In this contribution I am going to discuss the development of large arrays of Compton Suppressed, High Purity Germanium (HpGe) detectors and the physics that has been, that is being, and that will be done with them. These arrays and their science have dominated low-energy nuclear structure research for the last twenty years and will continue to do so in the foreseeable future. John Sharpey Schafer played a visionary role in convincing a skeptical world that the development of these arrays would lead to a path of enlightenment. The extent to which he succeeded can be seen both through the world-wide propagation of ever more sophisticated devices, and through the world-wide propagation of his students. I, personally, would not be working in research if it were not for Johns inspirational leadership. I am eternally grateful to him. Many excellent reviews of array physics have been made in the past which can provide detailed background reading. The review by Paul Nolan, another ex-Sharpey Schafer student, is particularly comprehensive and clear.

The design, installation and performance data of a 20 W pulsed laser system for the 3 meter Shane telescope at the Lick Observatory is presented.

Modern third generation storage rings, require state-of-the-art grazing incidence x-ray optics, in order to monochromate the Synchrotrons Radiation (SR) source photons, and focus them into the experimental stations. Slope error tolerances in the order of 0.5 {micro}Rad RMS, and surface roughness well below 5 {angstrom} RMS, are frequently specified for mirrors and gratings exceeding 300 mm in length. Non-contact scanning instruments were developed, in order to characterize SR optical surfaces, of spherical and aspherical shape. Among these, the Long Trace Profiler (LTP), a double pencil slope measuring interferometer, has proved to be particularly reliable, and was adopted by several SR optics metrology laboratories. The ELETTRA soft x-rays and optics metrology laboratory, has operated an LTP since 1992. We review the basic operating principles of this instrument, and some major instrumental and environmental improvements, that were developed in order to detect slope errors lower than 1 {micro}Rad RMS on optical surfaces up to one metre in length. A comparison among measurements made on the same reference flat, by different interferometers (most of them were LTPs) can give some helpful indications in order to optimize the quality of measurement.

Research needs include, but are not limited to: measurement of basic thermodynamic data at elevated temperatures for species identified by modelers as potentially important; evaluation of substances which control or limit precipitation and/or nucleation kinetics; sorption studies specifically designed to provide data needed for modeling. This includes the rate of sorption, desorption, and the characterization of the solid and aqueous phases; site-mixing models and thermodynamic data for secondary minerals that form solid solutions; the development of standard techniques for measuring rate laws for precipitation and dissolution kinetics; and measurement of rate laws describing redox kinetics, dissolution, and precipitation involving aqueous species and solid phases of interest to geochemical modelers.

The authors conducted perforation experiments with 4340 Rc 38 and T-250 maraging steel, long rod projectiles and HY-100 steel target plates at striking velocities between 80 and 370 m/s. Flat-end rod projectiles with lengths of 89 and 282 mm were machined to nominally 30-mm-diameter so they could be launched from a 30-mm-powder gun without sabots. The target plates were rigidly clamped at a 305-mm-diameter and had nominal thicknesses of 5.3 and 10.5 mm. Four sets of experiments were conducted to show the effects of rod length and plate thickness on the measured ballistic limit and residual velocities. In addition to measuring striking and residual projectile velocities, they obtained framing camera data on the back surfaces of several plates that showed clearly the plate deformation and plug ejection process. They also present a beam model that exhibits qualitatively the experimentally observed mechanisms.

The intermetallic compound, molybdenum disilicide (MoSi{sub 2}) is being considered for high temperature structural applications because of its high melting point and superior oxidation resistance at elevated temperatures. The lack of high temperature strength, creep resistance and low temperature ductility has hindered its progress for structural applications. Plasma spraying of coatings and structural components of MoSi{sub 2}-based composites offers an exciting processing alternative to conventional powder processing methods due to superior flexibility and the ability to tailor properties. Laminate, discontinuous and in situ reinforced composites have been produced with secondary reinforcements of Ta, Al{sub 2}O{sub 3}, SiC, Si{sub 3}N{sub 4} and Mo{sub 5}Si{sub 3}. Laminate composites, in particular, have been shown to improve the damage tolerance of MoSi{sub 2} during high temperature melting operations. A review of research which as been performed at Los Alamos National Laboratory on plasma spraying of MoSi{sub 2}-based composites to improve low temperature fracture toughness, thermal shock resistance, high temperature strength and creep resistance will be discussed.

