This report provides background information regarding broad band over powerlines. The report discusses the federal communications commission activity, the national communication and information administration activity.

Pulses of 140 GHz microwaves have been produced at a 2 kHz rate using the ETA-III induction linac and IMP wiggler. The accelerator was run in bursts of up to 50 pulses at 6 MeV and greater than 2 kA peak current. A feedback timing control system was used to synchronize acceleration voltage pulses with the electron beam, resulting in sufficient reduction of the corkscrew and energy sweep for efficient FEL operation. Peak microwave power for short bursts was in the range 0.5--1.1 GW, which is comparable to the single-pulse peak power of 0.75--2 GW. FEL bursts of more than 25 pulses were obtained.

A letter report issued by the General Accounting Office with an abstract that begins "Business-owned life insurance is permanent insurance held by employers on the lives of their employees, and the employer is the beneficiary of these policies. Its attractive features, common to all permanent life insurance, generally include both tax-deferred accumulation of earnings on the policies' cash value and tax-free receipt of the death benefit. Legislators have expressed concerns about the ability of employers to receive tax-favored treatment from insuring their employees' lives. GAO was asked to discuss (1) the prevalence and use of business-owned life insurance, (2) federal and state regulation and oversight of these policies, and (3) the potential usefulness of and costs associated with obtaining more comprehensive data on business-owned life insurance."

A Pulse Forming Network (PFN), Helical Electromagnetic Launcher (HEML), Command Module (CM), and Calibration Table (CT) were built and evaluated for the combined ability to calibrate an accelerometer. The PFN has a maximum stored energy of 19.25 kJ bank and is fired by a silicon controlled rectifier (SCR), with appropriate safety precautions. The HEML is constructed out of G-10 fiberglass and is designed to accelerate 600 grams to 10 meters per second. The CM is microcontroller based running Arduino Software. The CM has a keypad input and 7 segment outputs of the bank voltage and desired voltage. After entering a desired bank voltage, the CM controls the charge of the PFN. When the two voltages are equal it allows the fire button to send a pulse to the SCR to fire the PFN and in turn, the HEML. The HEML projectile's tip hits a target that is held by the CT. The CT consists of a table to hold the PFN and HEML, a vacuum chuck, air bearing, velocity meter and catch pot. The Target is held with the vacuum chuck awaiting impact. After impact, the air bearing allows the target to fall freely for the velocity meter to get …

None

About 128 air samplers and CAMs presently in service to detect and document potential radioactive release from `H` and `F` area tank farm ventilation stacks are scheduled for replacement and/or upgrade by Projects S-5764, S-2081, S-3603, and S-4516. The seven CAMs scheduled to be upgraded by Project S-4516 during 1995 are expected to provide valuable experience for the three remaining projects. The attached document provides design guidance for the standardized High Level Waste air sampling system.

Patent for a new and improved coupling for railroad cars. This design "has for its object to provide a device of this character which shall be cheap and simple in its construction and thoroughly effective in its operation. The invention consists in the improved construction and combinations of parts" (lines 10-15).

Patent for an invention for train cars which "relates to car couplings, and especially to that class of the same which effect an automatic coupling by means of a gravity-hook," (lines 12-15) including instructions and illustrations.

Patent for casing point or strainer "particularly adapted for use in oil and Artesian wells... which will permit free circulation of the liquid around the lower portion of the casing and free and easy entrance of the same into the casing, and yet will prevent entrance of sand and gravel into the casing" (Lines 12-22).

Patent for a cattle-guard mounted on cross-ties and braces with exposed wires to permit identification of damaged wires and to be readily repaired without disturbing the remaining wires, which lists the parts for construction and illustration.

Patent for a cattle-holder, which provides the "novel means for confining cattle and holding them in an upright position against movement" (Lines 14-16).

This report provides an overview of U.S. policy concerns and relations with countries in central Asia. The report discusses issues such as Fostering Pro-Western Orientations, Obstacles to Peace and Independence, Democratization and Human Rights, Security and Arms Control, Trade and Investment, and provides an Aid Overview.

This report details the information related to the change of postal Zip code boundaries. The contents include background, concerns, Postal service attempts to resolve, etc.

