In March 1998, the 324 Building Fire Hazards Analysis (FHA) (Reference 1) was approved by the U S. Department of Energy, Richland Operations Office (DOE-RL) for implementation by B and W Hanford Company (BWHC). The purpose of the FHA was to identify gaps in compliance with DOE Order 5480.7A (Reference 2) and Richland Operations Office Implementation Directive (RLID) 5480.7 (Reference 3), especially in regard to loss limitation. The FHA identified compliance gaps in six areas and provided 20 recommendations to bring the 324 Building into compliance with DOE Order 5480 7A. Additionally, one observation was provided. A status is provided for each recommendation in this document. The actions for recommendations associated with the safety related part of the 324 Building and operation of the cells and support areas were evaluated using the Unreviewed Safety Question (USQ) process BWHC will use this Implementation Plan to bring the 324 Building and its operation into compliance with DOE Order 5480 7A and RLID 5480.7.

In March 1998, the 327 Building Fire Hazards Analysis (FHA) (Reference 1) was approved by the U.S. Department of Energy, Richland Operations Office (DOE-E) for implementation by B and W Hanford Company (BWC). The purpose of the FHA was to identify gaps in compliance with DOE Order 5480.7A (Reference 2) and Richland Operations Office Implementation Directive (RLID) 5480.7 (Reference 3), especially in regard to loss limitation. The FHA identified compliance gaps in five areas and provided nine recommendations (11 items) to bring the 327 Building into compliance. A status is provided for each recommendation in this document. BWHC will use this Implementation Plan to bring the 327 Building and its operation into compliance with DOE Order 5480.7A and IUD 5480.7.

No abstract currently available for this report as the present time.

The Chemical Structure and Dynamics (CS&D) program is a major component of the William R. Wiley Environmental Molecular Sciences Labo- ratory (EMSL), developed by Pacific Northwest National Laboratory (PNNL) to provide a state-of- the-art collaborative facility for studies of chemical structure and dynamics. We respond to the need for a fundamental, molecular-level understanding of chemistry at a wide variety of environmentally important interfaces by (1) extending the experimental characterization and theoretical description of chemical reactions to encompass the effects of condensed media and interfaces; (2) developing a multidisciplinary capability for describing interracial chemical processes within which the new knowledge generated can be brought to bear on complex phenomena in envi- ronmental chemistry and in nuclear waste proc- essing and storage; and (3) developing state-of- the-art analytical methods for characterizing com- plex materials of the types found in stored wastes and contaminated soils, and for detecting and monitoring trace atmospheric species. Our program aims at achieving a quantitative understanding of chemical reactions at interfaces and, more generally, in condensed media, compa- rable to that currently available for gas-phase reactions. This understanding will form the basis for the development of a priori theories for pre- dicting macroscopic chemical behavior in con- densed …

Our vision of the future of information systems is one that includes engineered collectives of software agents which are situated in an environment over years and which increasingly improve the performance of the overall system of which they are a part. At a minimum, the movement of agent and multi-agent technology into National Security applications, including their use in information assurance, is apparent today. The use of deliberative, autonomous agents in high-consequence/high-security applications will require a commensurate level of protection and confidence in the predictability of system-level behavior. At Sandia National Laboratories, we have defined and are addressing a research agenda that integrates the surety (safety, security, and reliability) into agent-based systems at a deep level. Surety is addressed at multiple levels: The integrity of individual agents must be protected by addressing potential failure modes and vulnerabilities to malevolent threats. Providing for the surety of the collective requires attention to communications surety issues and mechanisms for identifying and working with trusted collaborators. At the highest level, using agent-based collectives within a large-scale distributed system requires the development of principled design methods to deliver the desired emergent performance or surety characteristics. This position paper will outline the research directions underway at …

Methyltrioxorhenium (MTO) catalyzes the desulfurization of thiiranes by triphenylphosphine. Enormous enhancement in rate is observed when the catalyst is pretreated with hydrogen sulfide prior to the reaction. Using 2-mercaptomethylthiophenol as a ligand, the author synthesized several model complexes to study the mechanism of this reaction. With suitable model systems, they were able to show that the active catalyst is a Re(V) species. The reactions are highly stereospecific and very tolerant to functional groups. As part of the studies, he synthesized and crystallographically characterized the first examples of neutral terminal and bridging Re(V)sulfidocomplexes. Some of these complexes undergo fast oxygen atom transfer reactions with organic and inorganic oxidants. Studies on these model complexes led them to the discovery that MTO catalyzes the selective oxidation of thiols to disulfides. This report contains the Introduction; ``Chapter 6: Isomerization of Propargylic Alcohols to Enones and Enals Catalyzed by Methylrhenium Trioxide``; and Conclusions.

