The RELAP5/Mod3.1 computer program has been used to successfully perform thermal-hydraulic analyses to support the Safety Analysis for increasing the MNRC reactor from 1.0 MW to 2.0 MW. The calculation results show the reactor to have operating margin for both the fuel temperature and critical heat flux limits. The calculated maximum fuel temperature of 705 C is well below the 750 C operating limit. The critical heat flux ratio was calculated to be 2.51.

The general objectives are to (1) to identify and develop gelled polymer systems which have potential to improve reservoir conformance of fluid displacement processes, (2) to determine the performance of these systems in bulk and in porous media, and (3) to develop methods to predict the capability of these systems to recover oil from petroleum reservoirs. This work focuses on three types of gel systems - an aqueous polysaccharide (KUSP1) system that gels as a function of pH, the chromium(III)-polyacrylamide system and the aluminum citrate-polyacrylamide system. Laboratory research is directed at the fundamental understanding of the physics and chemistry of the gelation process in bulk form and in porous media. This knowledge will be used to develop conceptual and mathematical models of the gelation process. Mathematical models will then be extended to predict the performance of gelled polymer treatments in oil reservoirs. Technical progress of Task III, mechanisms of in situ gelation is presented in this progress report.

Newsletter distributed to the Low-Level Radioactive Waste Forum members describing current news, policies, and legislation, as well as other information relevant to the management of low-level radioactive waste.

With statistical analysis of global data from one, two and four stellarators, it is possible to draw limited conclusions whether Gyro- Bohm or Bohm scaling prevails. Either scaling may be favored, depending on whether corrections are included for possible {Beta} and v{sub *} corrections and whether all data are taken, or selected cases with low collisionality, or low net toroidal current, or with ECH heating applied, and so on. Monte Carlo-like simulations are used to test reliability of inferences about power-law scaling exponents made from data having substantial statistical variance and collinearity of control parameters. These show that for reliable conclusions, statistical studies should be augmented; more directed experimental studies are needed, with well controlled discharges and radially resolved data - such as those already begun on ATF and W7-AS.

A half reactor test was initiated at B Reactor on February 1, 1967, to determine whether the concentration of P{sup 32} and As{sup 76} in the reactor effluent water would be reduced by the addition of activated alumina in the water treatment process. This test was prompted by the reported effectiveness of activated alumina in sorption of phosphates when water flow is through a packed bed of this material. Although direct feed of material would not be expected to be as effective, testing of this possible approach appeared warranted. This report summarizes the results of this test. Samples taken from each effluent riser during reactor operation indicated no improvement in either As{sup 76} or P{sup 32} performance. This comparison is shown below with a complete tabulation of daily values included as Attachment 1.

In the last 5 years, significant technology advances have been made in the performance, size, and cost of solid-state diode-pumped lasers. These developments enable the use of compact Q-switched Nd:YAG lasers as a beam diagnostic for high current H{sup {minus}} beams. Because the threshold for photodetachment is only 0.75 eV, and the maximum detachment cross section is 4 {times} 10{sup {minus}17} cm{sup 2} at 1.5 eV, a 50 mJ/pulse Q-switched Nd:YAG laser can neutralize a significant fraction of the beam in a single 10-ns wide pulse. The neutral beam maintains nearly identical parameters as the parent H{sup {minus}} beam, including size, divergence, energy, energy spread, and phase spread. A dipole magnet can separate the neutral beam from the H{sup {minus}} beam to allow diagnostics on the neutral beam without intercepting the high-current H{sup {minus}} beam. Such a laser system can also be used to extract a low current proton beam, or to induce fluorescence in partially stripped heavy ion beams. Possible beamline diagnostic systems will be reviewed, and the neutral beam yields will be calculated.

As part of international agreement between the United States and Russia, a significant amount of plutonium requires disposition. One of the disposition paths is to immobilize it and dispose of it in a geological repository. The two favored immobilization forms are glass and ceramic. The plutonium, as an oxide, would be reacted with the glass or ceramic to form a homogeneousmaterial. The resulting solid product would then be encased in High-Level Waste (1-ILW)glass for the can-in-canister option. The HLW glass gives a radiation barrier to increase proliferation resistance. The glass canister would then be disposed of by geological emplacement. This paper discusses how glass meets two criteria: the condition of significant actinide volubility, and That the PuO{sub 2} feed should be incorporated into the matrix without significant amount of unreacted material.

