Modeling fluid, vapor, and air injection and extraction from wells poses a number of problems. The length scale of well bores is centimeters, the region of high pressure gradient may be tens of meters and the reservoir may be tens of kilometers. Furthermore, accurate representation of the path of a deviated well can be difficult. Incorporating the physics of injection and extraction can be made easier and more accurate with automated grid generation tools that incorporate wells as part of a background mesh that represents the reservoir. GEOMESH is a modeling tool developed for automating finite element grid generation. This tool maintains the geometric integrity of the geologic framework and produces optimal (Delaunay) tetrahedral grids. GEOMESH creates a 3D well as hexagonal segments formed along the path of the well. This well structure is tetrahedralized into a Delaunay mesh and then embedded into a background mesh. The well structure can be radially or vertically refined and each well layer is assigned a material property or can take on the material properties of the surrounding stratigraphy. The resulting embedded well can then be used by unstructured finite element models for gas and fluid flow in the vicinity of wells or tunnels. …

The 100-D Ponds facility is regulated under the Resource Conservation and Recovery Act of 1976. The pH of groundwater in a downgradient well is statistically different than local background, triggering an assessment of groundwater contamination under 40 CFR 265.93. Results of a similar assessment, conducted in 1993, show that the elevated pH is caused by the presence of alkaline ash sediments beneath the ponds, which are not part of the RCRA unit. The 100-D Ponds should remain in indicator evaluation monitoring.

In 1993, a Limited Field Investigation (LFI) was conducted for the 100-FR-3 Operable Unit which identified trichloroethylene (TCE) as a contaminant of potential concern (COPC) (DOE-RL 1994). In groundwater samples collected for the LFI, TCE was detected in well 199-177-1 at a concentration exceeding the U.S. Environmental Protection Agency (EPA) maximum contaminant level (5 {mu}g/L) and Washington State groundwater criteria (3 {mu}g/L). With the concurrence of the EPA and the Washington State Department of Ecology (Ecology), a supplemental LFI was conducted to determine the extent and potential source of TCE groundwater contamination associated with the 100-FR-3 Operable Unit. This report summarizes the activities and results of the groundwater/soil gas supplemental LFI for the 100-FR-3 Operable Unit. The primary objective of this investigation was to assess the lateral distribution of TCE in shallow (3 to 5 ft below the water table) groundwater associated with the 100-FR-3 Operable Unit. The second objective was to assess soil gas (3 to 5 concentrations in the study area in an attempt to identify potential sources of TCE and develop a correlation between soil gas and groundwater concentrations). Finally, the third objective of the investigation was to refine the site conceptual model.

This report evaluates the closure activities at the 105-DR Large Sodium Fire Facility. The evaluation compares these activities to the regulatory requirements and closure plan requirements. The report concludes that the areas identified in the closure plan can be clean closed. This report summarizes and evaluates the closure activities performed in support of partial closure of the 105-DR Large Sodium Fire Facility (LSFF). This evaluation will be used in assessing the condition of the 105-DR LSFF for the purpose of meeting the partial clean closure conditions described in the 105-DR Large Sodium Fire Facility Closure Plan (DOE-RL 1995). Based on the evaluation of the decontamination activities, sampling activities, and sample data, it is has been determined that the partial clean closure conditions for the 105-DR LSFF have been met.

This report evaluates the closure activities at the 105-DR Large Sodium Fire Facility. The closure activities discussed include: the closure activities for the structures, equipment, soil, and gravel scrubber; decontamination methods; materials made available for recycling or reuse; and waste management. The evaluation compares these activities to the regulatory requirements and closure plan requirements. The report concludes that the areas identified in the closure plan can be clean closed.

The purpose of this document is to outline the K Basins 30 ton crane qualification strategy for use in the Spent Nuclear Fuel Project fuel relocation campaign.

