Formation damage studies using artificially fractured, low-permeability sandstone cores indicate that viscosified fracturing fluids can severely restrict gas flow through these types of narrow fractures. These studies were performed in support of the Department of Energy's Multiwell Experiment (MWX). Extensive geological and production evaluations at the MWX site indicate that the presence of a natural fracture system is largely responsible for unstimulated gas production. The laboratory formation damage studies were designed to examine changes in cracked core permeability to gas caused by fracturing fluid residues introduced into such narrow fractures during fluid leakoff. Polysaccharide polymers caused significant reduction (up to 95%) to gas flow through cracked cores. Polymer fracturing fluid gels used in this study included hydroxypropyl guar, hydroxyethyl cellulose, and xanthan gum. In contrast, polyacrylamide gels caused little or no reduction in gas flow through cracked cores after liquid cleanup. Other components of fracturing fluids (surfactants, breakers, etc.) caused less damage to gas flows. Other factors affecting gas flow through cracked cores were investigated, including the effects of net confining stress and non-Darcy flow parameters. Results are related to some of the problems observed during the stimulation program conducted for the MWX. 24 refs., 4 figs., 7 tabs.

Measurements of electron density at seven D-region altidues were made with the Arecibo radar during a Class-X solar flare on 18 August 1979. Measurements of solar x-ray fluxes during the same period were available from the GOES-2 satellite (0.5 to 4 /angstrom/ and 1 to 8 /angstrom/) and from ISEE-3 (in four bands between 26 and 400 keV). From the x-ray flux data we computed ionization rates in the D-region and the associated chemical changes, using a coupled atmospheric chemistry and diffusion model (with 836 chemical reactions and 19 vertical levels). The computed electron densities matched the data fairly well after we had adjusted the rate coefficients of two reactions. We discuss the hierarchies among the many flare-induced chemical reactions in two altitude ranges within the D-region and the effects of adjusting several other rate coefficients. 51 refs., 6 figs., 3 tabs.

The 831 references covering the period 1980 through Feb. 1988, are arranged under the following: analysis and evaluation, building equipment, building thermal envelope systems and materials, community systems and cogeneration, residential conservation service, retrofit, advanced heat engine ceramics, alternative fuels, microemulsion fuels, industrial chemical heat pumps, materials for waste heat utilization, energy conversion and utilization materials, tribology, emergency energy conservation,inventions, electric energy systems, thermal storage, biofuels production, biotechnology, solar technology, geothermal, and continuous chromatography in multicomponent separations. An author index is included.

The monitoring program at the Niagara Falls Storage Site (NFSS) measures radon gas concentrations in air; external gamma radiation levels; and uranium and radium concentrations in surface water, groundwater, and sediment. To verify that the site is in compliance with the DOE radiation protection standard and to assess its potential effect on public health, the radiation dose was calculated for the maximally exposed individual. Based on the conservative scenario described in the report, this individual would receive an annual external exposure approximately equivalent to 6 percent of the DOE radiation protection standard of 100 mrem/yr. By comparison, the incremental dose received from living in a brick house versus a wooden house is 10 mrem/yr above background. The cumulative dose to the population within an 80-km (50-mi) radius of the NFSS that would result from radioactive materials present at the site would be indistinguishable from the dose that the same population would receive from naturally occurring radioactive sources. Results of the 1987 monitoring show that the NFSS is in compliance with the DOE radiation protection standard. 13 refs., 10 figs., 20 tabs.

The components of geothermal brines that cause corrosion and scaling problems are reviewed, especially brine pH, CO/sub 2/, H/sub 2/S, oxygen (from air), silicia, calcium, sulfides, and suspended particulates. Instrumental methods for on-line measurement are discussed to show how to keep costs low by operating a geothermal plant from a position of knowledge of what is occurring to the plant materials. The US Department of Energy research and development program in brine chemistry and on-line instrument development at Pacific Northwest Laboratory is discussed along with the strategy for commercial availability of new instruments to the geothermal industry.

Because soft x-ray pulse-height-analysis (PHA) spectra contain chordal information, the electron temperature and the radiation intensity (enhancement factor) measurements do not represent the local values. Assuming that the profile Ansatz for the electron temperature and density is of the form n/sub eo/(1-(ra)/sup 2/)/sup ..cap alpha../ and kT/sub eo/(1--(ra)/sup 2/)/sup ..beta../, we obtain the correction factors for the electron temperature and the enhancement factor as a function of the profile coefficients ..cap alpha.. and ..beta.. and the energy at which the evaluation was made. The corrected values of the temperature are typically between 1 to 10% higher than the values derived from the raw chordal spectra. We also correct the measured radiation intensity for the profile effects. Finally, the spectrum distortion due to pulse pile-up effects is evaluated. A set of curves is given from which the distortion of the spectrum can be obtained, if the electron temperature, the Be or Al filter thickness, and the electronic parameters of the acquisition system are known. 7 refs., 23 figs.