Negative-parity excitations in the 2.5 MeV region in {sup 112}Cd have been investigated with the (n,n`{gamma}) reaction. Several of these states exhibit enhanced B(E2) values for L decay to the 3{sub 1}{sup -} octupole state, indicative of quadrupole-octupole coupled (2{sup +} {circle_times} 3{sup -}) structures. The B(E1) values observed are typically in the range of 1-5 x 1O{sup -4} W u , irrespective of the final state.

This document summarizes the information on the historical uses, present status, and the sampling and analysis results of waste, stored in Tank 241-BX-111. This report supports the requirements of the Tri-Party Agreement Milestone M-44-ISB.

Froth flotation technique is an effective and efficient process for recovering of ultra-fine (minus 74 {mu}m) clean coal. Economical dewatering of an ultra-fine clean coal product to a 20 percent level moisture will be an important step in successful implementation of the advanced cleaning processes. This project is a step in the Department of Energy`s program to show that ultra-clean coal could be effectively dewatered to 20 percent or lower moisture using either conventional or advanced dewatering techniques. The cost-sharing contract effort is for 36 months beginning September 30, 1994. This report discusses technical progress made during the quarter from January 1 to March 31, 1995.

A hydrologic test system has been designed to measure the intrinsic permeabilities of individual fractures in crystalline rock. This system is used to conduct constant pressure-declining flow rate and pressure pulse hydraulic tests. The system is composed of four distinct units: (1) the Packer System, (2) Injection system, (3) Collection System, and (4) Electronic Data Acquisition System. The apparatus is built in modules so it can be easily transported and re-assembled. It is also designed to operate over a wide range of pressures (0 to 300 psig) and flow rates (0.2 to 1.0 gal/min). This system has proved extremely effective and versatile in its use at the Climax Facility, Nevada Test Site.

An empirical study was conducted to evaluate cutting fluids for Single Point Diamond Turning (SPDT) of single crystal silicon. The pH of distilled waster was adjusted with various additives the examine the effect of pH on cutting operations. Fluids which seemed to promote ductile cutting appeared to increase tool wear as well, an undesirable tradeoff. High Ph sodium hydroxide solutions showed promise for further research, as they yielded the best combination of reduced tool wear and good surface finish in the ductile regime. Negative rake tools were verified to improve the surface finish, but the negative rake tools used in the experiments also showed much higher wear than conventional 0{degree} rake tools. Effects of crystallographic orientation on SPDT, such as star patterns of fracture damage forming near the center of the samples, were observed to decrease with lower feedrates. Silicon chips were observed and photographed, indicative of a ductile materials removal process.

Using an end-pumped technology developed at LLNL we have demonstrated a Yb:YAG laser capable of delivering up to 434 W of CW power and 280 W of Q-switched power. In addition, we have frequency doubled the output to 515 nm using a dual crystal scheme to produce 76 W at 10 kHz in a 30 ns pulse length.

IMTR is a tremendous undertaking to assess the current state and future needs of Manufacturing Technology R&D. A follow-on project to the roadmaps is the development and populating of a Gap Analysis database containing current R&D abstracts related to the roadmaps' technical elements. Efficiently identifying the R&D projects within scope presents many travails of synthesizing data from across a wide spectrum. Challenges to this project were directly proportional to the lack of single-source data collections.

Information management is moving quickly toward archiving and retrieving documents electronically, so Oak Ridge National Laboratory (ORNL) is taking steps to help its research staff create electronic documents. Declining budgets frequently dictate that authors handle the technicalities of getting published as well as the scientific and technical information that they publish. To help the Laboratory benefit from being the leader in this area, ORNL'S Information Management Section formed a multidisciplinary team to develop, pilot, and implement a Web- based process to register and clear technical documents and to add the fill text of these documents to the Laboratory's Comprehensive Publications and Presentations Registry (CPPR). Making this happen required implementing policy changes to address the new performance measure, acquiring software needed for file conversion, developing Web guidance, and providing training and consulting for ORNL staff.