Measurements by the E802 Collaboration of the A-dependence and pseudorapidity interval ({delta}{eta}) dependence of mid-rapidity ET distributions in a half-azimuth electromagnetic calorimeter are presented for p+Be, p+Au, O+Cu, Si+Au and Au+Au collisions at the BNL-AGS. The issues addressed are (1) whether the shapes of the upper edges of the ET distributions vary with {delta}{eta} similarly to the variation in shapes of mid-rapidity charged particle distributions and (2) how small a {delta}{eta} interval would still give a meaningful characterization of the ''nuclear geometry'' of a reaction. A new way of plotting ET distributions was found from which the reaction dynamics could be read directly.

'The Savannah River Technology Center (SRTC) has participated in a round robin testing program which was conducted under the auspices of the Department of Energy''s (DOE) Tanks Focus Area (TFA) for Immobilization.'

Some recent theoretical results on coherent electromagnetic processes in ultrarelativistic heavy ion reactions are surveyed. In ultrarelativistic heavy ion collisions, Coulomb induced cross sections are huge, much larger than geometric. For the RHIC case of 100 GeV x 100 GeV colliding gold ions the predicted cross section for bound-electron positron pairs is about 110 barns. The corresponding cross section for continuum electron-positron pairs has recently been recalculated to be 34,000 barns, consistent with the result of the classic formula of Landau and Lifshitz. The cross section for Coulomb dissociation of the nucleus is about 95 barns, and the cross section for ionization of a single electron on one of the ions is about 100,000 barns.

The worldwide market share for crystalline-silicon solar cells has increased steadily in the last 10 years. In 1998, about 87% of the photovoltaic modules shipped worldwide are based on crystalline silicon. This dominance will likely continue into at least the first few years of the 21st century. The long-term growth of crystalline-silicon solar cells will depend on the development of low-cost polysilicon feedstock, silicon films, and advanced cell and module manufacturing processes.

'The primary purpose of this report is to document a Defense-in-Depth (DID) accident analysis evaluation for Department of Energy (DOE) Savannah River Site (SRS) Tritium Facility Buildings 232-H, 233-H, and 234-H. The purpose of a DID evaluation is to provide a more realistic view of facility radiological risks to the offsite public than the bounding deterministic analysis documented in the Safety Analysis Report, which credits only Safety Class items in the offsite dose evaluation.'

'The primary purpose of this report is to document a Defense-in-Depth (DID) accident analysis evaluation for Department of Energy (DOE) Savannah River Site (SRS) Tritium Facility Buildings 232-H, 233-H, and 234-H. The purpose of a DID evaluation is to provide a more realistic view of facility radiological risks to the offsite public than the bounding deterministic analysis documented in the Safety Analysis Report, which credits only Safety Class items in the offsite dose evaluation.'

A major problem with cavitation in pumps and other hydraulic devices is that there is no effective method for detecting or predicting its inception. The traditional approach is to declare the pump in cavitation when the total head pressure drops by some arbitrary value (typically 3o/0) in response to a reduction in pump inlet pressure. However, the pump is already cavitating at this point. A method is needed in which cavitation events are captured as they occur and characterized by their process dynamics. The object of this research was to identify specific features of cavitation that could be used as a model-based descriptor in a context-dependent condition-based maintenance (CD-CBM) anticipatory prognostic and health assessment model. This descriptor was based on the physics of the phenomena, capturing the salient features of the process dynamics. An important element of this concept is the development and formulation of the extended process feature vector @) or model vector. Thk model-based descriptor encodes the specific information that describes the phenomena and its dynamics and is formulated as a data structure consisting of several elements. The first is a descriptive model abstracting the phenomena. The second is the parameter list associated with the functional model. The …

