A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO provided information on states' social service contracting, focusing on: (1) the extent to which state government employees have moved to positions at social service contractors and the impact such movement has had on the management of publicly provided social services; (2) determining the relative success in winning contracts by contractors who hired state employees and contractors who did not; (3) state ethics laws, policies, and enforcement approaches that address the employment of former state employees and other related issues; and (4) state practices for holding contractors accountable for achieving program results through contracted services."

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO reviewed the Department of Agriculture's implementation of legislative reforms to the Market Access Program (MAP) and their impact on program participation."

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a legislative requirement, GAO provided information on Medicare beneficiaries' access to home oxygen equipment, focusing on: (1) changes in access to home oxygen for Medicare patients since the payment reduction mandated by the Balanced Budget Act (BBA) of 1997 took effect; and (2) actions taken by the Health Care Financing Administration (HCFA) to fulfill the BBA requirements and respond to GAO's November 1997 recommendations."

We have discussed two aspects of creating high integrity software that greatly benefit from the availability of transformation technology, which in this case is manifest by the requirement for a sophisticated backtracking parser. First, because of the potential for correctly manipulating programs via small changes, an automated non-procedural transformation system can be a valuable tool for constructing high assurance software. Second, modeling the processing of translating data into information as a, perhaps, context-dependent grammar leads to an efficient, compact implementation. From a practical perspective, the transformation process should begin in the domain language in which a problem is initially expressed. Thus in order for a transformation system to be practical it must be flexible with respect to domain-specific languages. We have argued that transformation applied to specification results in a highly reliable system. We also attempted to briefly demonstrate that transformation technology applied to the runtime environment will result in a safe and secure system. We thus believe that the sophisticated multi-lookahead backtracking parsing technology is central to the task of being in a position to demonstrate the existence of HIS.

The local strain and texture in Al interconnect wires have been investigated using white and monochromatic x-ray microbeams on the MHATTCAT undulator beam line at the Advanced Photon Source. Intergrain and intragrain orientations were obtained with ~0.01 degree sensitivity using white beam measurements on wide Al pads (~100 Mu-m) and thin (2 Mu-m) Al wires. Orientation changes of up to 1 degree were found within individual grains of the (111) textured Al interconnects. Deviatoric strain measurements indicate small intragranular strain variations, but intergranular strain variations were found to be quite large.

It is well known that the work function of metals decreases when they are placed in a nonpolar liquid. A similar decrease occurs when the metal is placed into contact with a semiconductor forming a Schottky barrier. We report on a new method for detecting photons using the stress caused by photo-electrons emitted from a metal film surface in contact with a semiconductor microstructure. The photoelectrons diffuse into the microstructure and produce an electronic stress. The photon detection results from the measurement of the photo-induced bending of the microstructure. Internal photoemission has been used in the past to detect photons, however, in those cases the detection was accomplished by measuring the current due to photoelectrons and not due to electronic stress. Small changes in position (displacement) of microstructures are routinely measured in atomic force microscopy (AFM) where atomic imaging of surfaces relies on the measurement of small changes (< l0{sup -9} m) in the bending of microcantilevers. In the present work we studied the photon response of Si microcantilevers coated with a thin film of Pt. The Si microcantilevers were 500 nm thick and had a 30 nm layer of Pt. Photons with sufficient energies produce electrons from the platinum-silicon …

The longitudinal microwave instability is present in the SLC damping rings during routine operations. Experimental studies of the instability at nominal conditions have been reported previously. To complement those studies and better understand the properties of the instability a series of dedicated experiments were performed under a broad range of operating parameters. These experiments included spectral measurements of BPM signals as well as time domain diagnostics using a custom detecting circuit. This paper describes the techniques, the results and discusses possible interpretations of these measurements.

