Monthly magazine discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

Monthly report documenting orders, opinions, and other legal statements issued by the Office of the Attorney General in Texas.

Monthly magazine discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

Monthly magazine discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

Monthly magazine discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

Monthly magazine discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

Technical report with short reports from the (A) Crystal Structure Section ; (B) Mass Spectroscopy Section ; and (C) Metallurgy Section.

With discussion under way concerning power production by chain reacting piles, it becomes pertinent to consider the ration of the temperature of the hottest spot in the pile to the average exit temperature of the cooling stream. This is important because the temperature of the hottest spot in the pile is one of the limiting factors in determining the maximum power at which a pile can be operated. However, the higher the temperature of the emerging cooling stream, the more efficient can be the thermal engine operated by it. Thus the ideal situation is to have the average exit temperature of the cooling stream as near as possible to the hottest temperature of the hottest spot in the pile.

Abstract. Some idealized calculations (CP-807) relating to the design of heat exchangers for minimum holdup of pile liquid are presented in compact form to facilitate quick estimates. Their use is illustrated by application to a falling film type exchanger.

Technical report with short reports from the (1) Physics Section I; (2) Physics Section II ; and (3) Physics Section III.

The temperature coefficient of eta has been measured with the thermal column of the Argonne pile using uranium foils of different isotopic ratios. The temperature change was effected by filtering neutrons through silver. The measured fractional change per degree centigrade is [formula].

Some methods for calculating the k requirements of various shaped piles are indicated, with particular reference to the shape of the tank in the homogeneous plant.

Six structural materials (aluminum 2S, aluminum 72S, copper, iron, steel, lead and bismuth) were irradiated for about 100 kilowatt hours in the center of the Argonne pile. The alpha and gamma decays were then followed for 130 days on Geiger counters and are presented here graphically as number of rays per minute per gram per kilowatt hour vs. time of decay. A quantitative interpretation of the gamma-ray decay curves gave fair agreement with the chemical analysis of impurities found in the materials.

The multiplication constant and optimal concentration of a slurry pile is recalculated on the basis of Mitchell's recent experiments on resonance absorption. The smallest chain reacting unit contains 45 to 55 m3 of D2O.

The temperature coefficient is calculated for various lattice arrangements, taking into account the variation of [formula], suggested by Fermi. Four contributions are included: leakage, levelling of the dip in thermal neutron density in the lump, resonance absorption, and hardening of the neutrons as they penetrate a metal lump. The departure of neutron temperature from lattice temperature decreases the total coefficient. Values are given for 3 typical piles; in general, the larger the uranium elements, the less stable the pile. A rod lattice tends to be more stable. A pile with metal lumps over 50 lbs. will be unstable.

The average energies of neutrons emitted from a graphite column at 22 degrees C were compared by measurement of the cross section of boron for neutrons which are stopped by cadmium. At a distance from the neutron source great enough to insure that the neutrons were in thermal equilibrium the average energies of the emerging neutrons were found to be proportional to the temperature within the limits of the experimental error. A measurement made with boron absorbers which had been thus standardized in the graphite column indicated neutrons emerging from the chain reacting pile to have an average temperature approximate 60 +- 50 degrees above that of thermal neutrons emerging from the graphite column at 22 degrees C. Such a measurement made inside the chain reacting pile indicated the average temperature of neutrons therein to be about 65 degrees +- 15 degrees above the average temperature of neutrons in the graphite column.

The multiplication factor and minimum pile size for a multiplying pile using UO2 powder of density 1 have been computed. It appears that a k of 1.0177 is possible for a volume ration of V/V001=3.33.

Abstract. In the first section of this technical report a new method of extracting uranium from thorium nitrate solution is discussed. This method consists of extracting an aqueous solution of thorium nitrate, nitric acid, sodium sulphate, and potassium thiocyanate with hexone. By this procedure, using an equal volume of hexone it is possible to extract 83 percent of the uranium while only 0.3 percent of the thorium is extracted. other experiments show that even greater separations are possible. In the second section of this report the use of antipyrine in solvent extraction procedures is discussed. Experiments are described in which 90 percent of the uranium is extracted while the thorium is extracted to the order of 3 to 5 percent.

Technical report containing short articles on (1) Determination of physical constants for U233; (2) Determination of decay chain of U233; (3) Extraction of U233; (4) Extracting solvents for uranium; (5) Factors affecting the extraction uranium and thorium by organic solvents, especially ether; and (6) Analysis of ore samples for protoactinium.

Technical report with short reports covering (1) Effect of radiation on water and aqueous systems; (2) Effect of neutrons on graphite; (3) Effect of radiation on solid compounds; and (4) Scattering, stopping-power, ion-pair production, etc.

Technical Report: A generalized review of the chemical problems and researches related principally to the heavy water homogeneous pile is presented herewith. The report covers researches performed principally by the Columbia Group who initiated the study. This report contains a chronological outline of the development, a discussion of some special topics whose significance is paramount in any slurry pile discussion, and finally an outline of important research problems remaining, roughly graded in order of their importance. No attempt has been made to be either complete or detailed in the discussion. The emphasis has been principally on furnishing a broad guide to those who may t some future date take up this work.

Technical report describing a gasometrical method for the determination of H2 in extruded U rods.

Technical report summarizing our knowledge of the chemical effects of ionizing radiation upon water and upon aqueous solutions of inorganic compounds. The types of radiation considered are beta rays, gamma and X rays, and heavy particles, notably neutrons, deuterons, alpha rays and fission recoils.

Abstract. A review of all work on uranium hydride published in the CC, CT, CN and CE reports to January 1, 1944, is presented. Some additional information not yet published has been included, so this report includes all data known from the above sources and at Ames to the above date. This report supersedes all previous report on uranium hydride coming out of the Ames laboratory.