused by a change in thermally induced normal stress across fractures is an important mechanism for changes in intrinsic fracture permeability at the DST, whereas fracture shear dilation appears to be less significant. Observed and predicted maximum permeability changes at the DST are within one order of magnitude. These data are important for bounding model predictions of potential changes in rock-mass permeability at a future repository …

TA 2-1083, under which RFSA processing is conducted, calls for a nominal mercuric ion concentration in the dissolver solution of 0.006M with a maximum of 0.01 M. The second RFSA campaign operated according to these guidelines with the initial Hg(II) concentration being 0.0068 M. Part of this study is to ascertain optimum excess Hg(I) for chloride removal.

While Magnetic X-ray Circular Dichroism (MXCD) has been applied extensively to the extraction of elemental magnetic moments in various magnetic multilayers, the configuration of actual devices imposes certain constraints on the application of MXCD to devices. Using a set of real, thin-film spin valve devices with varying Cu spacer layer thicknesses, we demonstrate the correlation between MXCD and R-H measurements on those devices as well as the restrictions on the interpretation of MXCD data imposed by both the device topology and the formulation of realistic error estimates.

Accurately modeling and predicting performance for large-scale applications becomes increasingly difficult as system complexity scales dramatically. Analytic predictive models are useful, but are difficult to construct, usually limited in scope, and often fail to capture subtle interactions between architecture and software. In contrast, we employ multilayer neural networks trained on input data from executions on the target platform. This approach is useful for predicting many aspects of performance, and it captures full system complexity. Our models are developed automatically from the training input set, avoiding the difficult and potentially error-prone process required to develop analytic models. This study focuses on the high-performance, parallel application SMG2000, a much studied code whose variations in execution times are still not well understood. Our model predicts performance on two large-scale parallel platforms within 5%-7% error across a large, multi-dimensional parameter space.

Following the May 14, 1997 chemical explosion at Hanford's Plutonium Reclamation Facility, the Department of Energy Richland Operations Office and its prime contractor, Fluor Hanford, Inc., completed an extensive assessment to identify and address chemical and radiological safety vulnerabilities at all facilities under the Project Hanford Management Contract. This was a challenging undertaking because of the immense size of the problem, unique technical issues, and competing priorities. This paper focuses on the assessment process, including the criteria and methodology for data collection, evaluation, and risk-based scoring. It does not provide details on the facility-specific results and corrective actions, but discusses the approach taken to address the identified vulnerabilities.

Objective of this audit was to determine whether the Mound Plant`s Fiscal Year 1992 reduction in force (RIF) was effectively managed and implemented properly by DOE. DOE established policy to encourage contractors to reduce staffing by voluntary separations without unreasonable separation costs. EG&G Mound`s FY 1992 RIF was accomplished by voluntary separations; however, its implementation unreasonably increased costs because DOE did not have adequate criteria or guidelines for evaluating contractors` RIF proposals, and because EG&G Mound furnished inaccurate cost data to DOE evaluators. The unreasonable costs amounted to at least $21 million. Recommendations are made that DOE develop and implement guidelines to impose limitations on voluntary separation allowances, early retirement incentive payments, and inclusion of crucial employee classifications in voluntary RIFs.

This document is a user`s guide to establishing layering standards for drawing development. Uniform layering standards are established to exchange of AutoCAD datasets between organizations and companies. Consistency in the layering conventions assists the user through logical separation and identification of drawing data. This allows the user to view and plot related aspects of a drawing separately or in combination. The use of color and Linetype by layer is the preferred layering convention method, however to accommodate specific needs, colors and linetypes can also be assigned on an entity basis. New drawing setup files (also identified in AutoCAD documentation as Prototype drawings) use this layering convention to establish discipline drawing layers that are routinely used. Additions, deletions or revisions to the layering conventions are encourage.

This report describes the AXAIR computer code which is available to terminal users for evaluating the doses to man from exposure to the atmospheric plume from postulated stack or building-vent releases at the Savannah River Plant. The emphasis herein is on documentation of the methodology only. The total-body doses evaluated are those that would be exceeded only 0.5 percent of the time based on worst-sector, worst-case meteorological probability analysis. The associated doses to other body organs are given in the dose breakdowns by radionuclide, body organ and pathway.

An analytic result for the O({alpha}{sub s}) corrections to the triple differential B {r_arrow} X{sub u} {ell} {bar {nu}}{sub {ell}} decay rate is presented, to leading order in the heavy-quark expansion. This is relevant for computing partially integrated decay distributions with arbitrary cuts on kinematic variables. Several double and single differential distributions are derived, most of which generalize known results. In particular, an analytic result for the O({alpha}{sub s}) corrections to the hadronic invariant mass spectrum is presented. The effects of Fermi motion, which are important for the description of decay spectra close to infrared sensitive regions, are included. The behavior of perturbation theory in the region of time-like momenta is also investigated.

Time Dependent Hartree-Fock theory, TDHF, is the most sophisticated, microscopic approach to nuclear dynamics yet practiced. Although it is far from a description of nature it does allow us to examine multiply interactive many-body systems semi quantum mechanically and to visualize otherwise covert processes. Some of the properties of the TDHF equations are stated leaving the interested reader to one of several excellent review articles for the derivations. Some of the applications to the collision of heavy ions are briefly described. (WHK)

The NLC Test Accelerator (NLCTA) at SLAC was built to address various beam dynamics issues for the Next Linear Collider. An S-Band RF gun is being installed together with a large-angle extraction line at 60 MeV followed by a matching section, buncher and final focus for the laser acceleration experiment, E163. The laser-electron interaction area is followed by a broad range, high resolution spectrometer (HES) for electron bunch analysis. Another spectrometer at 6 MeV will be used for analysis of bunch charges up to 1 nC. Emittance compensating solenoids and the low energy spectrometer (LES) will be used to tune for best operating point and match to the linac. Optical symmetries in the design of the 25.5{sup o} extraction line provide 1:1 phase space transfer without use of sextupoles for a large, 6D phase space volume and range of input conditions. Design techniques, tolerances, tuning sensitivities and orthogonal knobs are discussed.