None

The following ceramics were prepared for this study: the baseline ceramic, the baseline ceramic plus process impurities, a zirconolite-rich composition, a brannerite-rich composition, a composition designed to have {approx} 10% perovskite in addition to the normal baseline phases, and an {approx} 10% phosphate-doped batch. These samples were prepared by oxide (via wet or dry milling) and alkoxide-routes. The milling method has a direct effect on the samples. Incomplete milling leads to inhomogeneity in the microstructure. The main effect of incomplete milling is that unreacted actinide oxides remain in the microstructure, usually surrounded by brannerite. The phase composition also alters due to the actinide being tied up in the unreacted oxide, e.g., the pyrochlore has less actinide and additional phases, such as zirconolite may form. The approach to equilibrium is determined by a number of factors--the efficiency of the milling, the sintering time, the sintering temperature and the batch composition. The latter is very important, e.g., the zirconolite-rich batch has a slower approach to equilibrium than the baseline ceramic requiring higher sintering temperatures or longer sintering times. The addition of process impurities dramatically alters the approach to equilibrium. The additives produce a silicate liquid phase (at the sintering temperatures), which aids …

Recently there has been an increasing demand to perform real-time in-situ chemical detection of hazardous materials, contraband chemicals, and explosive chemicals. Currently, real-time chemical detection requires rather large analytical instrumentation that are expensive and complicated to use. The advent of inexpensive mass produced MEMS (micro-electromechanical systems) devices opened-up new possibilities for chemical detection. For example, microcantilevers were found to respond to chemical stimuli by undergoing changes in their bending and resonance frequency even when a small number of molecules adsorb on their surface. In our present studies, we extended this concept by studying changes in both the adsorption-induced stress and photo-induced stress as target chemicals adsorb on the surface of microcantilevers. For example, microcantilevers that have adsorbed molecules will undergo photo-induced bending that depends on the number of absorbed molecules on the surface. However, microcantilevers that have undergone photo-induced bending will adsorb molecules on their surfaces in a distinctly different way. Depending on the photon wavelength and microcantilever material, the microcantilever can be made to bend by expanding or contracting the irradiated surface. This is important in cases where the photo-induced stresses can be used to counter any adsorption-induced stresses and increase the dynamic range. Coating the surface of the …

This report briefly explains how the annual budget resolution sets forth total spending and revenue levels, which are then allocated to the appropriate House and Senate committees, which in turn help Congress determine how best to enforce spending once a budget resolution is adopted.

Mission critical applications of MEMS devices require knowledge of the distribution in their material properties and long-term reliability of the small-scale structures. This project reports on a new testing program at Sandia to quantify the strength distribution using samples that reflect the dimensions of critical MEMS components. The strength of polysilicon fabricated with Sandia's SUMMiT 4-layer process was successfully measured using samples with gage sections 2.5 {micro}m thick by 1.7 {micro}m wide and lengths of 15 and 25 {micro}m. These tensile specimens have a freely moving pivot on one end that anchors the sample to the silicon die and prevents off axis loading during testing. Each sample is loaded in uniaxial tension by pulling laterally with a flat tipped diamond in a computer-controlled Nanoindenter. The stress-strain curve is calculated using the specimen cross section and gage length dimensions verified by measuring against a standard in the SEM. The first 48 samples had a means strength of 2.24 {+-} 0.35 GPa. Fracture strength measurements grouped into three strength levels, which matched three failure modes observed in post mortem examinations. The seven samples in the highest strength group failed in the gage section (strength of 2.77 {+-} 0.04 GPa), the moderate strength …

The Anticipatory System (AS) formalism developed by Robert Rosen provides some insight into the problem of embedding intelligent behavior in machines. AS emulates the anticipatory behavior of biological systems. AS bases its behavior on its expectations about the near future and those expectations are modified as the system gains experience. The expectation is based on an internal model that is drawn from an appeal to physical reality. To be adaptive, the model must be able to update itself. To be practical, the model must run faster than real-time. The need for a physical model and the requirement that the model execute at extreme speeds, has held back the application of AS to practical problems. Two recent advances make it possible to consider the use of AS for practical intelligent sensors. First, advances in transducer technology make it possible to obtain previously unavailable data from which a model can be derived. For example, acoustic emissions (AE) can be fed into a Bayesian system identifier that enables the separation of a weak characterizing signal, such as the signature of pump cavitation precursors, from a strong masking signal, such as a pump vibration feature. The second advance is the development of extremely fast, …

