This report has details of the radiometric data.

This report is a compilation of abstracts of papers, internal reports, and talks presented during 1979 at national and international meetings by members of the Earth Sciences Division, Lawrence Livermore Laboratory. The arrangement is alphabetical (by author). For a given report, a bibliographic reference appears under the name of each coauthor, but the abstract iself is given only under the name of the first author or the first Earth Sciences Division author. A topical index at the end of the report provides useful cross references, while indicating major areas of research interest in the Earth Sciences Division.

A three-dimensional thermal analysis using finite difference techniques was performed to determine the near-field response of a baseline spent fuel repository in a deep geologic salt medium. A baseline design incorporates previous thermal modeling experience and OWI recommendations for areal thermal loading in specifying the waste form properties, package details, and emplacement configuration. The base case in this thermal analysis considers one 10-year old PWR spent fuel assembly emplaced to yield a 36 kW/acre (8.9 W/m/sup 2/) loading. A unit cell model in an infinite array is used to simplify the problem and provide upper-bound temperatures. Boundary conditions are imposed which allow simulations to 1000 years. Variations studied include a comparison of ventilated and unventilated storage room conditions, emplacement packages with and without air gaps surrounding the canister, and room cool-down scenarios with ventilation following an unventilated state for retrieval purposes. It was found that at this low-power level, ventilating the emplacement room has an immediate cooling influence on the canister and effectively maintains the emplacement room floor near the temperature of the ventilating air.

Work on getting the Brookhaven National Laboratories computer program for modeling ground coil performance operational is described. Arrangements made to sink two 40 ft vertical wells for soil temperature measurements are described. Methods for evaluating the effect of pipe diameter, length, spacing, and material were investigated. Calculation results are shown. (MHR)

Minutes of the April 29, 1980, meeting of the American National Standards Institute steering committee on solar energy standards development are given. Attachments include correspondence from individuals and organizations which primarily describe the Solar Public Interest Coordination Committee (SPICC) and its recent activities. Also a report on the meeting of the ANSI subcommittee on international activity is attached. (WHK)

Environmental, health, and safety considerations in the manufacturing, operation, and disposal of photovoltaic cells are briefly discussed, and the role of BNL as the field center for DOE information in this area is described. (WHK)

Scaling rules are derived for field-reversed plasmas whose dimensions are common multiples of the ion gyroradius in the vacuum field. These rules are then applied to the tandem MFTF configuration, and it is shown that field reversal appears to be possible for neutral beam currents of the order of 150 amperes, provided that the electron temperature is at least 500 eV.

Capacitively loaded resonant line section accelerating structures are discussed. Prototype models were measured at low levels, and calculations were made to predict high level operation. High current composite beams of multiple-beamlets as accelerated by a MEQALAC were assumed.

Work on this project is focused on developing design and licensing information for the model facility. Three major subcontracts have been approved by DOE and the design effort is progressing satisfactorily on the security system, rack design, and the soils structural and seismic design which these contracts cover. Licensing activities are progressing satisfactorily. About 50% of the Environmental Report is drafted and issued for preliminary review. Approximately 15% of the Safety Analysis Report has been drafted.

The final report of DBS Corporation on the model simplification project is presented. The purpose of the project is to develop computer-assisted model simplification. The contributions of DBS to this project where an initial overall project assessment, contributions to design principles and testing procedures, specific experimental designs, and initial test results. The main contributions of DBS to this project were in the area of LP matrix scaling, and particularly in the potential usefulness of shadow price information for model simplification. An algorithm for obtaining approximate shadow price information was developed and subjected to initial small-scale testing with promising results.

Information on monitoring activities is reported in two sections for EDB/ERA/INIS. The first section covers all information reported except Appendix D, which gives details of sampling and analytical procedures for environmental monitoring used at Lawrence Livermore Laboratory. A separate abstract was prepared for Appendix D. (JGB)

A one-dimensional radial transport code which was developed to study radial transport in tandem mirror machines has been used to perform buildup studies for the central-cell plasma of the proposed MFTF-B experiment. The effects of the cold, unpumped, neutral gas (which accompanies the hot, neutral-beam injection in the central cell) upon the central-cell plasma have been studied for the low-epsilon (epsilon Identical with (..cap omega../sub pi//..cap omega../sub ci/)2) mode and for the two-component mode. A mode here is defined as a particular set of parameters (density, temperature, etc.) under which the experiment will be performed. A very preliminary study of the effects of plateau resonant transport upon the equilibrium plasma obtained for the low-epsilon mode of operation has also been performed.

Progress is reported in the following subject areas: (1) chemistry of the arogenate molecule; (2) plant enzymology at the organismal level; (3) isolation of regulatory mutants in tobacco; and (4) stability of the haploid state in Nicotiana sylvestris.

Measurements in the Geysers area from April until October 1979 when the onset of seasonal rains limited field work are presented. Field studies involved the following three basic types of measurements: cooling tower drift deposition, plant ecological studies, and animal population studies. Brief summaries of the data are presented to demonstrate the types of information obtained. (MHR)

In response to a request from the Water Reactor Safety Research Division of the US NRC, a preliminary study is provided which identifies key features and consideration involved in planning a comprehensive in-plant Safety Relief Valve experimental program for a Mark III containment design. The report provides identification of program objectives, measurement system requirements, and some details quantifying expected system response. In addition, a preliminary test matrix is outlined which involves a supporting philosophy intended to enhance the usefulness of the experimental results for all members of the program team: experimentalists, analysts, and plant operator.

