Delta-stabilized plutonium can be welded to itself or almost any other metal using the inert-gas metal-arc process. Equipment and procedures suitable for the welding of delta-stabilized plutonium under various conditions are described.

The following report describes the electron spectrum of protactinium derived from 23 minute thorium 233 that was produced by neutron capture in stable thorium.

This report analyzes Parian and Teflon that were exposed to solutions of 1AX, 1AS, and 1AF, ANL June 1, 1948 Flowsheet, under conditions described in the following report.

A comparison of the simple impact theories of line broadening by electrons with the detailed computations of Kivel, Bloom, and Margenau.

Technical report. From "3. Methods of Preparation" : "Pivadehyde cyanohydrin can be prepared by the reaction of pivadehyde with anhydrous HCN2 or by the sodium bisulfite process. Trimethyllactamide can be prepared by hydrolysis of pivaldehyde cyanohydrin with cold concentrated sulfuric acid. The procedure described here differs in the scale of preparation an in the use of cold fusing hydrochloric acid for hydrolizing the cyanohydrin."

Prevailing dimensional tolerance for sintered UO₂ reactor fuel components to be enclosed in metal jackets are expensively small. For instance, the PWR fuel pellet, as of November, 1955, consisted of a centerless ground UO₂ cylinder 0.3560" (+0.0005", -0.000") in diameter and 0.3527" (±0.0008") long. This pellet was designed to fit in a Zircaloy tube 0.3585" (+0.0005", -0.0000") inside diameter. The use of UO₂ shapes as pressed, or extruded, and sintered with diameter variations controlled to a tolerance of ±0.003" to ±0.005" would represent a fabrication cost saving worth considering. It is reasonable to assume that the annulus between a sintered UO₂ shape and its container will vary as a function of time of irradiation. Shrinkage from the can walls occurs with relatively low density (i.e., 85% of theoretical) sintered irradiation (cf. MTR Test GEH-4-3C). Contrary to this effect, the thermal expansion coefficient of UO₂ is about twice that of Zircaloy. Of possibly greater significance is the inevitable fractuce of dense UO₂ due to thermal stress. Such cracking effectively relocates the annular heat transfer gap to the interior of the oxide where the higher temperatures enhance the heat transfer coefficient. Thus, possibly the worst condition, with respect to heat transfer, is …

The purpose of this report is to describe the nuclear power plant for the N.S. Savannah and the program in progress for the analysis of potential hazards associated with the operation of a nuclear merchant vessel. Particular emphasis is given to the safety features embodied both in the design and operation of the plant.

This report describes the design procedure for a reflectometer or directional coupler to replace the probe part of the D07-1020 assembly used at the Brookhaven Alternating Gradient Synchrotron linac. Mathematical treatment and diagrams of various reflectometers are included.

Use of the Smith chart in studying stub tuners is demonstrated. Several properties of the tuners are shown, and charts for various wave length spacings, tuning trajectories, and admittances are included.