Abstract: "The niobium-oxygen equilibrium has been determined by metallographic examination of arc-cast alloys made of electron-gun-refined niobium metal and special purity niobium pentoxide. Two intermediate oxides, NbO and NbO2, melt without decomposition at 1945 C and 1915 C, respectively. Eutectic reactions exist between niobium and NbO and 1915 C and between NbO and NbO2 at 1810 C. Experimental supports a peritectic reaction between NbO2 and Nb2O5 1510 C. The maximum solid solubility of oxygen in niobium metal is 0.72 weight per cent."

Report discussing a studies regarding "imaging qualities and the thermal neutron and gamma-ray sensitivities of several neutron imaging detectors".

Abstract: "The corrosion rate in 680 F water of the uranium-50 w/o zirconium binary alloy was found to be -0.20 mg/(cm2)(hr), and that of the uranium-40 w/o zirconium binary alloy was -0.34 mg/(cm2)(hr). Both alloys correlated uniformly, with no evidence of discontinuous failure. Normal variations in interstitial content in either alloy had no significant effect on corrosion behavior. Tantalum additions, in the range of 0.2 to 5 w/o, improved the corrosion rate of the uranium-50 w/o zirconium base, with a minimum rate of -0.06 mg/(cm2)(hr) for the 5 w/o tantalum alloy. The 5 w/o tantalum addition to the uranium-40 w/o zirconium alloy. The 5 w/o tantalum addition to the uranium-40 w/o zirconium alloy decreased the corrosion rate of the base to -0.11 mg/(cm2)(hr) in the [...] condition only. In either conditions, the 5 w/o tantalum alloy failed discontinuously. All other additions to both bases either had no effect or decreased corrosion resistance. These included aluminum, chromium, iron, molybdenum, nickel, platinum, tin, titanium, tungsten, and vanadium additions."

Technical report and preliminary design calculations describing a type of liquid fuel reactor adaptable for production or breeding on a U-233 cycle based on data at Brookhaven National Laboratory. Describes design calculations for generating significant amounts of power and neutrons by use of uranium-bismuth solutions with fused salts in the reactor system.

Abstract: The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the Tonopah National Topographic Map NJll-5 is presented in Volume I and II of this report. The airborne data gathered is reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveyed map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also.

This report presents the results of a reconnaissance geochemical survey of the Pratt quadrangle, Kansas. Field laboratory data is provided for 611 groundwater and 662 stream sediment samples.

Report presenting calculations of the dynamic lateral stability characteristics of a mock-up configuration of the Douglas X-3. The oscillations were found to be stable for all calculations investigated but would not meet the Air Force damping requirements for the majority of the conditions. The use of an autopilot was found to greatly improve oscillation damping.

Memorandum presenting a two-dimensional wind-tunnel investigation of the effects of maximum-thickness location on fluctuating pressures and normal-force coefficients on 9-percent-thick airfoils, which indicated that for normal-force coefficients up to 0.6, the section variables had little effect on the pressure pulsations and root-mean-square normal-force-coefficient fluctuations. Results regarding pressure fluctuations and normal-force-coefficient fluctuations are provided.

Data listings from the area surveyed in a report on the Hot Springs containing averaged record data listings.

Data listings from the area surveyed in a report on the Hot Springs including single record reduced listings.

The angle errors of a rotary table can be accurately measured by stepping off the angles with an optical caliper and computing table error from (1) the error readings at each angle measured and (2) the cumulative caliper error that will be evident when the circle is closed at 360', eliminating the necessity of adjusting the caliper to the exact setting.

It is recommended that self-concentration of Purex wastes should not be started until much more complete knowledge is obtained of the conditions and reactions in these wastes. The presently planned tests in the Semi-Works will be a practical demonstration of the problems but will be of little value on the initial Purex wastes as these tests are being run almost concurrent with the filling of the first Purex storage tank.

Quarterly progress report on metallurgy research operations at Hanford Atomic Products Operation in Richland, Washington.

Report concerning the behavior of atoms dislodged from their positions in solid constituents by neutrons during the transition from high energy to thermal energy.

Report discussing variations in comparative tests of portland cements that could lead to the rejection of a material fully conforming to specification requirements, or the acceptance of a material with undesirable chemical or physical properties. Many of the causes for variation in chemical analyses and physical test results are listed in this discussion, and remedies for some of the more frequently encountered deficiencies in apparatus and methods are suggested.

Report evaluating the technical and economic feasibility of four zirconium fuel processes: the present STR process, the modified Zirflex process, the barium fluozirconate process, and the sodium formate process.

Results are presented showing the effects of gap, elevator, nose shape, balance, cut-out, and tabs on the aerodynamic characteristics of a horizontal tail surface tested in the NACA full-scale tunnel.

An investigation to determine and correlate the experimental surface heat-transfer coefficients of finned cylinders with different air-stream cooling arrangements was conducted at the Langley Memorial Aeronautical Laboratory from 1932 to 1938. The investigation covered the determination of the effect of fin width, fin space, fin thickness, and cylinder diameter on the heat transfer. Wind-tunnel tests were made in the free air stream with and without baffles and also with various devices for creating a turbulent air stream. Tests were also made with blower.

Models of two types of high-speed surface craft were tested in Langley tank no. 1 to obtain rough-water data for an evaluation by the David Taylor .Model Basin of the relative merits of the designs. Time-history records were obtained of trim, rise, and normal acceleration at two points in the hulls for various speeds and two sizes of waves.

This report presents the results of measurements of flow in the boundary layer of a 1/40-scale model of the U. S. Airship "Akron" (ZRS-4) made with the object of determining the boundary-layer thickness, the point of transition from laminar to the turbulent flow, and the velocity distribution in the boundary layer.

The take-off stability characteristics of a Consolidated Vultee Aircraft Corporation Skate 7 seaplane were determined in the Langley tank no. 2. Trim limits of stability, trim tracks, and elevator limits of stability are presented.

The temperature characteristics associated with the handling of self-boiling radioactive wastes from the separations extraction processes in the Chemical Processing Department have necessitated several heat transfer studies. Earlier studies 1,2,3 defined the feasibility of self-concentration in existing waste storage facilities by determining the rate of heat generation from the decay of stored fission products and by defining the rate of heat loss from existing storage tanks to the surrounding soil.

Presented herein is a philosophy for designing wideband multistage transistor amplifiers. The amplifier is visualized as an integral unit, the interstage networks constituting the elements of the amplifier unit. By designing the amplifier as a unit and adjusting the overall response (gain and bandwidth) with the interstage time constants, an increase in gain-bandwidth product is realized over the iteratively designed amplifiers. The resulting increase in gain-bandwidth product results from absence of the bandwidth shrinkage factor for multistage amplifiers. Formulas are derived for both a two- and three-transistor integrally designed wideband amplifier, in which shunt peaking networks are used for coupling. Experimental amplifiers were constructed following these formulas, and the observed performance agreed quite well with the calculations.

The Chapman-Jouguet pressure and equation of state of the high explosives PBX 9404 and LX04-01 have been experimentally derived. To assure a strictly one-dimensional geometry, spheres of high explosives were used. Experimental measurements of the radius-time history of material accelerated by the explosive gases were used in conjunction with finite difference calculations of the hydrodynamic equations to obtain some previous inaccessible data on high explosives.