The 200-BP-5 Operable Unit was established in response to recommendations presented in the 200 East Groundwater Aggregate Area Management Study Report (AAMSR) (DOE-RL 1993a). Recognizing different approaches to remediation, the groundwater AAMSR recommended separating groundwater from source and vadose zone operable units and subdividing 200 East Area groundwater into two operable units. The division between the 200-BP-5 and 200-PO-1 Operable Units was based principally on source operable unit boundaries and distribution of groundwater plumes derived from either B Plant or Plutonium/Uranium Extraction (PUREX) Plant liquid waste disposal sites.

This report summarizes the results of wildlife surveys performed at Rocky Flats Environmental Technology Site (RFETS) from January through December of 1995 as compared with results from previous years. These surveys were performed as part of a long-term ecological monitoring program conducted under the Natural Resource Protection and Compliance Program (NRPCP). This program is essential in identifying and describing fluctuations of wildlife populations, wildlife habitat use, and changes in species using RFETS. The NRPCP provides support to the Department of Energy (DOE) in its role as Natural Resource Trustee, and provides data essential to accomplishing the goal of preserving the unique ecological values of RFETS in keeping with the Rocky Flats Vision presented in the Rocky Flats Cleanup Agreement Public Comment Draft. Wildlife population densities vary due to natural pressures and human influences, and only long-term monitoring can verify which factors influencing wildlife populations are the consequence of natural fluctuations, and which are due to human influences. The wildlife monitoring described in this report provides qualitative data that give an indication of the ecological health of RFETS. Monitoring numbers, habitat affinities, and apparent health of the wildlife populations makes it possible to evaluate the overall ecological health of the site. …

Final congressional approval was given to H.R. 2854, the Federal Agricultural Improvement and Reform (FAIR) Act, otherwise known as the "1996 farm bill," on March 28, 1996. President Clinton signed the bill into law on April 4, 1996 (P.L. 104-127). In tabular format, this CRS report lays out in descriptive, rather than legislative language, the major provisions of the new farm bill in contrast to preceding law.

This report was submitted to meet the requirements of Hanford Federal Facility Agreement and Consent Order milestone M-26-OIF. This milestone requires the preparation of an annual report that covers characterization, treatment, storage, minimization, and other aspects of land disposal-restricted mixed waste management at the Hanford Site.

This document contains the acceptance test procedure for the mechanical equipment and instrumentation installed per the L-070 Project. The specific system to be tested are the pump controls for the 3906 Lift Station and 350-A Lift Station. In addition, verification that signals are being received by the 300 Area Treated Effluent Disposal Facility control system, is also performed.

The purpose of this Acceptance Test Report is to provide documentation for the acceptance testing of the rotary mode core sample trucks 3 and 4, designated as HO-68K-4600 and HO-68K-4647, respectively. This report conforms to the guidelines established in WHC-IP-1026, ``Engineering Practice Guidelines,`` Appendix M, ``Acceptance Test Procedures and Reports.`` Rotary mode core sample trucks 3 and 4 were based upon the design of the second core sample truck (HO-68K-4345) which was constructed to implement rotary mode sampling of the waste tanks at Hanford. Successful completion of acceptance testing on June 30, 1995 verified that all design requirements were met. This report is divided into four sections, beginning with general information. Acceptance testing was performed on trucks 3 and 4 during the months of March through June, 1995. All testing was performed at the ``Rock Slinger`` test site in the 200 West area. The sequence of testing was determined by equipment availability, and the initial revision of the Acceptance Test Procedure (ATP) was used for both trucks. Testing was directed by ICF-KH, with the support of WHC Characterization Equipment Engineering and Characterization Project Operations. Testing was completed per the ATP without discrepancies or deviations, except as noted.

The Acceptance Test Procedure for the 241-AN-107 Caustic Addition Mixer Pump Data logger, WHC-SD-WM-ATP-149, was started on September 25, 1995, and completed November 13, 1995. K.G. Carothers of Tank Waste Remediation Engineering requested the test procedure and ICF Kaiser Control Systems Engineering group wrote the test procedure and executed it at the 305 building in 300 area and at the 241-AN Tank Farm in 200 East area. The purpose of this report is to document that the Caustic addition Mixer Pump Data logger, functioned as intended as installed at 241-AN-107 tank farm.

