Abstract: A portable assembly for handling and shipping OMRE fuel elements is described and details of its operation are given. Problems of heat transfer and radiation shielding are discussed, and detailed analysis are presented.

Abstract: The Sodium Reactor Experiment Mark II Fuel Handling Machine has been modified to ensure fuel and gas containment during core III operation. A new fuel control system has been designed for the fuel handling machine.

None

"An experiment to determine the effect of reactor irradiation on the thermal conductivity of uranium-impregnated graphite at elevated temperatures as described. The results show a decrease in the thermal conductivity saturating at [approximately] 60 percent at a temperature of 700 degrees C; at [approximately] 50 percent at a temperature of 1000 degrees C; and at [approximately] 25 percent at a temperature of 1300 degrees C. It was found that after irradiation at a given temperature, exposure at a higher temperature resulted in an increase in the thermal conductivity. The converse was also observed. Within the precision of measurement there was no difference in effed between temperature changes produced by varying the fission rate in the samples and changes produced by varying the power in an external heater."

Abstract: FAIM is a general multigroup, one-dimensional diffusion equation code programmed in FORTRAN language for the IBM 7090 computer.

Abstract: The results indicated that increased reliability can be obtained by using thermocouples made with insulation of increased density and/or a low thermal expansion sheath.

Introduction: QUICKIE is a computer program designed to solve the multigroup neutron slowing down and thermalization equations without consideration of spatial dimensions.

"Continued progress has been made with the high temperature decontamination processes for irradiated uranium fuel. The fused salt treatment of molten uranium has been extended to UCl3. Plutonium and rare earths were extracted into the UCl3 phase. Direct plutonium distillation from molten irradiated uranium has been scaled up to the hundred gram scale. Solid scavenging experiments using uranium oxide, uranium carbide, and uranium nitride in contact with molten uranium have indicated fission product removal. A scaled-up investigation of the separation and recover of uranium from an SIR type ceramic fuel using the volatile fluoride process has indicated the feasibility of this separation method. The effect of irradiation on the decomposition of BrF3 has been further studies in experiments using the NAA statitron.'

"A study has been made of methods to prepare a fluid containing 1 gram of thorium per milliliter. The methods considered were solutions of thorium salts, suspensions of dry solids in water, and collodial suspensions. Thorium oxide, oxalate, and fluoride were tried in conjunction with one or more surface actants, but it was not possible to attain the required thorium concentration. Thorium hydrosol, produced by peptization of thorium hydroxide and subsequent electrodialysis, gave the necessary concentration of 1 gram per milliliter. A solution of 0.5 gram per milliliter was found to be stable to electron irradiation and did not flocculate upon shaking or standing. Selected surface actans which might be used as protective colloids were found to be unstable to electron irradiation.