High Temperature X-ray Diffraction (HTXRD) is a very powerful tool for studies of reaction kinetics, phase transformations, and lattice thermal expansion of advanced materials. Accurate temperature measurement is a critical part of the technique. Traditionally, thermocouples, thermistors, and optical pyrometers have been used for temperature control and measurement and temperature could only be measured at a single point. Infrared imaging was utilized in this study to characterize the thermal gradients resulting from various sample and furnace configurations in a commercial strip heater furnace. Furnace configurations include a metallic strip heater, with and without a secondary surround heater, or a surround heater alone. Sample configurations include low and high thermal conductivity powders and solids. The IR imaging results have been used to calibrate sample temperatures in the HTXRD furnace.

Scenario development has two primary purposes in the design and documentation of post-closure performance assessments in a regulatory setting. First, scenario development ensures a sufficiently comprehensive consideration of the possible future states of the system. Second, scenario development identifies the important scenarios that must be considered in quantitative analyses of the total system performance assessment (TSPA). Section 2.0 of this report describes the scenario development process. Steps in the process are described in Section 2.1, and terms introduced in this section are defined in Section 2.2. The electronic database used to document the process is described in Section 3, and Section 4 provides a summary of the current status of the YMP scenario development work. Section 5 contains acknowledgments, and Section 6 contains a list of the references cited.

We present experimented results directed at understanding the growth and structure of metallic barrier layer and interconnect films. Numerical simulation results associated with this experimental work are presented in an accompanying paper in these proceedings. Here, thin films of Al, Ti, Cu and Ta have been grown by magnetron sputtering onto oxidized Si substrates. Using a specially-constructed substrate holder, the orientation of the substrate with respect to the growth direction was varied from horizontal to vertical. Films were grown at both low and high argon pressure; in the case of Ta, the cathode power was varied as well. The film structure and in particular the surface roughness was measured by X-ray reflectance and also by atomic force microscopy. We find that the surface roughness increases markedly with orientation angle in the case of Ta and Cu films, and in Ti films grown at high argon pressure. At low pressure, however, the Ti film surface roughness remains constant for all substrate orientations. No variation in roughness with either orientation angle or argon pressure was observed in the Al films. These results suggest that, under certain circumstances, shadowing effects and/or grain orientation (i.e., texture) competition during growth can give rise to lower …

None

In order to develop an alternative buffer layer architecture using the sol-gel process to produce YBCO (YBa2Cu307+) coated conductors, Yb203 has been chosen as the candidate material. Buffer layers of fi03 were epitaxkdly grown on biaxially textured-Ni (100) substrates by the sol gel process for the first time. The ~03 precursor solution was prepared from an alkoxide sol-gel route in 2-xnetho~ethanol and was deposited on textured-Ni (100) substrates by either spin coating or dip coating methods. The amorphous film was then processed at 1160oC under flowing (96%)MH2(4%) gas mixture for one hour. The fi03 iihn exhibited a strong c-axis orientation on the Ni (100) substrates. The phi and omega scans indicated good in plane and out of plane orientations. The X-ray (222) pde figure showed a cube-on-cube epitaxy. High current YBCO films were grown on the Y&03 sol-gel buffered-Ni substrates.

Application of Executive Order 12898 to risk assessment of highway or rail transport of hazardous materials has proven difficult; the location and conditions affecting the propagation of a plume of hazardous material released in a potential accident are unknown, in general. Therefore, analyses have only been possible in geographically broad or approximate manner. The advent of geographic information systems and development of software enhancements at Sandia National Laboratories have made kilometer-by-kilometer analysis of populations tallied by U.S. Census Blocks along entire routes practicable. Tabulations of total, or racially/ethnically distinct, populations close to a route, its alternatives, or the broader surrounding area, can then be compared and differences evaluated statistically. This paper presents methods of comparing populations and their racial/ethnic compositions using simple tabulations, histograms and Chi Squared tests for statistical significance of differences found. Two examples of these methods are presented: comparison of two routes and comparison of a route with its surroundings.