The Spent Nuclear Fuel (SNF) Project Engineering Support group cold-tested the Eductor System a 15 horsepower multi-stage centrifugal pump manufactured by the Grunfos Corporation with the housing manufactured and sold with the pump by the Tri-Nuclear Corporation and a 3-inch diameter water jet eductor manufactured by the Fox Valve Corporation. The Eductor System was tested to gather and document information to optimize sludge retrieval operations for use in the 105 K Basins. The cold-testing took place during February 12 through February 29, 1996 in the 305 Cold Test Facility basin located in the 300 area. The pump, utilized in conjunction with the eductor, makes up the core of the Eductor System. The pumping unit consists of a 15 hp stainless steel multi-stage centrifugal Grunfos pump which is seated in a stainless steel fabricated housing. Two baskets or filter elements make up part of the housing on the suction side of the pump. The pump can be used independent of the housing but the housing has two identified purposes. The first use is to stabilize the centrifugal pump and give the pneumatic valves and pump discharge piping a solid platform so the Eductor System can be more easily mobilized within the …

Adaptive sampling programs provide real opportunities to save considerable time and money when characterizing hazardous waste sites. This Strategic Environmental Research and Development Program (SERDP) project demonstrated two decision-support technologies, SitePlanner{trademark} and Plume{trademark}, that can facilitate the design and deployment of an adaptive sampling program. A demonstration took place at Joliet Army Ammunition Plant (JAAP), and was unique in that it was tightly coupled with ongoing Army characterization work at the facility, with close scrutiny by both state and federal regulators. The demonstration was conducted in partnership with the Army Environmental Center`s (AEC) Installation Restoration Program and AEC`s Technology Development Program. AEC supported researchers from Tufts University who demonstrated innovative field analytical techniques for the analysis of TNT and DNT. SitePlanner{trademark} is an object-oriented database specifically designed for site characterization that provides an effective way to compile, integrate, manage and display site characterization data as it is being generated. Plume{trademark} uses a combination of Bayesian analysis and geostatistics to provide technical staff with the ability to quantitatively merge soft and hard information for an estimate of the extent of contamination. Plume{trademark} provides an estimate of contamination extent, measures the uncertainty associated with the estimate, determines the value of additional sampling, …

To correctly capture the behavior of deforming material volumes in 3-D, the Los Alamos unstructured grid code X3D has access to a variety of moving mesh algorithms. The authors present two such algorithms which markedly differ in their computational complexity. The first algorithm, Moving finite Elements for Surfaces, has only 2-D computational complexity, in that they only solve for interface motions and obtain volume point motions through interpolation. The second algorithm, Minimum Error Gradient Adaption, has 3-D complexity, since the volume tetrahedral deformations must be computed. Naturally, the 3-D complexity algorithm can model realistically a larger class of physical problems than the lower complexity approach. They present examples in metallic grain growth and semiconductor process modeling.

The bulk morphology and microphysical characteristics of a cloud are both important in determining the cloud`s effect on radiative transfer. A better understanding of all these properties, and the links among them, are needed for developing adequate parameterizations of these components in climate models. The objective of this project is to develop remote sensing techniques for observing key cloud properties, including the linkages. The research has technique development and instrument development prongs.

Numerous laboratory and field studies have shown that the chemical form (i.e., speciation) of many metals and radionuclides is affected by the presence of naturally occurring organic matter (OM) and its degradation products. The effects of OM (e.g., wood products) on the speciation and, therefore, the mobility of Am, Bk, Cf, Cm, Cs, Ni, NpO{sub 2}, Rb, Sr. UO{sub 2}, and Zr were estimated through use of geochemical and groundwater flow modeling. Due to the complex mixture nature of naturally occurring OM, the OM system was simplified through use of surrogate compounds (citric acid and ethylenedinitrilotetraacetic acid (EDTA)) to estimate effects of OM on radionuclide mobility. Using this approach, OM was found to have no effect on the inventory limits for Cs, NpO{sub 2}, Rb and Zr. The inventory limits for the isotopes of Am, Bk, Cf, Cm, Ni, Pd, PuO{sub 2}, Sr, and UO{sub 2} calculated in the presence of OM decreased over a range of 26 percent for U-233 to 48 percent for Pu-240. The information in this report will be included in the next revision of the E-Area Vaults Performance Assessment.

