Techniques were developed to measure the liquid density and viscosity of organic coolants over the temperature range 300 to 850 deg F. (W.L.H.)

From summary: Graphs of various gamma radiation spectra, taken by plotting data from a single channel pulse height analyzer, are compared with photographs of gamma radiation spectra presented on the tube face of the Hughes Memoscope Model 104.

The system Dovex 21K and aqueous uranyl sulfate solutions were studied in the solution compositions range: 0-0.005 mol/liter uranyl sulfate, 0.15 mil/liter total sulfate, 0.02 mol/liter H2SO4 (pH 2).It is shown that UO3SO4 and/or UO2(SO4)2-/2 are sorbed on the resin to form R2UO2(SO4)2. It is surmized that these same species are also involved at high uranyl concentrations and pH 2 it is suggested that U2O5SO4, U2O5(SO4)2-/2, and R2U2O3SO4 species may be involved.

BS>(((((Unscannable abstract)))))

The total K/sup +/-p cross section was measured at the three K/sup +/- meson energies 175 er inch per 25, 225 er inch per 25, and 275 er inch per 25 Mev and the differential scattering cross section was measured at 225 Mev. The K/sup +/-p nuclear force was shown to be repulsive from the observed constructive interference with Coulomb scattering. The differential c=oss section was otherwise isotropic and could arise from either pure S-wave or pure P- wave scattering. Subtracted dispersion relations were applied to these data and the rest of the available K proton scattering data. The statistical errors on the data were found to be too large to determine the K-hyperon relative parity. However, if the K DELTA and K SIGMA relative parities are assumed to be the same, then if the coupling were scalar, the coupling constant g/sup 2/4 pi would be less than 0.6; if pseudoscalar, less than 10. (auth)

Technical report of an investigation to determine a suitable material for sintering and casting of braze rings. Braze rings afford an excellent means of preplacing braze alloy on tube to head joints of radiators, heat exchangers, and similar applications. A cast ring is especially desirable because of its increased strength. Previous efforts at casting had used welding grade carbon blocks with the desired ring cavities machined into their surface. Conclusion: Stackpole grade 331 electro-graphite provided the best results of the materials investigation. It is hard and more readily machinable with conventional tools than other grades. Carbon, in general, proved to be more satisfactory especially due its ease and speed of fabrication.

Abstract: An alpha survey radiac employing a photomultiplier tube and scintillation detector has been developed. The instrument utilizes transistor circuitry and operates from two standard flashlight batteries. Four linear ranges are provided with full scale indication on the highest range corresponding to 10,000 g /m2 Pu2 39. The instrument was designed with .a separable probe and a telescoping extension for easier ground monitoring. A thorium metal source is attached to the instrument housing for checking instrument calibration in the field. The device conforms satisfactorily to the military requirements for altitude, humidity, vibration, shock, and storage. The operational battery life is in excess of 40 hours. Instrument error at low temperatures slightly exceeds the 20% accuracy requirement; however, adequate measurements are readily made by using the thorium check source to provide a check point. Instrument response to low energy X-rays is excessive. However, tests indicate that a simple lead filter will eliminate this difficulty.