The experimental high energy physics program is directed toward the execution of experiments that probe the basic constituents of matter and the forces between them. These experiments are carried out at national and international accelerator facilities. At the current time, we are primarily concentrating on the following projects: Direct photon production in hadronic reactions (Fermilab E706); Production of hybrid mesons in the nuclear Coulomb field; The D-Zero experiment at the Tevatron collider; Deep inelastic neutrino- and electron-nucleon scattering at FNAL and SLAC; Nonlinear QED at critical field strengths at SLAC; The Experiments at KEK (AMY, 17keV neutrino); The CDF experiment at the Tevatron collider; and SSC-related detector R D on scintillating tile- and diamond-based calorimetry and microstrip tracking detectors.

The experimental high energy physics program is directed toward the execution of experiments that probe the basic constituents of matter and the forces between them. These experiments are carried out at national and international accelerator facilities. At the current time, we are primarily concentrating on the following projects: Direct photon production in hadronic reactions (Fermilab E706); Production of hybrid mesons in the nuclear Coulomb field; The D-Zero experiment at the Tevatron collider; Deep inelastic neutrino- and electron-nucleon scattering at FNAL and SLAC; Nonlinear QED at critical field strengths at SLAC; The Experiments at KEK (AMY, 17keV neutrino); The CDF experiment at the Tevatron collider; and SSC-related detector R&D on scintillating tile- and diamond-based calorimetry and microstrip tracking detectors.

Work that was performed on a previous contract with the Los Alamos National Laboratory and subsequent work at NM Tech indicated that an intermittent heating and cooling cycle, produced by heating with the conventional blast from a small jet engine and then cooled with a stream of water, would prove to be successful in spalling additional rocks. New Mexico Tech has attempted to further the use of spallation drilling to suit applications for mining and oil and gas drilling by showing that the use of a heating and cooling system would successfully penetrate otherwise unspallable rocks. This process, while showing some success in previous experimentation, has proved to work only spasmodically. The rocks tested had zones that were not spallable or were so slowly spallable that non-uniform holes were produced. Because of these irregularities, further field experimentation is not now profitable.

The effort is divided into the following: high pressure transitions (Fe, RbCl), XAFS studies of perovskites under pressure (ReO[sub 3], high-[Tc] superconductors), studies of XANES of alkali halides, and Moessbauer studies (iron silicate spinel).

The effort is divided into the following: high pressure transitions (Fe, RbCl), XAFS studies of perovskites under pressure (ReO{sub 3}, high-{Tc} superconductors), studies of XANES of alkali halides, and Moessbauer studies (iron silicate spinel).

Full implementation of coal fuel sources will require more effective methods of providing ``clean coal`` as a fuel source. Methods must be developed to reduce the sulfur content of coal which significantly contributes to environmental pollution. This project is designed to develop methods for pre-combustion coal remediation by implementing recent advances in enzyme biochemistry. The novel approach of this study is incorporation of hydrophilic oxidative enzymes in reverse micelles in an organic solvent. Enzymes from commercial sources or microbial extracts are being investigated for their capacity to remove organic sulfur from coal by oxidation of the sulfur groups, splitting of C-S bonds and loss of sulfur as sulfuric acid. Dibenzothiophene (DBT) and ethylphenylsulfide (EPS) are serving as models of organic sulfur-containing components of coal in initial studies.

This report is about Conflict in Moldova

This report presents the findings of the Interagency Requirements Review of the Department of Energy (DOE) Environmental Restoration and Waste Management (ERWM) Program. The review was requested by Admiral Watkins to help determine the FY 1993 funding levels necessary to meet all legal requirements. The review was undertaken by analysts from the Office of Management and Budget (OMB) and Army Corps of Engineers, reporting to an Interagency Group (IAG) of senior Administration officials concerned with environmental cleanup issues. The purpose of the study was to determine the level of finding needed in FY 1993 for each ERWM Field Office to comply with all Federal, State, and local government legal requirements; all DOE Orders that establish standards for environment, safety and health (ES and H) management; and for prudent investments in other discretionary and management activities such as upgrading administrative buildings, information systems, etc. The study also reviewed the cost estimates supporting the ERWM proposed budget, including direct costs (labor, equipment) and indirect costs (administrative, landlord services, contractor overhead). The study did not analyze whether the Federal/State legal requirements and DOE Orders were necessary or whether the proposed clean-up remedies represent the most cost effective alternatives available.

