From abstract: Absolute cross sections for the production of charged secondary particles is the bombardments of aluminum, nickel, silver, and gold by 332-Mev protons, 187-deuterons, and 380-Mev alpha particles have been determined.

"The accuracy of the substitute-stringer approach for including the effects of shear lag in the calculation of the transverse modes and frequencies of multistringer box beams is investigated. Box beams, the covers of which consist of normal-stress-carrying stringers on sheets which carry not only shear but also normal stress, are analyzed exactly. Frequencies of beams with various numbers of stringers, obtained by means of this exact analysis, serve to determine the possible accuracy of the frequencies obtained by the substitute-stringer approach" (p. 1).

Report presenting an investigation to determine separately the aerodynamic characteristics of a Douglas Aircraft Company store and a semispan delta-wing-fuselage configuration in the presence of one another. The store was located at the 50-percent-semispan station with the store nose both ahead of and behind the wing leading edge for two longitudinal and three vertical positions.

None

A preliminary design study, Phase I of the ALPR project, has been made in accordance with the Army Reactors Branch specifications for a nuclear "package" power plant with a 200-260-kw electric and 400 kw heating capacity. The plant is to be installed at the Idaho Reactor Testing Station as a prototype for remote arctic installations. The "conventional" power plant as well as the exterior reactor components are described in the accompanying report and cost estimate by Pioneer Service and Engineering Company, Architect-Engineers for the project."Nuclear" components of the reactor are designed by Argonne National Laboratory as described in the present report.

A preliminary design study, Phase I of the ALPR . project, has been made in accordance with the Army Reactors Branch specifications for a nuclear ''package'' power plant with a 200 to 260 kw electric and 400 kw heating capacity..The plant is to be installed at the Idaho Reactor Testing Station as a prototype for remote arctic installations. The ''conventiornl'' power plant as well as the exterior reactor components are described, and cost estimates are given. ''Nuclear'' components of the reactor are described. (auth)

From Introduction: "In this study wide variations in many of the pertinent aerodynamic were investigated at subsonic and supersonic speeds. The effects of large changes in principal axis inclination and mass distribution are also included. The primary purpose of this paper is to summarize the information obtained from the analog calculations and to compare the results with the trends predicted from a slightly modified version of reference 2."

From Introduction: "The time-averaged flows are considerably simpler to deal with theoretically than are the instantaneous flows, and the results of several theoretical analyses are available (refs. 2 to 6, for example). Several previous experimental investigations (see ref. 7 for a bibliography) have provided some qualitative information on the subject by the use of smoke in flight and in wind tunnels. However, quantitative measurements (refs. 8 to 10) are extremely scarce and, in general, are inadequate either to define the nature of the flow or to check the accuracy of the theoretical calculations."

From Introduction: "In this paper are presented descriptions of the camera setups and associated equipment, the equations and methods used in determining the model attitudes and motions from the film, and time-history curves of the variables of the spin and recovery investigated. Discussions of the nature of the spin and recovery obtained and of factors ostensibly affecting these motions are included."

Report presenting analytical estimates of the thrust, efficiency, drag, and weight of the air-turborocket engine. The effects of changes in the engine components on design and off-design performance are emphasized. Results regarding the performance, effect of design parameters, effect of subsonic cruising Mach number, geometry variations, engine weight estimates, and comparison with turbojet engines are provided.

From Introduction: "The use of automatic controls to reduce the tendency for rolling divergence has been investigated in references 2 and 3. These studies have considered the effect of artificial changes in certain stability derivatives on the rolling divergence, and have shown that increased damping in pitch may be quite effective in reducing the divergent tendency. In the present report, a different type of automatic control is investigated."

From Introduction: "This report presents the cooling-air requirements of a "paper" air-cooled turbojet engine operating over a wide range of flight Mach numbers and altitudes. The results are presented for a two-stage-turbine turbo-jet engine having a turbine-inlet temperature of 2500^o R and operating at sea-level static conditions and flight Mach numbers from 0.90 to 2.5 and flight altitudes from 40,000 to 70,000 feet. In addition, the effect of decreasing the blade-inlet cooling-air temperature on the required coolant-flow ratio is presented."

From Introduction: "The purpose of the present paper is to present summary of the information gleaned from various transonic-bump investigations of wing and wing-fuselage configurations at two representative tail heights and to compare these results with theoretical estimations made in subsonic and supersonic Mach number range."

The experimental evaluation of low (10⁻⁸ in/in/hr) creep rates are costly and time consuming. Thus, in answer to a request from the design group, the creep data on Zircaloy-2 obtained at Battelle Memorial Institute is extrapolated into the low creep rate range. Because the methods of extrapolation have not been evaluated at very low creep rates on Zircaloy, two different methods are used to analyze the creep data. The methods of extrapolation are given so that future analyses can be carried out by the design group or by other sections interested in predicting creep rates which have not been experimentally determined.

From Introduction: "The purpose of this report is to further analyze the turbine performance results of reference 1 with the objective of isolating the contribution of the cooling air to the turbine performance and establishing some systematic relation between these cooling-air effects and the turbine operational parameters."

This report talks about the ANCO Progress Report for month of April, 1956

This report addresses the progress report of ANP chemistry for February and March 1956.

This report addresses the analyses for fission-product antimony-125 made on samples of selected Thorex streams. The results are summarized in Table I

This report talks about APPR Meeting Held at Oak Ridge National Laboratory on April 3, 4, and 5.

From page 2: "This article first describes the Bevatron [particle accelerator] and its operation, and then discusses a portion of the research program. The principles of the machine and its early history were given in "The Bevatron," by Lloyd Smith, Scientific American, February 1951."

A sprawling group of buildings on an impressive campus site in the Berkeley hills provides the home of the Radiation Laboratory of the University of California. A succession of large accelerators has been built there, the latest of which is the Bevatron. It is the largest and highest-energy accelerator in operation at the present time. It was built and is operated under contract with the United States Atomic Energy Commission. It is of the type known as a proton synchrotron, of which there are two others in operation, one at the University of Birmingham, England, whose energy is 1 Bev (billion electron volts), and another at the Brookhaven National Laboratory, known as the Cosmotron, which operates at 3 Bev. The Bevatron accelerates protons (stripped nuclei of hydrogen atoms) to an energy of 6.2 Bev. The design was started in 1947 under the direction of Professor E. O. Lawrence, and although it was the product of collaboration of a large group of physicists and engineers, the original conception was due to William Brobeck who also contributed more than any other individual. A working quarter-scale model was built and operated in 1948 and 1949 to verify the correctness of the design concept. …

Much of the shielding work carried out with the Bulk Shielding Reactor (BSR) has yielded data of particular interest for the design of swimming pool type reactors, However, it is often difficult for a reactor designer to locate such data since it may be recorded in a report primarily concerned with shielding problems. Therefore, this memorandum presents a bibliography of reports from the Bulk Shielding Facility arranged according to the application of data to the various aspects of reactor design.

Progress report of the Oak Ridge National Laboratory Biology Division providing updates on various projects, experiments, and other work. This report includes a summary of scholarly output from the division and departmental activities in cytology and genetics, mammalian genetics and development, microbial protection and recovery, mammalian recovery, pathology and physiology, general physiology, biochemistry, enzymology and photosynthesis, microbiology, plant biochemistry, and biophysics.

None