This report discusses various selected scientific research studies that have explores possible causes of homosexuality. Some investigations examining biological factors are described, as well as studies that consider possible environmental influences.

A new reactor system was constructed which can be used for CVD Of SiO[sub 2] layers on porous Vycor tubes. The system is suitable for the usual one-sided deposition and for alternating (or layer-by-layer) deposition whereby the silylating agent and water are passed one at a time in alternating periods. The main advantage of alternating deposition is that it allows membrane deposition using silica precursors for which the homogeneous hydrolysis is fast. As we have demonstrated in earlier work, fast homogeneous reaction interferes with membrane formation. The disadvantage of alternating deposition is the longer time required for membrane formation. Figure 1 is a schematic of the new reactor constructed for homogeneous deposition. In each silylation period the space inside and outside of the support tube is evacuated and a small and accurately controlled amount of reactant (e.g. SiCl[sub 4]) is allowed to flow from a storage glass flask 4 into the reactor annulus by opening valve 5 for a few seconds. The silylation reaction is allowed to proceed for the desired time interval (about one minute) after which the reactor is evacuated and flow of water vapor commences by opening valve 7. After the completion of one cycle of silylation …

The objectives of this secondary oil recovery project involving the Carter sandstone in northwest Alabama are: (1) To increase the ultimate economic recovery of oil from the Carter reservoirs, thereby increasing domestic reserves and lessening US dependence on foreign oil; (2) To extensively model, test, and monitor the reservoirs so their management is optimized; and (3) To assimilate and transfer the information and results gathered to other US oil companies to encourage them to attempt similar projects. Start-up water injection began on 0 1/12/93 at the Central Bluff Field, and daily operations began on 01/13/93. These operations include monitoring wellhead pressures at the injector and two producers, and injection water treatment. Water injection was running 200-300 bbl/day at the end of February. Once the unit is pressured-up well testing will be performed. Unitization was approved on 03/01/93.b. For the North Fairview Field correlations and log analyses were used to determine the fluid and rock properties. A summary of these properties is included in Table 1. The results of the log analysis were used to construct the hydrocarbon pore volume map shown on Figure 1. The map was planimetered to determine original oil-in-place (OOIP) values and the hydrocarbon pore volume by …

Clean Coal Technology (CCT) implies the use of coal in an environmentally acceptable manner. Coal combustion results in the emission of oxides of nitrogen (NO[sub x]), which are precursors of both acid rainand ozone formation. The primary objective of this CCT project is to evaluate the use of Gas Reburning and Low NO[sub x] Burners (GR-LNB) for NO[sub x] emission control from a wall fired boiler. It is anticipated that, if the demonstration is successful, the GR-LNB technology could become commercialized during the 1990's and will be capable of (1) achieving significant reduction in the emissions of nitrogen oxides and sulfur dioxide (another acid rain precursor) from existing facilities to minimize environmental impacts such as transboundary and interstate pollution and/or (2) providing for future energy needs in an environmentally acceptable manner. Low NO[sub x] burners are designed to delay the mixing of the coal fuel with combustion air to minimize the NO[sub x] formation. Typically, one may obtain up to 50% reduction in NO[sub x] emissions through the use of LNB. For LNB applications, the technology is developed and a number of LNB designs are commercially available. With GR, about 80--85 percent of the coal fuel is fired in the …

The objective of this project is to evaluate and demonstrate a cost effective emission control technology for acid rain precursors, oxides of nitrogen (NO[sub x]) and sulfur (SO[sub x])on two coal fired utility boilers in Illinois. The units selected are representative of pre-NSPS design practices: tangential and cyclone fired. The specific objectives are to demonstrate reductions of 60 percent in NO[sub x] and 50 percent in SO[sub x] emissions, by a combination of two developed technologies, gas reburning (GR) and sorbent injection (SI). With GR, about 80--85 percent of the coal fuel is fired in the primary combustion zone. The balance of the fuel is added downstream as natural gas to create a slightly fuel rich environment in which NO[sub x]is converted to N[sub 2]. The combustion process is completed by overfire air addition. SO[sub x] emissions are reduced by injecting dry sorbents (usually calcium based) into the upper furnace. The sorbents trap SO[sub x] as solid sulfates that are collected in the particulate control device. This project is conducted in three phases at each site: (1) Design and Permitting, (2) Construction and Startup, and (3) Operation, Data Collection, Reporting and Disposition. Technology transfer to industry is accomplished through the …

The SNODOG Glossary is used by the DOE-supported life-span beagle studies to describe medical observations in a standardized format. It is an adaptation of the human medical glossary, SNOMED, which lists 107,165 terms. Each of the five laboratories, Argonne National Laboratory, the Inhalation Toxicology Research Institute, the Pacific Northwest Laboratory, the University of California at Davis, and the University of Utah, has selected an appropriate subset from the published SNOMED glossary and added beagle and research-specific terms. The National Radiobiology Archives is the coordinator of these enhancements, and periodically distributes SNODOG to the respective laboratories. Information donated by Colorado State University and Oak Ridge National Laboratory has been related to SNODOG and is available in a standardized format. This document is designed for the database manager and the scientist who will be managing or coding medical observations. It is also designed for the scientist analyzing coded information. The document includes: an overview of the NRA and the SNODOG glossary, a discussion of hardware requirements, a review of the SNODOG code structure and printed lists of the 4,770 terms which have been used at least once. Instructions for obtaining electronic copies of the glossary and for nominating additional terms are provided. …