Adhesive bonding/joining through microwave radiation curing has been evaluated as an alternative processing technology. This technique significantly reduces the required curing time for the adhesive while maintaining equivalent physical characteristics as the adhesive material is polymerized (crosslinked). This results in an improvement in the economics of the process. Testing of samples cured via microwave radiation for evaluation of mechanical properties indicated that the obtained values from the single lap-shear test are in the range of the conventionally cured samples. In general, the ultimate tensile strength, {sigma}{sub B}, for the microwave processed samples subjected to this single lap-shear test was slightly higher than for conventionally cured samples. This technology shows promise for being applicable to a wide range of high volume, consumer goods industries, where plastics and polymer composites will be processed.

The Adjacent-cell Preconditioner (AP) is derived for accelerating generic fixed-weight, Weighted Diamond Difference (WDD) neutron transport methods in multidimensional Cartesian geometry. The AP is determined by requiring: (a) the eigenvalue of the combined mesh sweep-AP iterations to vanish in the vicinity of the origin in Fourier space; and (b) the diagonal and off-diagonal elements of the preconditioner to satisfy a diffusion-like condition. The spectra of the resulting iterations for a wide range of problem parameters exhibit a spectral radius smaller than .25, that vanishes implying immediate convergence for very large computational cells. More importantly, unlike other unconditionally stable acceleration schemes, the AP is cell-centered and its spectral radius remains small when the cell aspect ratio approaches 0 or {infinity}. Testing of the AP and comparison of its rate of convergence to the standard Source Iterations (SI) for Burre`s Suite of Test Problems (BSTeP) demonstrates its high efficiency in reducing the number of iterations required to achieve convergence, especially for optically thick cells where acceleration is most needed.

The US military uses millions of Btu`s of thermal energy to heat, cool and deliver process thermal energy to buildings on military bases, much of which is transmitted through a pipeline system incorporating thousands of miles of pipe. Much of this pipeline system is in disrepair and is nearing the end of its useful life, and the boilers which supply it are old and often inefficient. In 1993, Brookhaven National Laboratory (BNL) proposed to SERDP a three-year effort to develop advanced systems of coupled diesel cogenerators and absorption chillers which would be particularly useful in providing a continuation of the services now provided by increasingly antiquated district systems. In mid-February, 1995, BNL learned that all subsequent funding for our program had been canceled. BNL staff continued to develop the Program Plan and to adhere to the requirements of the Execution Plan, but began to look for ways in which the work could be made relevant to Navy and DoD energy needs even without the extensive development plan formerly envisioned. The entire program was therefore re-oriented to look for ways in which small scale cogeneration and absorption chilling technologies, available through procurement rather than development, could provide some solutions to the …

The project objective is to demonstrate removal of 90--95% or more of the SO{sub 2} at approximately one-half the cost of conventional scrubbing technology; and to demonstrate significant reduction of space requirements. In this project, Pure Air has built a single SO{sub 2} absorber for a 528-MWe power plant. The absorber performs three functions in a single vessel: prequencher, absorber, and oxidation of sludge to gypsum. Additionally, the absorber is of a co- current design, in which the flue gas and scrubbing slurry move in the same direction and at a relatively high velocity compared to conventional scrubbers. These features all combine to yield a state- of-the-art SO{sub 2} absorber that is more compact and less expensive than conventional scrubbers. The project incorporated a number of technical features including the injection of pulverized limestone directly into the absorber, a device called an air rotary sparger located within the base of the absorber, and a novel wastewater evaporation system. The air rotary sparger combines the functions of agitation and air distribution into one piece of equipment to facilitate the oxidation of calcium sulfite to gypsum. Additionally, wastewater treatment is being demonstrated to minimize water disposal problems inherent in many high-chloride coals. …

In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This Annual Report for …

In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This report contains the …