The purpose of this research program is to investigate the technical and economic feasibility of producing solar-cell-quality sheet silicon by coating inexpensive ceramic substrates with a thin layer of polycrystalline silicon. The coating methods to be developed are directed toward a minimum-cost process for producing solar cells with a terrestrial conversion efficiency of 11% or greater. By applying a graphite coating to one face of a ceramic substrate, molten silicon can be made to wet only that graphite-coated face and produce uniform, thin layers of large-grain polycrystalline silicon; thus, only a minimal quantity of silicon is consumed. A dip-coating method for putting silicon on ceramic (SOC) has been shown to produce solar-cell-quality sheet silicon. This method and a continuous-coating process also being investigated have excellent scale-up potential which offers an outstanding, cost-effective way to manufacture large-area solar cells. The dip-coating investigation has shown that, as the substrate is pulled from the molten silicon, crystallization continues to occur from previously grown silicon. Therefore, as the substrate length is increased (as would be the case in a scaled-up process), the expectancy for larger crystallites increases. Results and accomplishments are reported. (WHK)

The progress of four bills relating to geothermal energy is reported. The current regulatory activities of the California Energy Commission, the Lake County Planning Commission/Lake County Air Pollution Control District, the Governor's Office of Planning and Research, the State Lands' Commission, and the California Public Utilities Commission are reviewed. (MHR)

This report presents the results of work performed from October 1, 1979 through December 31, 1979. Work covered in this report includes the activities associated with the status of the simulated reactor helium supply system, testing equipment and gas chemistry analysis instrumentation and equipment. The progress in the screening test program is described. This includes: screening creep results, weight gain and post-exposure mechanical properties for materials thermally exposed at 750/sup 0/ and 850/sup 0/C (1382/sup 0/ and 1562/sup 0/F). In addition, the status of the data management system is described.

Zinc electrowinning data, obtained with hydrogen depolarized anodes operating in a plant feed electrolyte at 55/sup 0/C, are presented in this quarterly report for investigations involving the following: performance of an anode containing a low platinum loading, i.e. 0.09 mg/cm/sup 2/ instead of the typical 0.33 mg/cm/sup 2/, and an anode catalyzed with palladium instead of platinum; establishment of a feed and bleed system to maintain a constant electrolyte composition; exploratory experiments on the effect of the rate and mode of electrolyte flow on the quality of the zinc plate at high current densities; performance of the anode with feeds of varying degrees of purification pre-treatment, and containing either 50 or 150 g/l Zn/sup + +/; the effect upon cell voltage of decreasing the hydrogen flowrate to the anode by dilution of the feed gas with nitrogen; the effect upon cell voltage of increasing the back pressure of the hydrogen gas fed to the anode; the effect upon energy consumption and current efficiency of varying the current density and the Zn/sup + +/ concentration; trace elemental analysis of a cathodic zinc plate of commercial-size thickness, as produced using the catalytic H/sub 2/ anode; further comparison of the effects of feed …

Simulated radioactive waste solidification by a lower temperature ceramic (cement) process is being investigated. The monazite component (simulated by NdPO/sub 4/) of supercalcine-ceramic has been solidified in cement and found to generate a solid form with low leachability. Several types of commercial cements and modifications thereof were used. No detectable release of Nd or P was found through characterizing the products of accelerated hydrothermal leaching at 473/sup 0/K (200/sup 0/C) and 30.4 MPa (300 bars) pressure.

This report details activities in the Quality Control Program at Mound Laboratory during the reporting period of January through March 1980.

This report presents the results of work aimed at understanding the hydrodynamic behavior of the H-Coal reactor. A summary of the literature search related to the fluid dynamic behavior of gas/liquid/solid systems has been presented. Design details of a cold flow unit were discussed. The process design of this cold flow model followed practices established by HRI in their process development unit. The cold fow unit has been used to conduct experiments with nitrogen, kerosene, or kerosene/coal char slurries, and HDS catalyst, which at room temperature have properties similar to those existing in the H-Coal reactor. Mineral oil, a high-viscosity liquid, was also used. The volume fractions occupied by gas/liquid slurries and catalyst particles were determined by several experimental techniques. The use of a mini-computer for data collection and calculation has greatly accelerated the analysis and reporting of data. Data on nitrogen/kerosene/HDS catalyst and coal char fines are presented in this paper. Correlations identified in the literature search were utilized to analyze the data. From this analysis it became evident that the Richardson-Zaki correlation describes the effect of slurry flow rate on catalyst expansion. Three-phase fluidization data were analyzed with two models.

A description is given of the construction, operation and calibration of the 50 MeV polarimeter which was used at the ZGS. The dependence of the observed counts on various parameters, including the beam polarization, beam intensity and the solid angle in the two polarimeter arms is also discussed.

Construction of the new trickle-bed reactor was completed and one experiment was conducted. The experimental run was made using a Pamco coal-derived liquid containing 0.40% sulfur and 0.95% nitrogen. The catalyst utilized was an American Cyanamide HDN-30, Ni-Mo-Al/sub 2/O/sub 3/. Run conditions were at 399C (750F), 1500 psig and space times up to two hours. Sample analyses are not yet available from this experiment. Two runs were completed in the Catalyst Life Test Unit (CLTU) utilizing a liquid containing 50% Synthoil and 50% Raw Anthracene oil. This fluid has a 0.54% sulfur and 1.21% nitrogen. Two Ni-MoAl/sub 2/O/sub 3/ catalysts were used - Shell-324, and H-Oil. Both experiments were terminated prematurely because of equipment malfunction. Sample analyses are not yet available from these two experiments.