A better understanding of the formation of large-scale structure in the Universe is arguably the most pressing question in cosmology. The most compelling and promising theoretical paradigm, Inflation + Cold Dark Matter, holds that the density inhomogeneities that seeded the formation of structure in the Universe originated from quantum fluctuations arising during inflation and that the bulk of the dark matter exists as slowing moving elementary particles (cold dark matter) left over from the earliest, fiery moments. Large redshift surveys (such as the SDSS and 2dF) and high-resolution measurements of CBR anisotropy (to be made by the MAP and Planck Surveyor satellites) have the potential to decisively test Inflation + Cold Dark Matter and to open a window to the very early Universe and fundamental physics.

The conventional approach to treating charged defects in extended systems in first principles calculations is via the supercell approximation using a neutralizing jellium background charge. I explicitly demonstrate shortcomings of this standard approach and discuss the consequences. Errors in the electrostatic potential surface over the volume of a supercell are shown to be comparable to a band gap energy in semiconductor materials, for cell sizes typically used in first principles simulations. I present an alternate method for eliminating the divergence of the Coulomb potential in supercell calculations of charged defects in extended systems that embodies a correct treatment of the electrostatic potential in the local viciniq of the a charged defect, via a mixed boundary condition approach. I present results of first principles calculations of charged vacancies in NaCl that illustrate the importance of polarization effects once an accurate representation of the local potential is obtained. These polarization effects, poorly captured in small supercells, also impact the energetic on the scale of typical band gap energies.

The transport properties of a quasi-three-dimensional, 200 layer quantum well structure are investigated at integer filling in the quantum Hall state. We find that the transverse magnetoresistance R_xx, the Hall resistance R_xy, and the vertical resistance R_zz all follow a similar behavior with both temperature and in-plane magnetic field. A general feature of the influence of increasing in-plane field B_in is that the Hall conductance quantization first improves, but above a characteristic value B^C_in, the quantization is systematically removed. We consider the interplay of the chid edge state transport and the bulk (quantum Hall) transport properties. This mechanism may arise from the competition of the cyclotron energy with the superlattice band structure energies. A comparison of the resuIts with existing theories of the chiral edge state transport with in-plane field is also discussed.

A new method of ultrasensitive trace-isotope analysis has been developed based upon the technique of laser manipulation of neutral atoms. It has been used to count individual {sup 85}Kr and {sup 81}Kr atoms present in a natural krypton sample with isotopic abundances in the range of 10{sup {minus}11} and 10{sup {minus}13}, respectively. The atom counts are free of contamination from other isotopes, elements,or molecules. The method is applicable to other trace-isotopes that can be efficiently captured with a magneto-optical trap, and has a broad range of potential applications.

The surface termination of c-axis oriented YBa{sub 2}Cu{sub 3}O{sub 7{minus}{delta}} (YBCO) and the oxygen incorporation mechanism has been investigated using a unique combination of spectroscopic ellipsometry (SE) and time of flight ion scattering and recoil spectrometry (ToF-ISARS). The high surface sensitivity of the ToF-ISARS technique combined with the bulk oxygen sensitivity of SE are shown to yield complimentary information. The SE provided the film orientation and quality, while ToF-ISARS supplied surface compositional and structural information and enabled isotopic {sup 18}O tracer studies. It was determined that the O content of the film had little effect on the surface termination of the film, indicating a lack of labile Cu(1) sites at the c-axis oriented YBCO surface. Also, strong evidence for a Ba or BaO terminated structure is shown. The data related to the {sup 18}O tracer studies indicate that O from the reaction ambient incorporates only into the labile Cu(1) sites during both deposition and annealing, while stable O sites were populated with O from the sputtered target, indicating either the need for sputtered atomic O or sputtered YCuO complexes to occupy the stable Cu(2) sites.

We evaluate hydrazine (Hy) as a nitrogen precursor source for the growth of GaNAs and GaInNAs for application in 1-eV solar cells lattice-matched to GaAs, and compare it to the more commonly used dimethylhydrazine (DMHy). The incorporation efficiency of N into the GaNAs alloy is found to be one to two orders of magnitude higher with Hy than with DMHy. This high N incorporation makes convenient the growth of GaNAs at higher growth temperatures, Tg=650 C, and arsine flows, AsH3/III=44, than are generally possible with the use of DMHy. GaInNAs and GaNAs solar cells are grown under these growth conditions and compared to a GaAs cell grown under the same conditions to determine the extent to which the poor minority-carrier properties routinely observed for the N-containing material can be attributed to the growth conditions. Finally, the background carrier concentrations for Hy- and DMHy-grown material are compared, and little difference is found between the two sources..

