This report describes progress in testing non-aqueous extraction methods for leaching Western ores of uranium and vanadium.

Report discussing a method of rear face monitoring by television as a form of visual contact and communication between Hanford Works crews. A conclusion and recommendation of the method is given as well as an explanation of necessary materials.

Abstract: Cadmium ratios for very thin (neutron and beta-wise) foils of thorium, gold, vanadium and indium have been measured in the glory hole of the WBNS. These cadmium ratios, together with the known thermal cross sections and a given calculated resonance integral for gold, were used to evaluare the resonance integrals of thorium, vanadium, and indium.

Report discussing an investigation aimed at building information regarding the titanium-uranium system in the uranium-rich region.

Abstract: "A method is described for determining moisture on uranium and uranium oxides. This method should also be applicable to solid samples which, when heated, do not decompose to form water or liberate a substance which will react with Fischer's reagent. The method should be especially applicable to samples which are insoluble in alcohol or Karl Fischer reagent under normal titration conditions, or which will themselves react with the reagent. The amount of moisture on uranium and uranium oxide was found to be 0.02% except when the oxide was found to be 0.02% except when the oxide source was uranyl sulfate. In this case, the moisture content was found to be 0.1%. Modifications of the procedure and apparatus are presented for improving the accuracy and shortening the time necessary for the determination."

Abstract: "The heat of solution of thorium sesquisulfide was determined in 6.000 molar HCl at 25 C to ascertain the stability of the thorium (III) halides. The molal heat of formation of Th2S3 from rhombic sulfur and crystalline thorium is calculated as 258.6 kcal."

Report discussing a study aimed at learning about cell division and the effects of radiation alpha radiation on the process of cell division. This was done by correlating changes in the biochemical state of cells and the inhibition of cell division. Materials and methods are included as well as experimental results and data.

Report discussing the progress made on various research projects by the staff responsible for the Materials Testing Reactor at Phillips Petroleum Company during the first quarter of 1953.

This is a preliminary report on a multigroup's analysis on the IBM 604, a programmable Electronic Calculating Punch, as part of the course work W31-Eng. 52.

This report describes a micro technique for the preparation of intermetallic polonium compounds.

Report discussing measurements of thermal conductivity and heat capacity for uranium-chromium and uranium-iron eutectic alloys at room temperature. The resulting values were intended for use in design calculations until more accurate data at other temperatures was obtained.

This report describes the specifications, materials and the sequence of operations used to found and fabricate the first charge of enriched uranium fuel in the Experimental Breeder Reactor.

Experiments are described in which the pile-induced changes in electrical resistivity and elastic modulus of graphite were investigated as functions of the sample temperature during bombardment and the amount of bombardment. The data are for relatively low bombardment times (up to ca. 20 L-units) and temperatures (up to 340*C) and are not sufficiently extensive to permit unequivocal conclusions.

The following documents are quarterly progress reports recorded in the chemistry division of the University of California's radiation laboratory.

The spontaneous fission rate of plutonium-240 has been redetermined and found to be 1.51 X 106 events/g/hr.

Field tests were conducted to measure short-period pollutant concentrations at several stack heights during conditions of marked atmospheric instability and low wind speeds. The source was a mechanical smoke generator located at the 185-ft level of a tower.

A manipulator designed to support an irradiated slug at the bottom of the viewing basin, so that an operator could view it through a binocular telescope and be able to see all surfaces, was designed. Hydraulic power, using water, operates the manipulator and gears.

The corrosion resistance of four types of austenitic stainless steels to Purex process first and second acid concentrator bottoms was determined. Although the compositions of the two solutions were very similar, tests in simulated solutions of both compositions were conducted to strengthen the basis for the conclusions which were to be made.

Measurements were taken to provide experimental evidence for determining the feasibility of a proposed method for converting Pu240 to 241 by exposing shielded plutonium to selectively transmitted pile neutrons.

The perturbation theory for material replacement experiments is given through second order thus permitting corrections for sample size. Computed flux and adjoint distribution functions are tabulated for the Lady Godiva assembly enabling the observed danger coefficients for U-238 and U-235 to be compared with corresponding predicted values. Consistency of this data is checked by its use in three independent combinations each yielding for the effective fraction of delayed neutrons from fast fission the value L841=0.0068 * 0.0002. Estimation of the reactivity contributions associated with inelastic scattering give the following connection between central danger coefficient ratios and [(%1>~-q~ ratios for the Topsy assembly (oralloy core + 81/2”tuballoy reflector), AK$U-233) A&(U-235) AKO(PU-239) AKJu-235) = 1.71= 1.93 = 1.78. Evaluation of transport cross sections by means of replacement measurements in Godiva is illustrated for the several elements carbon, copper, and gold, the values relative to ~!&(OY) = 1 being ~fi(c) = ().43 f 0.02, ~(CU) = 6.5!5 * 0.02} ~ti(Au) = 0.91 f 0.02.

A device has been designed which will support small spheres and cylinders in a vacuum system during a plating operation. While supporting the object to be plated, the device automatically shifts the position of the supports so that the coating is evenly distributed. This report describes the mechanism by which this motion is achieved.

Absolute differential cross sections for the reaction p + p - w+ + d were obtained by detecting meson-deuteron coincidences produced by passing the 340-Mev external proton beam of the Berkeley synchro-cyclotron through a liquid hydrogen target.

The purpose of this letter is to point out certain discrepancies between previous work on the decay of Rb82 (6.3 hour, B+, K-capture) and studies made recently at the University of California Radiation Laboratory.

In the past year, exploratory data have been taken to determine the relative solubilities of hydrogen and deuterium in various solvents in the vicinity of room temperature and atmospheric pressure. This investigation is one phase of a program to determine the feasibility of separating deuterium from hydrogen by means of rectified absorption.