Factors Affecting Lateral Stability and Controllability (open access)

Factors Affecting Lateral Stability and Controllability

The effects on dynamic lateral stability and controllability of some of the important aerodynamic and mass characteristics are discussed and methods are presented for estimating the various stability parameters to be used in the calculation of the dynamic lateral stability of airplanes with swept and low-aspect-ratio wings.
Date: May 13, 1948
Creator: Campbell, John P. & Toll, Thomas A.
System: The UNT Digital Library
Time-History Data of Maneuvers Performed by a Lockheed F-94B Airplane During Squadron Operational Training (open access)

Time-History Data of Maneuvers Performed by a Lockheed F-94B Airplane During Squadron Operational Training

"Preliminary results of approximately 350 maneuvers of all types performed by a Lockheed F-94B jet interceptor airplane during normal operational training are presented in time-history form and are summarized as maximum load factors, control rates, angular accelerations, and sideslip angles plotted against indicated airspeed. The results were obtained from approximately 350 maneuvers performed by a Lockheed F-94B jet interceptor airplane during squadron operational training" (p. 1).
Date: May 13, 1953
Creator: Huss, Carl R.; Gainer, Patrick A. & Fisher, Raymond A.
System: The UNT Digital Library
Angle-of-attack-supersonic performance of a configuration consisting of a ramp-type scoop inlet located either on top or bottom of a body of revolution (open access)

Angle-of-attack-supersonic performance of a configuration consisting of a ramp-type scoop inlet located either on top or bottom of a body of revolution

From Introduction: "In reference 1, in which the performance of conical supersonic scoop inlets on circular fuselages is reported, the drag of the bottom-inlet configuration was considerably higher than for the top inlet."
Date: May 13, 1954
Creator: Kremzier, Emil J. & Campbell, Robert C.
System: The UNT Digital Library
Experimental performance of liquid fluorine-liquid ammonia propellant combination in 1000-pound-thrust rocket engines (open access)

Experimental performance of liquid fluorine-liquid ammonia propellant combination in 1000-pound-thrust rocket engines

"The performance of liquid fluorine and liquid ammonia as a propellant combination was evaluated in 1000-pound-thrust rocket engines operated at a chamber pressure of 600 pounds per square inch absolute. Values of specific impulse, characteristic velocity, thrust coefficient, and heat rejection were obtained as functions of propellant mixture ratio for each of four injectors: a triplet, a showerhead, and two like-on-like types" (p. 1).
Date: May 13, 1954
Creator: Douglass, Howard W.
System: The UNT Digital Library
Ignition of Ammonia and Mixed Oxides of Nitrogen in 200-Pound-Thrust Rocket Engines at 160 Degrees F (open access)

Ignition of Ammonia and Mixed Oxides of Nitrogen in 200-Pound-Thrust Rocket Engines at 160 Degrees F

Memorandum presenting a study of the ignition of ammonia and mixed oxides of nitrogen at 160 degrees Fahrenheit made with and without fuel additives utilizing small-scale rocket engines of approximately 200 pounds thrust. All experiments were conducted at sea-level pressures except two at a range of pressure altitudes. Results regarding the use of lithium as a catalyst, calcium as a catalyst, and no apparent catalyst are provided.
Date: May 13, 1954
Creator: Hennings, Glen; Ladanyi, Dezso J. & Enders, John H.
System: The UNT Digital Library
Performance characteristics of several short annular diffusers for turbojet engine afterburners (open access)

Performance characteristics of several short annular diffusers for turbojet engine afterburners

Report presenting a study of four short annular diffusers with different diffuser passage area variations and with various combinations of straightening vanes, vortex generators, splitters, and boundary layer suction for flow control. Results regarding turbine discharge whirl, diffuser passage modification, and boundary layer control are provided.
Date: May 13, 1954
Creator: Mallett, William E. & Harp, James L., Jr.
System: The UNT Digital Library
Performance of wedge-type boundary layer diverters for side inlets at supersonic speeds (open access)

Performance of wedge-type boundary layer diverters for side inlets at supersonic speeds

Report presenting an experimental investigation to determine the effect of several wedge-type boundary-layer diverters on drag and inlet pressure recovery in the 8- by 6-foot supersonic wind tunnel at Mach numbers of 1.5, 1.8, and 2.0. The model consisted of two rectangular ramp-type inlets mounted on the NACA RM-10 body of revolution. Results regarding variation of inlet pressure recovery and configuration drag with inlet mass-flow ratio, changes in the shock pattern off the inlet ramp, pressure-recovery-mass-flow characteristics, and drag coefficients are provided.
Date: May 13, 1954
Creator: Campbell, Robert C. & Kremzier, Emil J.
System: The UNT Digital Library
Stabilization of 50-Percent Magnesium - JP-4 Slurries With Some Aluminum Soaps of C(Sub 8) Acids (open access)

Stabilization of 50-Percent Magnesium - JP-4 Slurries With Some Aluminum Soaps of C(Sub 8) Acids

Report presenting an exploratory investigation of three aluminum disoaps of C(sub 8) acids to determine the gelling properties and stabilizing ability in slurries of 50 percent magnesium power and JP-4 fuel. All of the soaps were found to gel the slurries satisfactorily and to exhibit adequate reproducibility of gel properties. Results regarding the soap behaviors, effects of temperature, viscosity, and formation of the gel structures are provided.
Date: May 13, 1954
Creator: Caves, Robert M.
System: The UNT Digital Library
Experimental Evaluation of Swirl Can Elements for Hydrogen Fuel Combustor (open access)