The purpose of this note is to describe the electrical and mechanical properites of particle accelerator rf cavities in a manner which will be useful to physics and engineering graduates entering the accelerator field. The discussion will be limited to proton (or antiproton) synchrotron accelerators or storage rings operating roughly in the range of 20 to 200 MHz. The very high gradient, fixed frequency UHF or microwave devices appropriate for electron machines and the somewhat lower frequency and broader bandwidth devices required for heavy ion accelerators are discussed extensively in other papers in this series. While it is common pratice to employ field calculation programs such as SUPERFISH, URMEL, or MAFIA as design aids in the development of rf cavities, we attempt here to elucidate various of the design parameters commonly dealt with in proton machines through the use of simple standing wave coaxial resonator expressions. In so doing, we treat only standing wave structures. Although low-impedance, moderately broad pass-band travelling wave accelerating systems are used in the CERN SPS, such systems are more commonly found in linacs, and they have not been used widely in large cyclic accelerators. Two appendices providing useful supporting material regarding relativistic particle dynamics and …

The effects of whole-body inhalation exposures to 1,3-butadiene on the reproductive system was evaluated. The results of dominant lethality in CD-1 male mice that were exposed to 1,3-butadiene are described. Subsequent to exposure, males were mated with two unexposed females. Mating was continued for 8 weeks with replacement of two females each week. Gravid uteri were removed, and the total number, position and status of implantations were determined. The mice were weighed prior to exposure and at 0, 1, 2, 3, 4, 5, 6, 7, and 8 weeks after exposure and at sacrifice. The animals were observed for mortality, morbidity and signs of toxicity throughout the study. 19 refs., 5 figs., 9 tabs.

Rock samples from the Salton Sea Geothermal Field (sandstone, tuff, granite) and from accretionary prism sediments along the convergent margins in southeast Alaska and southwest Japan have been dated by the /sup 40/Ar/sup 39/Ar method. Paleotemperatures have been calculated. (ACR

The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environment protection. These activities are designed to protect the worker, the public, and the environment. Many disciplines are required to meet the responsibilities, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science, epidemiology, and waste management. New and challenging health and safety problems arise occasionally from the diverse research and development work of the Laboratory. Research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed to study specific problems for the Department of Energy and to help develop better occupational health and safety practices.

Imaging diagnostics are used for spatially/emdash/and temporally/emdash/resolved quantitative measurements of plasma properties such as the ionization particle source, particle and energy loss, and impurity radiation in magnetically confined fusion plasmas. Diagnostics equipped with multi-element solid-state detectors (often with image intensifiers) are well suited to the environment of large fusion machines with high magnetic field and x-ray and neutron fluxes. We have both conventional (16msframe) and highspeed video cameras to measure neutral deuterium H/sub ..cap alpha../ (6563 /angstrom/) emissions from fusion plasmas. Continuous high-speed measurements are made with video cameras operating at 0.1 to 0.5 msframe; gated cameras provide snapshots of 10 to 100 ..mu..s during each 16-ms video frame. Digital data acquisition and absolute intensity calibrations of the cameras enable detailed quantitative source measurements: these are extremely important in determining the particle balance of the plasma. In a liner confinement device, radial transport can be determined from the total particle balance. In a toroidal confinement device, the details of particle recycling can be determined. Optical imaging in other regions of the spectrum are also important, particularly for the diverter region of large tokamaks. Absolutely calibrated infrared cameras have been used to image to temperature changes in the wall and thereby …

Reservoir performance is one of the key issues that have to be addressed before going ahead with the development of a geothermal field. In order to select the type and size of the power plant and design other surface installations, it is necessary to know the characteristics of the production wells and of the produced fluids, and to predict the changes over a 10--30 year period. This is not a straightforward task, as in most cases the calculations have to be made on the basis of data collected before significant fluid volumes have been extracted from the reservoir. The paper describes the methodology used in predicting the long-term performance of hydrothermal systems, as well as DOE/GTD-sponsored research aimed at reducing the uncertainties associated with these predictions. 27 refs., 1 fig.