The objectives of this secondary oil recovery project involving the Carter sandstone in northwest Alabama are: (1) To increase the ultimate economic recovery of oil from the Carter reservoirs, thereby increasing domestic reserves and lessening US dependence on foreign oil; (2) To extensively model, test, and monitor the reservoirs so their management is optimized; and (3) To assimilate and transfer the information and results gathered to other US oil companies to encourage them to attempt similar projects. Start-up water injection began on 0 1/12/93 at the Central Bluff Field, and daily operations began on 01/13/93. These operations include monitoring wellhead pressures at the injector and two producers, and injection water treatment. Water injection was running 200-300 bbl/day at the end of February. Once the unit is pressured-up well testing will be performed. Unitization was approved on 03/01/93.b. For the North Fairview Field correlations and log analyses were used to determine the fluid and rock properties. A summary of these properties is included in Table 1. The results of the log analysis were used to construct the hydrocarbon pore volume map shown on Figure 1. The map was planimetered to determine original oil-in-place (OOIP) values and the hydrocarbon pore volume by …

The use of motor current signature analysis (CSA) has been established as a useful method for periodic monitoring of electrically driven equipment. CSA is, moreover, especially well suited as the basis for a dedicated continuous monitoring system in an industrial setting. This paper presents just such an application that has been developed and installed in the US government uranium enrichment plant at Portsmouth, Ohio. The system, which is designed to detect specific axial-flow compressor problems in 1700-hp gaseous diffusion compressors, is described in detail along with an explanation of detected fault conditions and the required signal manipulations. Amplitude demodulation and subsequent digital processing of motor signals sensed from area control room ammeter loops are used to accomplish the desired monitoring task. Using modified off-the-shelf multiplexing equipment, a 386-type personal computer, and special digital signal processing hardware, the system is presently configured to monitor ten compressors but is expandable to monitor more than 100. Within its first few days of operation in September 1992, the system detected a compressor problem that, when corrected, resulted in a cost avoidance of about $150,000, which more than paid for the hardware and software development costs. Finally, plans to expand system coverage in the coming …

In developing the new Ohio University procedure the thermodynamic limitations of the reactions for removal of both pyritic and organic sulfur from coal at 400--600{degrees}C were studied using copper as a very strong H{sub 2}S-acceptor. Copper serves as a catalyst for ethanol dehydrogenation to form nascent hydrogen. Copper also serves as a scavenger to form copper sulfide from the hydrogen sulfide evolved during the reaction. Copper sulfide in turn serves as a catalyst for organic sulfur hydrodesulfurization reactions. If the coal to be desulfurized contains pyrite (FeS{sub 2}) or FeS, the copper scavenger effect reduces any back reaction of hydrogen sulfide with the iron and increases the removal of sulfur from the carbonaceous material. The desired effect of using copper can be achieved by using copper or copper containing alloys as materials of construction or as liners for a regenerable reactor. During the time period that Ohio Coal Development Office supported this work, small scale (560 grams) laboratory experiments with coals containing about 3.5% sulfur have achieved up to 90% desulfurization at temperatures of 500{degrees}C when using a copper reactor. Results from the autoclave experiments have identified the nature of the chemical reactions taking place. Because the process removes both …

The objective of this project is to evaluate and demonstrate a cost effective emission control technology for acid rain precursors, oxides of nitrogen (NO{sub x}) and sulfur (SO{sub x})on two coal fired utility boilers in Illinois. The units selected are representative of pre-NSPS design practices: tangential and cyclone fired. The specific objectives are to demonstrate reductions of 60 percent in NO{sub x} and 50 percent in SO{sub x} emissions, by a combination of two developed technologies, gas reburning (GR) and sorbent injection (SI). With GR, about 80--85 percent of the coal fuel is fired in the primary combustion zone. The balance of the fuel is added downstream as natural gas to create a slightly fuel rich environment in which NO{sub x}is converted to N{sub 2}. The combustion process is completed by overfire air addition. SO{sub x} emissions are reduced by injecting dry sorbents (usually calcium based) into the upper furnace. The sorbents trap SO{sub x} as solid sulfates that are collected in the particulate control device. This project is conducted in three phases at each site: (1) Design and Permitting, (2) Construction and Startup, and (3) Operation, Data Collection, Reporting and Disposition. Technology transfer to industry is accomplished through the …