First-principles total energies of periodic vicinals are used to estimate barriers for Pt-adatom diffusion along straight and kinked steps on Pt(111), and around a corner where straight steps intersect. In all cases studied, hopping diffusion has a lower barrier than concerted substitution. In conflict with simulations of dendritic Pt island formation on Pt(111), hopping from a corner site to a step whose riser is a (111)-micro facet is predicted to be more facile than to one whose riser is a (100).

Epitaxial thin films of the Tl cuprate superconductors Tl{sub 2}Ba{sub 2}CaCu{sub 2}O{sub 8}, Tl{sub 2}Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10}, and TL{sub 0.78}Bi{sub 0.22}Ba{sub 0.4}Sr{sub 1.6}Ca{sub 2}Cu{sub 3}O{sub 9{minus}{delta}} are studied with x-ray photoemission spectroscopy. These data, together with previous measurements in this lab of Tl{sub 2}Ba{sub 2}CuO{sub 6+{delta}} and TlBa{sub 2}CaCu{sub 2}O{sub 7{minus}{delta}}, comprise a comprehensive data set for a comparative study of Tl cuprates with a range of chemical and electronic properties. In the Cu 2p spectra, a larger energy separation between the satellite and main peaks (E{sub s}-E{sub m}) and a lower intensity ratio (I{sub s}/I{sub m}) are found to correlate with higher values of T{sub c}. Analysis of these spectra within a simple configuration interaction model suggests that higher values of T{sub c} are related to low values of the O 2p {r_arrow} Cu 3d charge transfer energy. In the O 1s region, a smaller bond length between Ba and Cu-O planar oxygen is found to correlate with a lower binding energy for the signal associated with Cu-O bonding, most likely resulting from the increased polarization screening by Ba{sup 2+} ions. For samples near optimum doping, maximum T{sub c} is observed to occur when the Tl 4f{sub …

We have designed a new class of cyclic siloxane compounds that behave as sol-gel systems when ring open polymerized using a hydroxide base. These monomers polymerize through chain growth polymerization. unlike conventional alkoxysilane sol-gel precursors, to form sol-gel polymers. They do not require solvent or water for polymerization, show no visible shrinkage or cracking during polymerization and are thermally stable. We have successfully utilized these materials in encapsulation of microelectronics. Current efforts are focused toward expanding this family of ROP monomers and optimization of their mechanical properties.

Surface pressure data from the National Renewable Energy Laboratory's ''Unsteady Aerodynamics Experiment'' were analyzed to characterize the impact of three-dimensionality, unsteadiness, and flow separation effects observed to occur on downwind horizontal axis wind turbines (HAWT). Surface pressure and strain gage data were collected from two rectangular planform blades with S809 airfoil cross-sections, one flat and one twisted. Both blades were characterized by the maximum leading edge suction pressure and by the azimuth, velocity, and yaw at which it occurred. The occurrence of dynamic stall at all but the inboard station (30% span) shows good quantitative agreement with the theoretical limits on inflow velocity and yaw that should yield dynamic stall events. A full three-dimensional characterization of the surface pressure topographies combined with flow visualization data from surface mounted tufts offer key insights into the three-dimensional processes involved in the unsteady separation process and may help to explain the discrepancies observed with force measurements at 30% span. The results suggest that quasi-static separation and dynamic stall analysis methods relying on purely two-dimensional flow characterizations may not be capable of simulating the complex three-dimensional flows observed with these data.

Melt-quenched NdFeB is an important modern permanent magnet material. However there still remains doubt as to the magnetization reversal mechanism which controls coercivity in material prepared by this processing route. To investigate this problem a new technique based on measurements of reversible magnetization along recoil curves has been used. The technique identifies the presence of free domain walls during magnetic reversal. For this study samples of isotropic (MQI), hot pressed (MQII) and die upset (MQIII) melt-quenched NdFeB were examined. The results indicate that in MQI free domain walls are not present during reversal and the reversal mechanism is most likely incoherent rotation of some form. Free domain walls are also not present during reversal in the majority of grains of MQII, even though initial magnetization measurements indicate that the grain size is large enough to support them. In MQIII free domain walls are present during reversal. These results are attributed to the reduced domain wall nucleation field in MQIII compared with MQII and the increased dipolar interactions in MQIII.