Two-photon transitions have been examined in molecular hydrogen using coherent vacuum ultraviolet (VUV) photons at a fixed wavelength of 118 nm and a tunable photon from a dye laser. Though the VUV intensity is very weak (/approximately/100 nJ per pulse) it was utilized very efficiently since most VUV photons in the ionoization region were absorbed. This is the first time that coherent VUV light has been employed with tunable visible light for the production of two-photon spectra and the measurement of two-photon rates. A new parameter is proposed for direct comparison of the data from various two-photon experiments. 4 refs., 2 figs., 1 tab.

The Idaho Department of Fish and Game has been monitoring and evaluating existing and proposed habitat improvement projects for steelhead (Salmo gairdneri) and chinook salmon (Oncorhynchus tshawytscha) in the Clearwater and Salmon River drainages over the last four years. Projects included in the evaluation are funded by, or proposed for funding by, the Bonneville Power Administration (BPA) under the Northwest Power Planning Act as off-site mitigation for downstream hydropower development on the Snake and Columbia rivers. A mitigation record is being developed to use increased smolt production at full seeding as the best measure of benefit from a habitat enhancement project. Determination of full benefit from a project depends on presence of adequate numbers of fish to document actual increases in fish production. The depressed nature of upriver anadromous stocks have precluded attainment of full benefit of any habitat project in Idaho. Partial benefit will be credited to the mitigation record in the interim period of run restoration. According to the BPA Work Plan, project implementors have the primary responsibility for measuring physical habitat and estimating habitat change. To date, Idaho habitat projects have been implemented primarily by the US Forest Service (USFS). The Shoshone-Bannock Tribes (SBT) have sponsored three …

This study is aimed at providing a relative comparison of the thermodynamic and economic performance in electric applications for fixed mirror distributed focus (FMDF) solar thermal concepts which have been studied and developed in the DOE solar thermal program. Following the completion of earlier systems comparison studies in the late 1970's there have been a number of years of progress in solar thermal technology. This progress includes developing new solar components, improving component and system design details, constructing working systems, and collecting operating data on the systems. This study povides an update of the expected performance and cost of the major components, and an overall system energy cost for the FMDDF concepts evaluated. The projections in this study are for the late 1990's and are based on the potential capabilities that might be achieved with further technology development.

The very high luminosities (>>10/sup 32/cm/sup /minus/2/sec/sup /minus/1/) available in the Fermilab fixed target experimental areas offer immediate opportunities for producing large samples (>10/sup 8/ of B hadrons in individual experiments. The possibilities of accumulating large samples of B decays are limited by experimental techniques and trigger strategies and not by available luminosity. At the present time one experiment, E771, is approved to begin B physics experimentation and several other experimental possibilities are being discussed. Some of the problems and the potential of B experiments at fixed target energies as B factories are discussed.

A precision measurement of neutrino-electron elastic scattering from a beam stop neutrino source at LAMPF is proposed. The total error in sin/sup 2/theta/sub W/ is estimated to be +-0.89/percent/. The experiment also will be sensitive to neutrino oscillations and supernova-neutrino bursts, and should set improved limits on the neutrino-charge radius and magnetic-dipole moment. The detector consists of a 2.5-million-gallon tank of water with approximately 14,000 photomultiplier tubes lining the surfaces of the tank. Neutrino-electron scattering events will be observed from the /hacek C/erenkov radiation emitted by the electrons in the water. 19 refs.

The present report describes the results of a study of the morphology of epididymal sperm heads of B6C3F1 mice that were exposed to varying concentrations of 1,3-butadiene. During the fifth post-exposure week, the animals were killed and examined for gross lesions of the reproductive tract; suspensions of the epididymal sperm were prepared for morphologic evaluations. No mortality was observed in any of the inhalation exposure groups. Transient toxic signs, including piloerection and dyspnea, were evident during a 20- to 30-minute period following exposure to 5000 ppM. Mean values for body weights and weight gains of the mice exposed to 1,3-butadiene were not significantly different from control values. A concentration-related increase in the incidence of sperm-head abnormalities was evident and the percentage of sperm heads that were morphologically abnormal was significantly higher in mice exposed to 1000 and 5000 ppM than in the controls. 23 refs., 2 figs., 6 tabs.