This report describes the remedial action to achieve compliance with 29 CFR 1910 Occupational Safety and Health Administration (OSHA) requirements of fluorescent light fixtures containing PCBs at K-25 site. This remedial action is called the Remediation Plan for Fluorescent Light Fixtures Containing PCBs at the K-25 Site (The Plan). The Plan specifically discusses (1) conditions of non-compliance, (2) alternative solutions, (3) recommended solution, (4) remediation plan costs, (5) corrective action, (6) disposal of PCB waste, (7) training, and (8) plan conclusions. The results from inspections by Energy Systems personnel in 2 buildings at K-25 site and statistical extension of this data to 91 selected buildings at the K-25 site indicates that there are approximately 28,000 fluorescent light fixtures containing 47,036 ballasts. Approximately 38,531 contain PCBs and 2,799 of the 38,531 ballasts are leaking PCBs. Review of reportable occurrences at K-25 for the 12 month period of September 1990 through August 1991 shows that Energy Systems personnel reported 69 ballasts leaking PCBs. Each leaking ballast is in non-compliance with 29 CFR 1910 - Table Z-1-A. The age of the K-25 facilities indicate a continued and potential increase in ballasts leaking PCBs. This report considers 4 alternative solutions for dealing with the …

None

The Office of Management and Budget (OMB) and the U.S. Army Corps of Engineers have completed an analysis of the Department of Energy's (DOE) Fiscal Year (FY) 1993 budget request for its Environmental Restoration and Waste Management (ERWM) program. The results were presented to an interagency review group (IAG) of senior-Administration officials for their consideration in the budget process. This analysis included evaluations of the underlying legal requirements and cost estimates on which the ERWM budget request was based. The major conclusions are contained in a separate report entitled, ''Interagency Review of the Department of Energy Environmental Restoration and Waste Management Program.'' This Corps supplemental report provides greater detail on the cost analysis.

Deshpande, Gupta and Pal neglected the presence of a complex phase in the mass matrix and in the Yukawa coupling matrices of the down-type quarks I argue that phase should not be neglected, because it can explain the observed CP violation. The mechanism of CP violation considered by those authors may certainly be present, but for simplicity one may want to eliminate it, by restricting the soft-breaking sector of the Higgs potential in such a way that complex Higgs bosons propagators do not occur.

Deshpande, Gupta and Pal neglected the presence of a complex phase in the mass matrix and in the Yukawa coupling matrices of the down-type quarks I argue that phase should not be neglected, because it can explain the observed CP violation. The mechanism of CP violation considered by those authors may certainly be present, but for simplicity one may want to eliminate it, by restricting the soft-breaking sector of the Higgs potential in such a way that complex Higgs bosons propagators do not occur.

The long term goal of our efforts is to develop accurate predictive methods for description of equilibrium phase properties for a variety of types of mixtures and operating conditions. The specific objectives of the work specified herein include: (1) development of an experimental facility having the capability to provide data on equilibrium phase compositions (solubilities) and liquid densities, and doing so with greater accuracy and speed than our previous facility, (2) measurement of equilibrium phase properties for systematically-selected mixtures-specifically those containing important solute gases (such as hydrogen, carbon monoxide, methane, ethane, carbonyl sulfide, ammonia) in a series of heavy paraffinic, naphthenic and aromatic solvents (e.g., n-decane, n-eicosane, n-octacosane, n-hexatriacontane, cyclohexane, Decalin, perhydrophenanthrene, perhydropyrene, benzene, naphthalene, phenanthrene, pyrene), (3) testing/development of correlation frameworks for representing the phase behavior of fluids of the type encountered in coal conversion processes, and (4) generalization of parameters in the correlation frameworks to enable accurate predictions for systems of the type studied, permitting predictions to be made for systems and conditions other than those for which experimental data are available.

The long term goal of our efforts is to develop accurate predictive methods for description of equilibrium phase properties for a variety of types of mixtures and operating conditions. The specific objectives of the work specified herein include: (1) development of an experimental facility having the capability to provide data on equilibrium phase compositions (solubilities) and liquid densities, and doing so with greater accuracy and speed than our previous facility, (2) measurement of equilibrium phase properties for systematically-selected mixtures-specifically those containing important solute gases (such as hydrogen, carbon monoxide, methane, ethane, carbonyl sulfide, ammonia) in a series of heavy paraffinic, naphthenic and aromatic solvents (e.g., n-decane, n-eicosane, n-octacosane, n-hexatriacontane, cyclohexane, Decalin, perhydrophenanthrene, perhydropyrene, benzene, naphthalene, phenanthrene, pyrene), (3) testing/development of correlation frameworks for representing the phase behavior of fluids of the type encountered in coal conversion processes, and (4) generalization of parameters in the correlation frameworks to enable accurate predictions for systems of the type studied, permitting predictions to be made for systems and conditions other than those for which experimental data are available.