We have fabricated 15.4%- and 12.4%-efficient CuIn1-XGaXSe2 (CIGS)-based photovoltaic devices from solution-based electrodeposition (ED) and electroless-deposition (EL) precursors. As-deposited precursors are Cu-rich CIGS. Additional In, Ga, and Se are added to the ED and EL precursor films by physical vapor deposition (PVD) to adjust the final film composition to CuIn1-XGaXSe2. The ED and EL device parameters are compared with those of a recent world record, an 18.8%-efficient PVD device. The tools used for comparison are current voltage, capacitance voltage, and spectral response characteristics.

During the transport of tank waste, it is very important to quantitatively measure the percent solids concentration (PSC) of the waste, which indicates the flow conditions and the extent of solids settling. At Argonne National Laboratory, an in-line, real-time, a nonintrusive ultrasonic monitoring system has been developed to measure the PSC and flow density of tank waste by measuring sound velocity and attenuation in the flow. This system consists of a pair of longitudinal transducers bonded to waveguides on the opposite sides of the pipe and operating at IMHz simultaneously in pulse-and-echo and pitch-and-catch modes. The PSC measurement is provided by attenuation, while the density measurement is calculated by impedance and sound velocity. A thermocouple is attached to one of the waveguides for automatic temperature correction of the measurements. This system was one of four evaluated for in-line measurement of slurry at Oak Ridge National Laboratory in 1998. The results indicate that the measurements are in good agreement with a Coriolis meter and that the system can be used to monitor PSC up to 40 wt.%. However, the system is greatly affected by entrained air bubbles within the solid flow during Puisair mixing. A different mixing mechanism will solve this …

The National Spherical Torus Experiment (NSTX) started plasma operations in February 1999, and promptly achieved high current, inner wall limited, double null, and single null plasma discharges, initial Coaxial Helicity Injection, and High Harmonic Fast Wave results. NSTX is designed to study the physics of Spherical Tori (ST) in a device that can produce non-inductively sustained high-{beta} discharges in the 1 MA regime and to explore approaches toward a small, economical high power density ST reactor core. As expected, discharge reproducibility and performance were strongly affected by wall conditions. In this paper, the authors describe the internal geometry, and initial plasma discharge, impurity control, wall conditioning, erosion, and deposition results.

Electroweak symmetry breaking may be naturally induced by the observed quark and gauge fields in extra dimensions without a fundamental Higgs field. The authors show that a composite Higgs doublet can arise as a bound state of (t,b){sub L} and a linear combination of the Kaluza-Klein states of t{sub R}, due to QCD in extra dimensions. The top quark mass depends on the number of active t{sub R} Kaluza-Klein modes, and is consistent with the experimental value.

The ability to withstand disruptions makes carbon-based materials attractive for use as plasma-facing components in divertors. However, such materials suffer high erosion rates during attached plasma operation which, in high power long pulse machines, would give short component lifetimes and high tritium inventories. The authors present results from recent experiments in DIII-D, in which the Divertor Materials Evaluation System (DiMES) was used to examine erosion and deposition during short exposures to well defined plasma conditions. These studies show that during operation with detached plasmas, produced by gas injection, net erosion is suppressed everywhere in the divertor. Net deposition of carbon with deuterium was observed at the inner and outer strikepoints and in the private-flux region between strikepoints. For these low temperature plasmas (T{sub e} < 2eV), physical sputtering is eliminated. These results show that with detached plasmas, the location of carbon net erosion and the carbon impurity source, probably lies outside the divertor. Physical or chemical sputtering by charge-exchange neutrals or ions in the main plasma chamber is a probable source of carbon under these plasma conditions.