We have started a search for High Redshift Radio Galaxies (HZRGS) in an area covering 7 sr by selecting a sample of Ultra Steep Spectrum (USS) sources with a low flux density cut-off S1400 > 10 mJy and a steep spectral index cut-off of a < -1.3 (S of about nu-alpha) from the WENSS, NVSS and TEXAS surveys. Our first results for 27 sources show that we are almost twice as effective in finding HZRGs than than surveys of relatively bright radio sources with a spectral index cut-off of a < - 1.0. The redshift distribution is consistent with an extension of the z - a relation to a < -1.3, but a large fraction of our sample (40%) consists of objects which are too faint to observe with 3-4 m class telescopes. Our search is aimed at increasing the number of very high redshift radio galaxies for further detailed studies of the formation and evolution of massive galaxies and their environment.

We created three models to represent a comprehensive knowledge model: · Stages of Knowledge Management Model (Forrester) · Expanded Life-Cycle Information Management Model · Organizational Knowledge Management Model. In building a series of models, we started with an attempt to create a graphical model that illustrates the ideas outlined in the Forrester article (Leadership Strategies, Vol. 3, No. 2, November/December 1997). We then expanded and detailed a life-cycle model. Neither of these effectively reflected how to manage the complexities involved in weaving local, enterprise, and global information into an easily navigated resource for end users. We finally began to synthesize these ideas into an Organizational Knowledge Management Model. This model acknowledges the relevance of life-cycle management for different granularities of information collections and places it in the context of the integrating infrastructure needed to assist end users.

Monthly newsletter discussing news and activities related to the Atmospheric Radiation Measurement Program, articles about weather and atmospheric phenomena, and other related topics.

Plans to eliminate the positron accumulator ring (PAR) from the Advanced Photon Source (APS) injector complex have created the need for a device to limit the allowable beam charge injected into the APS injector synchrotrons. The beam shut-off current monitor (BESOCM) was chosen to provide this function. This new application of the BESOCM provided the opportunity to explore new design philosophies. Two design goals were to de-emphasize reliance on external signals and to become insensitive to timing variations. Both of these goals were accomplished by deriving the trigger directly from the beam. This paper will discuss the features of the new BESOCM design and present data demonstrating its function.

The halogenated aliphatic hydrocarbon trichlorofluoromethane has been widely used as a refrigerant and aerosol propellant.

An investigation of the synthesis of novel dodecaarylporphyrins using the Suzuki coupling reaction of arylboronic acids with octabromotetraarylporphyrins is reported. Studies of the dynamic properties of these new porphyrins using variable temperature (VT) <SUP>1</SUP>H NMR spectroscopy and molecular mechanics provide interesting insights into their dynamic properties, including the first determination of {beta} aryl rotation in a porphyrin system.

The French and British nuclear programs have prepared a series of natural uranium oxide fuel samples spiked with small amounts of the individual fission products which makeup a large fraction of the total neutron absorption by fission products in spent nuclear fuel. Both programs have utilized these samples in experimental reactors and have inferred the worth of the individual fission products. These results have been used to validate the cross sections used in criticality safety calculations. These measurements constitute a major element in support of spent fuel burnup credit in these countries.

Two one-segment core samples from tank 241-U-203 (U-203) were received by the 222-S Laboratories and underwent safety screening analysis, consisting of differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and total alpha activity. In addition to the safety screening requirements, inductively coupled plasma (ICP) spectrographic analysis for lithium was performed to determine the extent of hydrostatic head fluid contamination during the sampling event. No notification limits were exceeded for these analyses.

A review is given of the prospects for future colliders and collider physics at the energy frontier. A proof-of-plausibility scenario is presented for maximizing the authors progress in elementary particle physics by extending the energy reach of hadron and lepton colliders as quickly and economically as might be technically and financially feasible. The scenario comprises 5 colliders beyond the LHC--one each of e{sup +}e{sup {minus}} and hadron colliders and three {mu}{sup +}{mu}{sup {minus}} colliders--and is able to hold to the historical rate of progress in the log-energy reach of hadron and lepton colliders, reaching the 1 PeV constituent mass scale by the early 2040's. The technical and fiscal requirements for the feasibility of the scenario are assessed and relevant long-term R and D projects are identified. Considerations of both cost and logistics seem to strongly favor housing most or all of the colliders in the scenario in a new world high energy physics laboratory.