A new reactor system was constructed which can be used for CVD Of SiO{sub 2} layers on porous Vycor tubes. The system is suitable for the usual one-sided deposition and for alternating (or layer-by-layer) deposition whereby the silylating agent and water are passed one at a time in alternating periods. The main advantage of alternating deposition is that it allows membrane deposition using silica precursors for which the homogeneous hydrolysis is fast. As we have demonstrated in earlier work, fast homogeneous reaction interferes with membrane formation. The disadvantage of alternating deposition is the longer time required for membrane formation. Figure 1 is a schematic of the new reactor constructed for homogeneous deposition. In each silylation period the space inside and outside of the support tube is evacuated and a small and accurately controlled amount of reactant (e.g. SiCl{sub 4}) is allowed to flow from a storage glass flask 4 into the reactor annulus by opening valve 5 for a few seconds. The silylation reaction is allowed to proceed for the desired time interval (about one minute) after which the reactor is evacuated and flow of water vapor commences by opening valve 7. After the completion of one cycle of silylation …

Clean Coal Technology (CCT) implies the use of coal in an environmentally acceptable manner. Coal combustion results in the emission of oxides of nitrogen (NO{sub x}), which are precursors of both acid rainand ozone formation. The primary objective of this CCT project is to evaluate the use of Gas Reburning and Low NO{sub x} Burners (GR-LNB) for NO{sub x} emission control from a wall fired boiler. It is anticipated that, if the demonstration is successful, the GR-LNB technology could become commercialized during the 1990`s and will be capable of (1) achieving significant reduction in the emissions of nitrogen oxides and sulfur dioxide (another acid rain precursor) from existing facilities to minimize environmental impacts such as transboundary and interstate pollution and/or (2) providing for future energy needs in an environmentally acceptable manner. Low NO{sub x} burners are designed to delay the mixing of the coal fuel with combustion air to minimize the NO{sub x} formation. Typically, one may obtain up to 50% reduction in NO{sub x} emissions through the use of LNB. For LNB applications, the technology is developed and a number of LNB designs are commercially available. With GR, about 80--85 percent of the coal fuel is fired in the …

The SNODOG Glossary is used by the DOE-supported life-span beagle studies to describe medical observations in a standardized format. It is an adaptation of the human medical glossary, SNOMED, which lists 107,165 terms. Each of the five laboratories, Argonne National Laboratory, the Inhalation Toxicology Research Institute, the Pacific Northwest Laboratory, the University of California at Davis, and the University of Utah, has selected an appropriate subset from the published SNOMED glossary and added beagle and research-specific terms. The National Radiobiology Archives is the coordinator of these enhancements, and periodically distributes SNODOG to the respective laboratories. Information donated by Colorado State University and Oak Ridge National Laboratory has been related to SNODOG and is available in a standardized format. This document is designed for the database manager and the scientist who will be managing or coding medical observations. It is also designed for the scientist analyzing coded information. The document includes: an overview of the NRA and the SNODOG glossary, a discussion of hardware requirements, a review of the SNODOG code structure and printed lists of the 4,770 terms which have been used at least once. Instructions for obtaining electronic copies of the glossary and for nominating additional terms are provided. …

This Safety Information Document (SID) provides a description and analysis of operations for the Hazardous Waste/Mixed Waste Disposal Facility Treatment Building (the Treatment Building). The Treatment Building has been classified as a moderate hazard facility, and the level of analysis performed and the methodology used are based on that classification. Preliminary design of the Treatment Building has identified the need for two separate buildings for waste treatment processes. The term Treatment Building applies to all these facilities. The evaluation of safety for the Treatment Building is accomplished in part by the identification of hazards associated with the facility and the analysis of the facility`s response to postulated events involving those hazards. The events are analyzed in terms of the facility features that minimize the causes of such events, the quantitative determination of the consequences, and the ability of the facility to cope with each event should it occur. The SID presents the methodology, assumptions, and results of the systematic evaluation of hazards associated with operation of the Treatment Building. The SID also addresses the spectrum of postulated credible events, involving those hazards, that could occur. Facility features important to safety are identified and discussed in the SID. The SID identifies …

As part of this involvement Solar intends to design and commercialize a unique gas turbine system that promises high cycle efficiencies and low exhaust emissions. This engine of approximately 12-MW will be targeted for the dispersed power markets both urban and rural. Goals of 50% thermal efficiency and 8 parts-per-million by volume (ppmv) nitrogen oxide emissions were established. Reliability, availability, and maintainability (RAM) will continue to be the most important factors in the competitive marketplace. The other major goal adopted was one of reducing the cost of power produced by 10%. This reduction is based on the cost of power (COP) associated with today`s engines that lie in the same horsepower range as that targeted in this study. An advanced cycle based on an approximation of the Ericsson Cycle was adopted after careful studies of a number of different cycles. This advanced intercooled, recuperated engine when fired at 2450{degree}F will be capable of meeting the 50% efficiency goal if the cooling air requirements do not exceed 7% of the total air flow rate. This latter qualification will probably dictate the use of ceramic parts for both the nozzle guide vanes and the turbine blades. Cooling of these parts will probably …

The effect in ambient air the tensile and fatigue behavior of an Fe{sub 3}Al, Cr type intermetallic alloy is examined as a function of test temperature. Hydrogen due to moisture in the air is found to be a major cause of embrittlement. Rates and mechanisms of observed embrittlement appear to be temperature dependent. In addition, the alloy was found to have no notch sensitivity.