A series of drift-surface and magnetic-field calculations has been carried out to try to estimate the accuracy with which the elements of the TMX magnet set must be magnetically aligned. The results of these calculations, for 500 G at the solenoidal center, are summarized.

A crack-free silicon ingot has been cast in a graded, semiconductor purity silica crucible. More than 90% single crystallinity has been achieved in 2.5 kg cast ingots. The impurities on the surface of the melt have been reduced with the use of a rapid heat-up cycle and absence of graphite retainers. Solar cells fabricated out of HEM cast material have shown conversion efficiency up to 14% under AM1 Xenon source illumination. Considerable progress has been achieved in casting square cross-section ingots. The growth in the corners has been obtained but the problem area is in fabricating a custom-made graded crucible. Kerf loss was reduced to 6.2 mil, 0.155 mm in slicing 4 cm x 4 cm cross-section with 100% yield. The abrasive life of plated impregnated blades was increased by hardening the electroless nickel layer. In an effort to prevent diamond pull-out and thereby improve the abrasive life, the plated layer was increased from 0.3 mil, 7.5 ..mu..m to 0.5 mil, 12.5 ..mu..m. The extra thickness buried the diamonds. A thinner copper sheath for impregnation and a thicker nickel coating to prevent diamond pull-out is expected to improve the abrasive life. Higher feed forces increased the cutting rates but resulted …

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.