A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

This report includes a table listing, by state, the: Number of bids, or offers, received; Total acres offered for enrollment; Acres offered that are currently enrolled in the CRP; Acres offered are not currently enrolled in the CRP; Acres on which contracts expire on September 30, 1997; Percentage of acres currently in the program that were offered for reenrollment; and Percentage of acres offered that are not currently enrolled in the CRP.

Dr. Martha Krebs, Director, Office of Energy Research at the US Department of Energy (DOE), wrote to the Fusion Energy Sciences Advisory Committee (FESAC), in letters dated September 23 and November 6, 1996, requesting that FESAC review the International Thermonuclear Experimental Reactor (ITER) Detailed Design Report (DDR) and provide its view of the adequacy of the DDR as part of the basis for the United States decision to enter negotiations with the other interested Parties regarding the terms and conditions for an agreement for the construction, operations, exploitation and decommissioning of ITER. The letter from Dr. Krebs, referred to as the Charge Letter, provided context for the review and a set of questions of specific interest.

In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 Plant. As a condition of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed to demonstrate that the effluent limitations established for the Y-12 Plant protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Lear et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the complex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Plant on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Plant discharges on the aquatic integrity …

A reducing grout has been developed for closing high level waste tanks at the Savannah River Site in Aiken, South Carolina. The grout has a low redox potential, which minimizes the mobility of Sr{sup 90}, the radionuclide with the highest dose potential after closure. The grout also has a high pH which reduces the solubility of the plutonium isotopes. The grout has a high compressive strength and low permeability, which enhances its ability to limit the migration of contaminants after closure. The grout was designed and tested by Construction Technology Laboratories, Inc. Placement methods were developed by the Savannah River Site personnel.

The purpose of the CEMOC program was to support U.S. industry needs in fabricating precision components, from difficult to machine materials, while maintaining and enhancing the precision manufacturing skills of the Oak Ridge Complex. Oak Ridge and partner company personnel worked in a team relationship wherein each contributed equally to the success of the program. In general, Oak Ridge contributed a wider range of expertise to a given task while the companies provided operations-specific equipment and shop-floor services. Process control technologies, machining procedures and parameters, and coolant-related environmental tasks were the primary focus areas. The companies were very pleased with the results of the CRADAs and are planning on continuing the relationships. Finish machining operations contribute the majority of the costs associated with fabricating high quality ceramic products. These components are typically used in harsh environments such as diesel engines, defense machinery, and automotive components. The required finishing operations involve a variety of technologies including process controls, machine coolants, product certification, etc. and are not limited only to component grinding methods. The broad range of manufacturing problem solving expertise available in Oak Ridge provided resources that were far beyond what are typically available to the CRADA partners. These partners contributed …

Supernova 1987A focused attention on the critical role of hydrodynamic instabilities in the evolution of supernovae. To test the modeling of these instabilities we are developing laboratory experiments of hydrodynamic mixing under conditions relevant to supernovae. The target consists of two-layer planar package composed on 85 micron Cu backed by 500 micron CH2, having a single mode sinusoidal perturbation at the interface, with gamma = 200 microns, nuo + 20 microns. The Nova laser is used to generate a 10-15 Mbar (10- 15x10{sup 12} dynes/cm2) shock at the interface, which triggers perturbation growth, due to the Richtmyer-Meshov instability followed by the Raleigh-Taylor instability as the interface decelerates. This resembles the hydrodynamics of the He-H interface of a Type II supernova at the intermediate times, up to a few x10{sup 3} s. The experiment is modeled using the hydrodynamic codes HYADES and CALE, and the supernova code PROMETHEUS. We are designing experiments to test the differences in the growth of 2D vs 3D single mode perturbations; such differences may help explain the high observed velocities of radioactive core material in SN1987A. Results of the experiments and simulations are presented.

The overall objective of this ERIP program was to make substantial progress in further developing a process for electrolytic regeneration of acid cupric chloride etchant - a process which was initially demonstrated in in-house studies and EPA Phase I and Phase II SBIRs. Specific objectives of the work were: (1) to define optimum system operating conditions by conducting a systematic study of process parameters, (2) to develop or find a superior electrolyic cell separator material, (3) to determine an optimum activation procedure for the flow-through carbon/graphite felt electrodes which are so critical to process performance, (4) to demonstrate - on the pre-prototype scale - electrolytic compensation for oxygen ingress - which causes etchant solution growth, and (5) to begin engineering design work on a prototype-scale regeneration unit. Parametric studies looked at the effect that key plating parameters have on copper deposit quality. Parameters tested included (a) velocity past the plating cathodes, (b) copper concentration in the catholyte solution from which the copper is being plated, (c) plating current density, and (d) catholyte cupric ion concentration. The most significant effects were obtained for velocity changes. The work showed that catholyte velocities above 0.5 ft/sec were needed to get adequate plating at …

The purpose of this document is to provide a readily available source of the technical reports needed for the development of the safety documentation provided for the waste retrieval sluicing system (WRSS), designed to remove the radioactive and chemical sludge from tank 241-C-106, and transport that material to double-shell tank 241-AY-102 via a new, temporary, shielded, encased transfer line.

The purpose of this document is to describe the conceptual business process requirements of a single, site-wide, consolidated, automated, deficiency management tracking, trending, and reporting system. This description will be used as the basis for the determination of the automated system acquisition strategy including the further definition of specific requirements, a ''make or buy'' determination and the development of specific software design details.

None