Charge-coupled devices (CCD's) of novel design have been fabricated at Lawrence Berkeley National Laboratory (LBNL), and the first large-format science-grade chips for astronomical imaging are now being characterized at Lick Observatory. They are made on 300-μm thick n-type high-resistivity (~10,000 Ω-cm) silicon wafers, using a technology developed at LBNL to fabricate low-leakage silicon microstrip detectors for high-energy physics. A bias voltage applied via a transparent contact on the back side fully depletes the substrate, making the entire volume photosensitive and ensuring that charge reaches the potential wells with minimal lateral diffusion. The development of a thin, transparent back side contact compatible with fully depleted operation permits blue response comparable to that obtained with thinned CCD's. Since he entire region is active, high quantum efficiency is maintained to nearly λ = 1000 nm, above which the silicon bandgap effectively truncates photoproduction. Early characterization results indicate a charge transfer efficiency > 0.999995, readout noise 4 e's at -132°C, full well capacity > 300,000 e's, and quantum efficiency > 85% at λ = 900 nm.

The primary goals of this report are to (1) understand experimental radiography better (radiograph known static targets); and (2) to better understand the sources and effects of short wavelength perturbations on the long wavelength RT growth. Some secondary goals are to initiate Richtmyer-Meshkov mix targets; test beryllium cylinder implosions (if available); and observe emission spectroscopy from chlorinated foam to study implosions. To achieve these goals the authors: (1) shot mix targets with late backlighter and confirmed set up of radiography, begin static targets; (2) did a sequence of unperturbed and perturbed targets of different smoothness and thickness, fill in static, beryllium, and chlorinated foam targets; and (3) repeated step number 2 at a different backlighter time.

Drain and overflow holes are integral to the nuclear criticality safety basis of many processes and provide different functions inachieving their safety goaL Inmost cases at the Oak RidgeY-12 Plant, unverified engineering judgment has been previously used to conclude that the holes were adequate to accomplish their mission. Such judgment may adequately serve some configurations but is inadequate in other applications. It is important to understand and document the exact function of every drain for both normal and upset process conditions. After this is accomplished, the holes must be demonstrated to be capable of penlorming their intended safety fi,mction. This paper gives examples of different types of drains used for criticality safety, gives examples of how to ensure they will work as intended, and gives guidance to the analyst who relies on such holes to prevent criticality accidents.

'The waste glass produced in the SRS Defense Waste Processing Faiclity (DWPF) process must comply with Waste Acceptance Product Specifications (WAPS) and process control requirements by demonstrating, to a high degree of confidence, that melter feed will produce glass satisfying all quality and processing requirements.'

Correspondence issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO reviewed the audit report covering the financial statements of the United Service Organizations, Incorporated, for the years ended December 31, 1996 and 1997, focusing on whether the audit report complied with the financial reporting requirements of the law."

Two Forward Time Projection Chambers (FTPC) provide charge and momentum information in the pseudorapidity range between 2.5 < |{eta}| < 4.0. A radial TPC scheme is used, where ionization electrons drift in an electric field perpendicular to the axial solenoidal magnetic field. Curved proportional wire chambers with pad readout record the track information via 19200 electronic channels. We report on measurements with various gas mixtures in a prototype chamber with and without magnetic field. The design and construction of a curved readout chamber is described. Based on the prototype measurements and the final layout of the detector the expected performance in measuring accuracy and two-track-separation is given.

Using ORNL information on the characterization of the tank waste sludges, SRTC performed extensive bench-scale vitrification studies using simulants. Several glass systems were tested to ensure the optimum glass composition (based on the glass liquidus temperature, viscosity and durability) is determined. This optimum composition will balance waste loading, melt temperature, waste form performance and disposal requirements. By optimizing the glass composition, a cost savings can be realized during vitrification of the waste. The preferred glass formulation was selected from the bench-scale studies and recommended to ORNL for further testing with samples of actual OR waste tank sludges.