The discovery of the W and Z gauge bosons at the Sp{bar p}S in 1983 marked the beginning of direct electroweak measurements at a hadron machine. These measurements vindicated the tree level predictions of the Standard Model. The new generation of hadron collider machines now have data of such precision that the electroweak measurements are probing the quantum corrections to the Standard Model. The importance of these quantum corrections was recognized in the award of the 1999 Nobel Price. These corrections are being tested by a wide variety of measurements ranging from atomic parity violation in cesium to precision measurements at the Z pole and above in e{sup +}e{sup {minus}} collisions. In this article, the latest experimental electroweak data from hadron machines is reviewed. The author has taken a broad definition of a hadron machine to include the results from NuTeV ({nu}N collisions) and HERA (ep collisions) as well as the results of the Tevatron (p{bar p} collisions). This is not an exhaustive survey of all results, but a summary of the new results of the past year and in particular those results which have an influence on the indirect determination of the Higgs mass. This article will cover the …

A literature survey and technical evaluation was carried out of past and present battery technologies with the goal of identifying appropriate candidates for use in geothermal borehole and, to a lesser extent, oil/gas boreholes. The various constraints that are posed by such an environment are discussed. The promise as well as the limitations of various candidate technologies are presented. Data for limited testing of a number of candidate systems are presented and the areas for additional future work are detailed. The use of low-temperature molten salts shows the most promise for such applications and includes those that are liquid at room temperature. The greatest challenges are to develop an appropriate electrochemical couple that is kinetically stable with the most promising electrolytes--both organic as well as inorganic--over the wide operating window that spans both borehole environments.

This paper summarizes results of recent searches for new phenomena with the CDF and D0 detectors at the Fermilab Tevatron. All results shown correspond to analysis from the past Run I data corresponding to a total integrated luminosity of {approximately} 100 pb{sup {minus}1} per experiment. In particular, the authors show new results from stop quark searches, neutral supersymmetric Higgs boson searches, a reinterpretation of the CDF second and third generation leptoquark searches in terms of leptoquark resonant production through technicolor interactions and, finally, they report a new D0 search for large extra space dimensions from high mass Drell-Yan dielectron and diphoton events.

We present here the results of polarized magneto-photoluminescence measurements on a high mobility single-heterojunction. The presence of a doublet structure over a large magnetic field range (2>v>l/6) is interpreted as possible evidence for the existence of a magneto-roton minima of the charged density waves. This is understood as an indication of strong electronic correlation even in the case of the IQHE limit.

The authors apply synchrotron x-ray analysis techniques to probe the surface structure of GaN films during synthesis by metal-organic chemical vapor deposition (MOCVD). Their approach is to observe the evolution of surface structure and morphology in real time using grazing incidence x-ray scattering (GIXS). This technique combines the ability of x-rays to penetrate the chemical vapor deposition environment for in situ measurements, with the sensitivity of GIXS to atomic scale structure. In this paper they present examples from some of their studies of growth modes and surface evolution as a function of process conditions that illustrate the capabilities of synchrotron x-ray analysis during MOCVD growth. They focus on studies of the homoepitaxial growth mode, island coarsening dynamics, and effects of impurities.

The magnetophotoluminescence (MPL) behavior of a GaAs/Al_0.3Ga_0.7As single heterojunction has been investigated to 60T. We observed negatively charged singlet and triplet exciton states that are formed at high magnetic fields beyond the {nu}=l quantum Hall state. The variation of the charged exciton binding energies are in good agreement with theoretical predictions. The MPL transition intensities for these states showed intensity variations (maxima and minima) at the {nu}=l/3 and 1/5 fractional quantum Hall (FQH) state as a consequence of a large reduction of electron-hole screening at these filling factors.

Using an optimized thermal-spray process, coherent, dense deposits of pyrite (FeS{sub 2}) with good adhesion were formed on 304 stainless steel substrates (current collectors). After leaching with CS{sub 2} to remove residual free sulfur, these served as cathodes in Li(Si)/FeS{sub 2} thermal cells. The cells were tested over a temperature range of 450 C to 550 C under baseline loads of 125 and 250 mA/cm{sup 2}, to simulate conditions found in a thermal battery. Cells built with such cathodes outperformed standard cells made with pressed-powder parts. They showed lower interracial resistance and polarization throughout discharge, with higher capacities per mass of pyrite. Post-treatment of the cathodes with Li{sub 2}O coatings at levels of >7% by weight of the pyrite was found to eliminate the voltage transient normally observed for these materials. Results equivalent to those of standard lithiated catholytes were obtained in this manner. The use of plasma-sprayed cathodes allows the use of much thinner cells for thermal batteries since only enough material needs to be deposited as the capacity requirements of a given application demand.