None

Characterization Engineering (CE) continues to make progress in support of the project goal of characterizing the Hanford high-level waste tanks. Two core sampling systems were operational during this reporting period-push mode core sampling system No. 1 and rotary mode core sampling system No. 4. The availability average for core sampling systems No. 1 , No. 3 and No. 4, combined, was 45 percent, down from 79percent for the previous quarter and 58 percent for FY 1998. System No. 2 did not have scope during the quarter, and availability was not hacked. System No. 3 was out of service the entire quarter for corrective maintenance. Two tanks were core sampled during the reporting period, and 24 samples were retrieved. Core sample recovery increased slightly during the quarter. System No. 1 average sample recovery increased from 80percent to 81 percent, The rotary mode core sampling average recovery increased to 62 percent from 55 percent for the previous quarter. sampling six tanks, one more than scheduled. Vapor Sampling was utilized in support of the sluicing of tank 241-C-106 and for emissions monitoring of three exhaust stacks. Increased support was provided for Vapor Sampling the Standard Hydrogen Monitoring Systems. The sampling was necessary due …

We are testing a high-current-density high-brightness Argon-Ion Source for Heavy Ion Fusion applications. The 100-kV 20-{micro}s source has produced up to 5 mA of Ar{sup +} in a single beamlet. The extraction current density is 100 mA/cm2. We have measured the emittance of the beamlet, and the fraction of Ar{sup ++} ions under several operating conditions. We present measurements of the extracted current density as a function of RF power and gas pressure ({approx} 2 mT), current density uniformity, and energy dispersion (due to charge exchange). We are testing a 80-kV 61-hole multi-beamlet array that will produce a total current > 200 mA. In the current experiments the beamlets are not merged into a single beam. A 500-kV experiment where the beamlets will be merged to a produce 0.5-A beam is being planned.

We have studied hadron production in e/sup +/e/sup -/ annihilation at 29 GeV center of mass energy. We have measured the particle fractions and particle separated differential cross sections using the PEP-4 (Time Projection Chamber) detector. The particles were identified by measuring their ionization energy loss (dE/dx). The pion fraction decreases from above 90% at 400 MeV/c to 55% at 6 GeV/c. Our results for kaon production require that a large number of kaons are produced by strange quarks pulled from the vacuum. We have also measured R, the ratio of the total hadronic cross section to the mu pair cross section. Our value for R is 3.7 with an uncertainty of 10%. This value is in agreement with the results of other experiments and with the predictions of the quark-parton model.

Testimony issued by the General Accounting Office with an abstract that begins "In 2001, the Department of Health and Human Services' (HHS) Administration for Children and Families (ACF) implemented the Child and Family Services Reviews (CFSR) to increase states' accountability. The CFSR uses states' data profiles and statewide assessments, as well as interviews and an on-site case review, to measure state performance on 14 outcomes and systemic factors, including child well-being and the provision of caseworker training. The CFSR also requires progress on a program improvement plan (PIP); otherwise ACF may apply financial penalties. This testimony is based on our April 2004 report and addresses (1) ACF's and the states' experiences preparing for and conducting the statewide assessments and on-site reviews; (2) ACF's and the states' experiences developing, funding, and implementing items in PIPs; and (3) any additional efforts that ACF has taken beyond the CFSR to improve state performance. For the April 2004 report, we surveyed all 50 states, the District of Columbia, and Puerto Rico regarding their experiences throughout the CFSR process, visited 5 states to obtain first-hand information, and conducted a content analysis of all 31 available PIPs as of January 1, 2004. We also interviewed HHS …

This report provides background and elements of Child Support Enforcement (CSE) program, enacted in 1975, to help strengthen families by securing financial support for children from their non-custodial parent.

This report provides background on China's economic rise and current economic structure and the challenges China faces to keep its economy growing strong, and describes Chinese economic policies that are of concern to U.S. policymakers.

None

Coherent transition radiation is used to measure the length of the ultra-short electron bunches available at the Stanford Linear Accelerator Center. The results and the limitations of the method are described.

CH2M HILL Hanford Group, Inc. is identifying and developing supplemental process technologies to accelerate the Hanford tank waste cleanup mission. Bulk vitrification, containerized grout, and steam reforming are three technologies under consideration for treatment of the radioactive saltcake wastes in 68 single-shell tanks. To support development and testing of these technologies, Pacific Northwest National Laboratory (PNNL) was tasked with developing a cold dissolved saltcake simulant formulation to be representative of an actual saltcake waste stream, preparing 25- and 100-L batches of the simulant, and analyzing the composition of the batches to ensure conformance to formulation targets. Lacking a defined composition for dissolved actual saltcake waste, PNNL used available tank waste composition information and an equilibrium chemistry model (Environmental Simulation Program [ESP{trademark}]) to predict the concentrations of analytes in solution. Observations of insoluble solids in initial laboratory preparations for the model-predicted formulation prompted reductions in the concentration of phosphate and silicon in the final simulant formulation. The analytical results for the 25- and 100-L simulant batches, prepared by an outside vendor to PNNL specifications, agree within the expected measurement accuracy ({approx}10%) of the target concentrations and are highly consistent for replicate measurements, with a few minor exceptions. In parallel with the …

A recent concept for collective acceleration and focusing of a high energy electron bunch is discussed, in the context of its possible applicability to large linear colliders in the TeV range. The scheme can be considered to be a member of the general class of two-beam accelerators, where a high current, low voltage beam produces the acceleration fields for a trailing high energy bunch.