n-Butane selective oxidation over the VPO catalyst to maleic anhydride is the first and only commercialized process of light alkane selective oxidation. The mechanism of this reaction is still not well known despite over twenty years of extensive studies, which can partially be attributed to the extreme difficulties to characterize catalytic reactions real-time under typical reaction conditions. In situ spectroscopic characterization techniques such as Infrared spectroscopy and laser Raman spectroscopy were used in the current mechanistic investigations of n-butane oxidation over VPO catalysts. To identify the reaction intermediates, oxidation of n-butane, 1,3-butadiene and related oxygenates on the VPO catalyst were monitored using FTIR spectroscopy under transient conditions. n-Butane was found to adsorb on the VPO catalyst to form olefinic species, which were further oxidized to unsaturated, noncyclic carbonyl species. The open chain dicarbonyl species then experienced cycloaddition to form maleic anhydride. VPO catalyst phase transformations were investigated using in situ laser Raman spectroscopy. This report contains Chapter 1: General introduction; Chapter 2: Literature review; and Chapter 5: Conclusion and recommendations.

This dissertation focuses on the development of methods for stable isotope metabolic tracer studies in living systems using inductively coupled plasma single and dual quadrupole mass spectrometers. Sub-nanogram per gram levels of molybdenum (Mo) from human blood plasma are isolated by the use of anion exchange alumina microcolumns. Million-fold more concentrated spectral and matrix interferences such as sodium, chloride, sulfate, phosphate, etc. in the blood constituents are removed from the analyte. The recovery of Mo from the alumina column is 82 {+-} 5% (n = 5). Isotope dilution inductively coupled plasma mass spectrometry (ID-ICP-MS) is utilized for the quantitative ultra-trace concentration determination of Mo in bovine and human blood samples. The average Mo concentration in reference bovine serum determined by this method is 10.2 {+-} 0.4 ng/g, while the certified value is 11.5 {+-} 1.1 ng/g (95% confidence interval). The Mo concentration of one pool of human blood plasma from two healthy male donors is 0.5 {+-} 0.1 ng/g. The inductively coupled plasma twin quadrupole mass spectrometer (ICP-TQMS) is used to measure the carbon isotope ratio from non-volatile organic compounds and bio-organic molecules to assess the ability as an alternative analytical method to gas chromatography combustion isotope ratio mass spectrometry …

This dissertation is concerned with the interplay of long-range order and anisotropy in the tetragonal RNi{sub 2}Ge{sub 2} (R = rare earth) family of compounds. Microscopic magnetic structures were studied using both neutron and x-ray resonant exchange scattering (XRES) techniques. The magnetic structures of Tb, Dy, Eu and Gd members have been determined using high-quality single-crystal samples. This work has correlated a strong Fermi surface nesting to the magnetic ordering in the RNi{sub 2}Ge{sub 2} compounds. Generalized susceptibility, {chi}{sub 0}(q), calculations found nesting to be responsible for both incommensurate ordering wave vector in GdNi{sub 2}Ge{sub 2}, and the commensurate structure in EuNi{sub 2}Ge{sub 2}. A continuous transition from incommensurate to commensurate magnetic structures via band filling is predicted. The surprisingly higher T{sub N} in EuNi{sub 2}Ge{sub 2} than that in GdNi{sub 2}Ge{sub 2} is also explained. Next, all the metamagnetic phases in TbNi{sub 2}Ge{sub 2} with an applied field along the c axis have been characterized with neutron diffraction measurements. A mixed phase model for the first metamagnetic structure consisting of fully-saturated as well as reduced-moment Tb ions is presented. The moment reduction may be due to moment instability which is possible if the exchange is comparable to the low-lying …

This paper describes a method for machine or process system diagnostics that uses one-step prediction maps. The method uses nonlinear time series analysis techniques to form a one-step prediction map that estimates the next time series data point when given a sequence of previously measured time series data point. The difference between the predicted and measured time series values is a measure of the map error. The average value of this error should remain within some bound as long as both the dynamic system and its operating condition remain unchanged. However, changes in the dynamic system or operating condition will cause an increase in average map error. Thus, for a constant operating condition, monitoring the average map error over time should indicate when a change has occurred in the dynamic system. Furthermore, the map error itself forms a time series that can be analyzed to detect changes in system dynamics. The paper provides technical background in the nonlinear analysis techniques used in the diagnostic method, describes the creation of one-step prediction maps and their application to machine or process system diagnostics, and then presents results obtained from applying the diagnostic method to simulated and measured data.