Processing method for superconducting ceramics (open access)

Processing method for superconducting ceramics

A process for preparing a superconducting ceramic and particularly YBa{sub 2}Cu{sub 3}O{sub 7-{delta}}, where {delta} is in the order of about 0.1--0.4, is carried out using a polymeric binder which decomposes below its ignition point to reduce carbon residue between the grains of the sintered ceramic and a nonhydroxylic organic solvent to limit the problems with water or certain alcohols on the ceramic composition.
Date: May 7, 1990
Creator: Bloom, I. D.; Poeppel, R. B. & Flandermeyer, B. K.
Object Type: Patent
System: The UNT Digital Library
Experience with Position Sensitive Neutron Detectors at the Intense Pulsed Neutron Source (open access)

Experience with Position Sensitive Neutron Detectors at the Intense Pulsed Neutron Source

At the Intense Pulsed Neutron Source (IPNS) pulses of protons accelerated in a synchrotron produce pulses of fast neutrons via the spallation process in an enriched uranium target. After moderation, the resulting pulses of slow neutrons are directed into beams which serve a variety of neutron scattering instruments. Currently there are thirteen neutron scattering instruments in operation or under development at IPNS, and six of these use position-sensitive neutron detectors (PSDs). These PSDs are: a 30 cm {times} 30 cm, {approximately}3 mm resolution, neutron Anger camera area PSD with {sup 6}Li-glass scintillator; a 2.5 cm dia, {approximately}0.7 mm resolution, microchannel-plate area PSD with {sup 6}Li-glass scintillator; a 20 cm {times} 20 cm, {approximately}5 mm resolution, {sup 3}He proportional counter area PSD; a 40 cm {times} 40 cm, {approximately}4 mm resolution, {sup 3}He proportional counter area PSD; a flat 20 cm long, {approximately}1.6 mm resolution, {sup 3}He proportional counter linear PSD; and 160 cylindrical {sup 3}He proportional counter linear PSDs, each of which is 1.27 cm in dia 60 cm long and has {approximately}14 mm resolution. These detectors, in addition to being position-sensitive, resolve the time of the neutron capture with {approximately}1 {mu}s precision for neutron time-of-flight measurements. This paper will …
Date: May 7, 1990
Creator: Crawford, R. K.; Haumann, J. R.; Schultz, A. J.; Felcher, G. P.; Epperson, J. E.; Thiyagarajan, P. et al.
Object Type: Article
System: The UNT Digital Library
Bioechnology of indirect liquefaction (open access)

Bioechnology of indirect liquefaction

The project on biotechnology of indirect liquefaction was focused on conversion of coal derived synthesis gas to liquid fuels using a two-stage, acidogenic and solventogenic, anaerobic bioconversion process. The acidogenic fermentation used a novel and versatile organism, Butyribacterium methylotrophicum, which was fully capable of using CO as the sole carbon and energy source for organic acid production. In extended batch CO fermentations the organism was induced to produce butyrate at the expense of acetate at low pH values. Long-term, steady-state operation was achieved during continuous CO fermentations with this organism, and at low pH values (a pH of 6.0 or less) minor amounts of butanol and ethanol were produced. During continuous, steady-state fermentations of CO with cell recycle, concentrations of mixed acids and alcohols were achieved (approximately 12 g/l and 2 g/l, respectively) which are high enough for efficient conversion in stage two of the indirect liquefaction process. The metabolic pathway to produce 4-carbon alcohols from CO was a novel discovery and is believed to be unique to our CO strain of B. methylotrophicum. In the solventogenic phase, the parent strain ATCC 4259 of Clostridium acetobutylicum was mutagenized using nitrosoguanidine and ethyl methane sulfonate. The E-604 mutant strain of Clostridium …
Date: May 7, 1990
Creator: Datta, R.; Jain, M. K.; Worden, R. M.; Grethlein, A. J.; Soni, B.; Zeikus, J. G. et al.
Object Type: Report
System: The UNT Digital Library
Bioechnology of indirect liquefaction. Final report (open access)

Bioechnology of indirect liquefaction. Final report

The project on biotechnology of indirect liquefaction was focused on conversion of coal derived synthesis gas to liquid fuels using a two-stage, acidogenic and solventogenic, anaerobic bioconversion process. The acidogenic fermentation used a novel and versatile organism, Butyribacterium methylotrophicum, which was fully capable of using CO as the sole carbon and energy source for organic acid production. In extended batch CO fermentations the organism was induced to produce butyrate at the expense of acetate at low pH values. Long-term, steady-state operation was achieved during continuous CO fermentations with this organism, and at low pH values (a pH of 6.0 or less) minor amounts of butanol and ethanol were produced. During continuous, steady-state fermentations of CO with cell recycle, concentrations of mixed acids and alcohols were achieved (approximately 12 g/l and 2 g/l, respectively) which are high enough for efficient conversion in stage two of the indirect liquefaction process. The metabolic pathway to produce 4-carbon alcohols from CO was a novel discovery and is believed to be unique to our CO strain of B. methylotrophicum. In the solventogenic phase, the parent strain ATCC 4259 of Clostridium acetobutylicum was mutagenized using nitrosoguanidine and ethyl methane sulfonate. The E-604 mutant strain of Clostridium …
Date: May 7, 1990
Creator: Datta, R.; Jain, M. K.; Worden, R. M.; Grethlein, A. J.; Soni, B.; Zeikus, J. G. et al.
Object Type: Report
System: The UNT Digital Library
Texas Attorney General Opinion: LO90-22 (open access)

Texas Attorney General Opinion: LO90-22

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification; Can the county legally buy culverts and resell them to private citizens? ; Can the county legally buy culverts and resell them to property owners for use in accessing private property from a county road? ; When the county purchases a steel culvert and installs it on the county right of way going onto private driveways is it legal for the property owners to reimburse the county for the cost of the steel culvert? ; When a property owner needs a culvert installed to access his private property from a county road is he responsible for purchasing the culvert or is the county responsible? To whom does the culvert belong?
Date: May 7, 1990
Creator: Texas. Attorney-General's Office.
Object Type: Text
System: The Portal to Texas History