Air infiltration is an important factor in heat loss and indoor air quality; in modern well-insulated homes, it may account for as much as half of the total heat loss. Due to the recent emphasis by home buyers and manufacturers on energy efficiency, tighter homes are being constructed. In the past, it was assumed that natural infiltration would provide adequate ventilation to maintain acceptable indoor air quality, but this is no longer the case in modern energy-efficient homes. This report summarizes the results of infiltration measurements made on two groups of manufactured homes in the Bonneville Power Administration (BPA) service area: 131 energy-efficient homes constructed under RCDP, and a control group of 29 homes not participating in energy-efficiency programs.

Air infiltration is an important factor in heat loss and indoor air quality; in modern well-insulated homes, it may account for as much as half of the total heat loss. Due to the recent emphasis by home buyers and manufacturers on energy efficiency, tighter homes are being constructed. In the past, it was assumed that natural infiltration would provide adequate ventilation to maintain acceptable indoor air quality, but this is no longer the case in modern energy-efficient homes. This report summarizes the results of infiltration measurements made on two groups of manufactured homes in the Bonneville Power Administration (BPA) service area: 131 energy-efficient homes constructed under RCDP, and a control group of 29 homes not participating in energy-efficiency programs.

A series of seven tests were conducted to evaluate the effectiveness of scrubbing both NO{sub 2} and SO{sub 2} in a spray dryer/baghouse system. The operating conditions specified were a high spray dryer inlet temperature (500{degrees}F), and a high spray dryer outlet temperature (250 to 300 {degrees}F). The data required to adequately evaluate the effectiveness of this technology is enclosed. Discussion of some of the variables as well as an itemized list of the testing information is part of the report.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

The objectives of the study are to: Develop a baseline design for indirect liquefaction using advanced Fischer-Tropsch (F-T) technology. Prepare the capital and operating costs for the baseline design. Develop a process flowsheet simulation (PFS) model. The baseline design, the economic analysis, and the computer model will be the major research planning tools that Pittsburgh Energy Technology Center will use to plan, guide, and evaluate its ongoing and future research and commercialization programs relating to indirect coal liquefaction for the manufacture of synthetic liquid fuels from coal.

The objectives of the study are to: Develop a baseline design for indirect liquefaction using advanced Fischer-Tropsch (F-T) technology. Prepare the capital and operating costs for the baseline design. Develop a process flowsheet simulation (PFS) model. The baseline design, the economic analysis, and the computer model will be the major research planning tools that Pittsburgh Energy Technology Center will use to plan, guide, and evaluate its ongoing and future research and commercialization programs relating to indirect coal liquefaction for the manufacture of synthetic liquid fuels from coal.

Department of Energy national laboratories are charged with anticipating with a long leadtime which technologies for nuclear warheads should be developed. The Safe Warhead System Study was constituted to provide Lawrence Livermore National Laboratory management with information and suggestions for making such decisions for enhanced safety warheads. The Minuteman III replacement warheads were analyzed as a test case and that information was used to identify and describe the dominant issues, to develop a methodology and to make initial recommendations. The test case work resulted in several insights into how ongoing design and engineering interacts with the technology ranking and on how to cope with the ubiquitous uncertainties relating to our current ICBM force.

The purpose of this research program is to identify and evaluate a variety of additives capable of increasing particle cohesion which could be used for improving collection efficiency in an ESP. A three-phase screening process will be used to provide the, evaluation of many additives in a logical and cost-effective manner. The three step approach involves the following experimental setups: 1. Provide a preliminary screening in the laboratory by measuring the effects of various conditioning agents on reentrainment of flyash particles in an electric field operating at simulated flue gas conditions. 2. Evaluate the successful additives using a 100 acfm bench-scale ESP operating on actual flue gas. 3. Obtain the data required for scaling up the technology by testing the two or three most promising conditioning agents at the pilot scale.

The purpose of this research program is to identify and evaluate a variety of additives capable of increasing particle cohesion which could be used for improving collection efficiency in an ESP. A three-phase screening process will be used to provide the, evaluation of many additives in a logical and cost-effective manner. The three step approach involves the following experimental setups: 1. Provide a preliminary screening in the laboratory by measuring the effects of various conditioning agents on reentrainment of flyash particles in an electric field operating at simulated flue gas conditions. 2. Evaluate the successful additives using a 100 acfm bench-scale ESP operating on actual flue gas. 3. Obtain the data required for scaling up the technology by testing the two or three most promising conditioning agents at the pilot scale.