Experimental Evaluation of Swirl Can Elements for Hydrogen Fuel Combustor

Memorandum presenting a study of the performance of swirl-can combustor elements for an experimental short-length turbojet combustor utilizing hydrogen fuel at high-altitude operating conditions. Fuel was injected into each element through a tangential, sonic orifice that created a swirling fuel-air mixture within each element. Results regarding combustor blowout, combustion efficiency, outlet temperature distribution, and preliminary performance of multielement combustor are provided.
Date: May 13, 1957
Creator: Rayle, Warren D.; Jones, Robert E. & Friedman, Robert
System: The UNT Digital Library
Experimental evaluation of 'swirl-can' elements for hydrogen-fuel combustor (open access)

Experimental evaluation of 'swirl-can' elements for hydrogen-fuel combustor

Report presenting a study of the performance of "swirl-can" combustor elements for an experimental short-length turbojet combustor utilizing hydrogen fuel at high-altitude operating conditions. Fuel was injected into each element through a tangential , sonic orifice that created a swirling fuel-air mixture within the element. Results regarding combustor blowout, combustion efficiency, outlet temperature distribution, and preliminary performance of the multielement performance of multielement combustor are provided.
Date: May 13, 1957
Creator: Rayle, Warren D.; Jones, Robert E. & Friedman, Robert
System: The UNT Digital Library
Effects of External Store-Pylon Configuration and Position on the Aerodynamic Characteristics of a 45 Degree Swept Wing-Fuselage Combination at a Mach Number of 1.61 (open access)

Effects of External Store-Pylon Configuration and Position on the Aerodynamic Characteristics of a 45 Degree Swept Wing-Fuselage Combination at a Mach Number of 1.61

Report presenting an investigation of a pylon-mounted-store airplane configuration in the supersonic pressure tunnel at a Mach number of 1.61. Forces and moments of a complete wing-fuselage-store-pylon combination was measured for a variety of pylon-mounted store locations below the wing. Results regarding the effect of store position on the aerodynamic characteristics in pitch, effect of store position on the aerodynamic characteristics in sideslip, store fins and store tail cone, double-store installation, effect of pylon location, and relative contribution of store-pylon forces toward total force are provided.
Date: May 13, 1958
Creator: Morris, Odell A.
System: The UNT Digital Library
Experimental Investigation of Extreme Internal Flow Turning at the Cowl Lip of an Axisymetric Inlet at a Mach Number of 2.95 (open access)

Experimental Investigation of Extreme Internal Flow Turning at the Cowl Lip of an Axisymetric Inlet at a Mach Number of 2.95

Memorandum presenting an experimental investigation of the pressure-recovery performance of a fixed-geometry, two-cone, two-drag inlet at Mach number 2.95. Low drag was achieved by use of an internally cylindrical cowl with rapid flow turning that was within 4 degrees of the wedge angle for shock detachment. Results regarding the inlet performance and evaluation of inlet performance are provided.
Date: May 13, 1958
Creator: Weston, Kenneth C. & Kowalski, Kenneth L.
System: The UNT Digital Library
Flight investigation of the aerodynamic forces on a wing-mounted external-store installation on the Douglas D-558-II research airplane (open access)

Flight investigation of the aerodynamic forces on a wing-mounted external-store installation on the Douglas D-558-II research airplane

Report presenting aerodynamic forces for an external-store installation on the Douglas D-558-II research airplane. Store-pylon, pylon-alone, and fin loads were determined during angle-of-attack and angle-of-sideslip maneuvers over a range of Mach numbers. Results regarding the side-force coefficients, normal-force coefficients, external-store-load parameters, external-store fin loads, and wing-panel aerodynamic loads are provided.
Date: May 13, 1958
Creator: Johnson, Clinton T.
System: The UNT Digital Library
Preliminary flight survey of fuselage and boundary-layer sound-pressure levels (open access)

Preliminary flight survey of fuselage and boundary-layer sound-pressure levels

Report presenting preliminary flight surveys of noise inside fuselages and in the fuselage boundary layer, which were obtained in order to determine the magnitude of the noise and relative importance of engine noise and noise due to the boundary layer. Results indicated that the sound-pressure level continued to increase with airspeed to the highest airspeed obtained, although the rate of increase at supersonic speeds was less than at subsonic speeds. Testing occurred on the B-47A and D-558-II airplanes.
Date: May 13, 1958
Creator: McLeod, Norman J. & Jordan, Gareth H.
System: The UNT Digital Library
Static Stability and Control Characteristics of a Triangular Wing and Canard Configuration at Mach Numbers Form 2.58 to 3.53 (open access)

Static Stability and Control Characteristics of a Triangular Wing and Canard Configuration at Mach Numbers Form 2.58 to 3.53

Report presenting the results of an investigation of the static longitudinal stability and control characteristics of a canard airplane configuration without analysis over a range of Mach numbers. Data are presented for various combinations of the body, canard, wings, and vertical tail at 0 and 5 degrees of sideslip over a range of angles of attack and canard deflection angles.
Date: May 13, 1958
Creator: Hedstrom, C. Ernest; Blackaby, James R. & Peterson, Victor L.
System: The UNT Digital Library