An overview of the design and the initial studies for the Advanced Light Source is given. The research efforts for the Center for X-Ray Optics include x-ray imaging, multilayer mirror technology, x-ray sources and detectors, spectroscopy and scattering, and synchrotron radiation projects. The Accelerator Operations highlights include the research by users in nuclear physics, biology and medicine. The upgrade of the Bevalac is also discussed. The High Energy Physics Technology review includes the development of superconducting magnets and superconducting cables. A review of the Heavy-Ion Fusion Accelerator Research is also presented. The Magnetic Fusion Energy research included the development of ion sources, accelerators for negative ions, diagnostics, and theoretical plasma physics. (WRF)

Defect structures in YBa/sub 2/Cu/sub 3/O/sub 7/minus/delta/ produced by electron irradiation at 300/degree/K, were investigated by transmission electron microscopy. Threshold energies for the production of visible defects were determined to b 152 keV and 131 keV (+- 7 keV) in directions near the a- and b-axes, respectively (b > a, both perpendicular to c, the long axis in the orthorhombic structure). During above-threshold irradiations in an electron flux of 3 x 10 /sup 18/ cm/sup /minus/2/s/sup /minus/1/, extended defects were observed to form and grow to sizes of 10--50 nm over 15 minutes, in material thicknesses varying between 20 and 200 nm. Upon irradiation between the a- and b-thresholds, movement of twin plane boundaries and shrinkage of twinned volume were observed. All these findings suggest oxygen atom displacements in the basal plane with recoil energies near 20 eV. Above-threshold irradiations also show the collapse of c-axis long-range order into a planar faulted defect structure with short range order peaks at 1.2 c and 1.07 c, depending on the irradiation direction. 9 refs., 4 figs.

Increasing numbers of designers are choosing beryllium for fusion reactor blankets because it, among all nonfissile materials, produces the highest number (2.5 neutron in an infinite media) of neutrons per 14-MeV incident neutron. In amounts of about 20 cm of equivalent solid density, it can be used to produce fissile material, to breed all the tritium consumed in ITER from outboard blankets only, and in designs to produce Co-60. The problem is that predictions of neutron multiplication in beryllium are off by some 10 to 20% and appear to be on the high side, which means that better multiplication measurements and numerical methods are needed. The n,2n reactions result in two helium atoms, which cause radiation damage in the form of hardening at low temperatures (<300/degree/C) and swelling at high temperatures (>300/degree/C). The usual way beryllium parts are made is by hot pressing the powder. A lower cost method is to cold press and then sinter. There is no radiation damage data on this form of beryllium. The issues of corrosion, safety relative to the release of the tritium built-up inside beryllium, and recycle of used beryllium are also discussed. 10 figs.

Data from a group of three MOD-2 wind turbines and two meteorological towers at Goodnoe Hills were analyzed to evaluate turbine power output and wake effects (losses in power production due to operation of upwind turbines), and atmospheric factors influencing them. The influences of variations in the ambient wind speed, wind direction, and turbulence intensity were the primary factors evaluated. Meteorological and turbine data collected at the Goodnoe Hills site from April 1 to October 17, 1985, were examined to select the data sets for these analyses. Wind data from the two meteorological towers were evaluated to estimate the effect of a wake from an upwind turbine on the wind flow measured at the downwind tower. Maximum velocity deficits were about 25% and 12% at downwind distances of 5.8 and 8.3 rotor diameters (D), respectively. However, the maximum deficits at 5.8 D were about 14/degree/ off the centerline orientation between the turbine and the tower, indicating significant wake curvature. Velocity deficits were found to depend on the ambient wind speed, ranging from 27% at lower speeds (15 to 25 mph) to 20% at higher speeds (30 to 35 mph). Turbulence intensity increases dramatically in the wake by factors of about …

The Argonne Advanced Acceleration Test Facility is designed as a powerful tool to test ideas for very high gradient acceleration schemes based on direct beam excitation of plasmas, metal structures, dielectrics, etc. The characteristic size in these systems is )approximately) 1 cm, corresponding to frequencies )approximately) 10 GHz. The question addressed here is whether the special features of this facility have application as well to the development of components for the more conventional, lower frequency, accelerators now operating or under development. It is suggested that the usefulness of the facility for the development of conventional systems could be enhanced by a provision for longer time delay between driver and witness beam pulses. 9 refs., 2 figs.

The Light Weight Radioisotopic Heater Unit (LWRHU) is a /sup 238/PuO/sub 2)minus/ fueled heat source designed to provide a thermal watt of power for space missions. The LWRHU will be used to maintain the temperature of various components on the spcaecraft at the required level. The heat source consists of a /sup 238/PuO/sub 2/ fuel pellet, a Pt-30Rh capsule, a pyrolytic graphite insulator, and a woven graphite aeroshell assembly. Los Alamos National Laboratory (LANL) has fabricated 134 heater units which will be used on the Galileo Mission. This report summarizes the specifications, fabrication processes, and production data for the heat sources fabricated at LANL. 4 figs., 15 tabs