The 20,000 gls. Liquid Argon dewar stores up to 15,000 gls. of high purity (<1.0 ppm O{sub 2}, 0.999995) LAr for use in the Liquid Argon calorimeters of E740, the D0 collider detector, at elevation 707-feet. The dewar provides for the total detector volume of 11,000 gls and a 4,000 gls. storage inventory. The large gas volume ({ge}5,000 gls.) serves operational needs and guards against overfill concerns. The LAr dewar functions in two modes: (1) low pressure (16 psi relief) storage, and liquid and gas transfer operations to and from the low pressure (13 psi relief) detector cryostats, and (2) high pressure (65 psi relief) liquid transfer operations to and from a delivery trailer at elevation 743-feet. The storage function is intended to be long term and nonventing. The dewar is equipped with a 40 kW LN{sub 2} condenser that operates to maintain the pressure constant in the storage mode. This service exactly parallels the NeH{sub 2} and D{sub 2} storage dewar services provided at the 15-feet bubble chamber for its operation.

The three boxes being reviewed all operate at a pressure of less than 15 psig. Since they are relieved at 13 psig, they fall outside the scopes of the ASME Pressure Vessel Code, Fermilab Engineering Standard SD-37B, and Chapter 5031 of the Fermilab Safety Manual, therefore a Pressure Vessel Engineering Note showing compliance with SD-37B is not required. In calculating the design stresses, only the largest of the three boxes, the signal board feed-thru box, was analyzed. This box had the largest spans and areas and would experience the largest pressure-related forces. The thinnest walls of each box were found to be in the top plates and they were also the side of the box which exposed the largest amount of area to internal pressure. The signal board feed-thru box top plate had at least twice the pressure area than either the instrumentation or hi-voltage boxes' top plates. This large disparity overshadows the slight difference in top plate thicknesses between the three boxes (0.56-inch vs. 0.25-inch and 0.3125-inch, respectively). Therefore, we felt the analysis of the larger signal board feedthru box would justify the design of the smaller instrumentation and hi-voltage boxes. Appended to the end of this engineering note …

None

None

This engineering note describes how exhaust fan 6 (EF-6) and exhaust fan 7 (EF-7) are controlled and monitored. Since these two fans are a vital link in the ODH safety system, they will be monitored, controlled and periodically operated by the programmable logic controller (PLC). If there should be a fault in the ventilation system, the PLC will print a warning message to the cryo control room printer and flash a descriptive warning on the ODH/ventilation graphics page. This fault is also logged to the Xpresslink graphics alarm page and to an alarm history hard disk file. The ventilation failure is also an input to the auto dialer which will continue it's automatic sequence until acknowledged. EF-6 delivers 13000 C.F.M. and is considered emergency ventilation. EF-7 delivers 4500 C.F.M. and will run 24 hrs a day. Both ventilation fans are located in an enclosed closet in the TRD gas room. Their ductwork, both inlets and outlets run along side the pipe chase, but are separated by an airtight wall. Their combination motor control starter cabinets are located in the TRD room in plain visible sight of the fans with the closet door open. The fans have signs that state they …

None

None

None

None

During the four hours of the public meeting held by the State Department of Business and Economic Development (DBED) in Maui in November 1989, not one of the 200 persons present spoke in favor of geothermal development on the Big Island to supply power to Oahu. However, we were all sure after the meeting that the State would proceed on its course to develop the project in spite of any public concerns. This situation we find incredible considering there are many unanswered questions on a subject of paramount importance to the economic and environmental well being of all of us. Our concerns are well expressed in the editorial of The Maui News, December 10, 1989 . We wish to set the record straight with some facts from an economic, financial and utility planning viewpoint, recognizing also the potentially serious social, health and other environmental impacts.

A comprehensive theoretical study has been carried out on the flow behavior of both single and multiple phase non-Newtonian fluids in porous media. This work is divided into three parts: (1) development of numerical and analytical solutions; (2) theoretical studies of transient flow of non-Newtonian fluids in porous media; and (3) applications of well test analysis and displacement efficiency evaluation to field problems. A fully implicit, integral finite difference model has been developed for simulation of non-Newtonian and Newtonian fluid flow through porous media. Several commonly-used rheological models of power-law and Bingham plastic non-Newtonian fluids have been incorporated in the simulator. A Buckley-Leverett type analytical solution for one-dimensional, immiscible displacement involving non-Newtonian fluids in porous media has been developed. Based on this solution, a graphic approach for evaluating non-Newtonian displacement efficiency has been developed. The Buckley-Leverett-Welge theory is extended to flow problems with non-Newtonian fluids. An integral method is also presented for the study of transient flow of Bingham fluids in porous media. In addition, two well test analysis methods have been developed for analyzing pressure transient tests of power-law and Bingham fluids, respectively. Applications are included to demonstrate this new technology. The physical mechanisms involved in immiscible displacement with …

This study evaluated mark recovery data from PIT-tagged and freeze-branded river-run yearling and subyearling chinook salmon (Oncorhynchus tshawytscha), sockeye salmon (Q. nerka), and steelhead (0. mykiss) at McNary Dam in 1988. Double-marked (PIT-tagged and freeze-branded) juvenile salmonids were released within the McNary Dam collection system upstream from the PIT-tag detectors and brand sampling system. Results indicate that brands were recovered in smaller proportions than PIT tags and the variability of brand data was considerable. Most of the error associated with brands was attributable to human error inherent in brand detection and interpretation.

None

We present here the physics program planned for Hall A at CEBAF. It encompasses exclusive as well as inclusive electromagnetic measurements requiring both high precision and accuracy.The program includes measurements of the elementary form factors of the nucleon, systematic studies of the few nucleon systems (d, 3,4He), high momentum structure of nuclei, their structure at high Q^2 to look for hadronization and quark effects, spin response of nuclei via (vector-e, e'vector-p) reactions and the study of nuclear pion fields.

A comprehensive generic component failure data base has been developed for light water and liquid sodium reactor probabilistic risk assessments (PRAs) . The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) and the Centralized Reliability Data Organization (CREDO) data bases were used to generate component failure rates . Using this approach, most of the failure rates are based on actual plant data rather than existing estimates .

Monthly report of the Texas A & M University Real Estate Center on statistics, recent news, and developments related to real estate.

Methods of preparation of the copper, cobalt, and titanium catalysts were outlined. The catalyst samples were then analyzed through nuclear magnetic and nuclear quadrupole resonance.

Vapor-liquid counterflow in porous media arises in processes such as heat pipes, oil recovery and geothermal systems. Previous studies analysed these phenomena in separate contexts. This paper presents a unified description from which previous models result as limiting cases. The analysis includes capillarity, heat conduction, and Kelvin effects. The importance of each term to various processes is examined. Significantly, it is found that the critical heat flux is not constant but increases with decreasing permeability. A threshold permeability is identified below which steady states may not exist. Analogous conclusions are reached regarding liquid-dominated geothermal systems. 24 refs., 15 figs.

Control of the radial alpha particle transport by using Ion Cyclotron Range of Frequency waves is investigated in a large-aspect-ratio tokamak geometry. It is shown that spatially inhomogeneous ICRF-wave energy with properly selected frequencies and wave numbers can induce fast convective transport of alpha particles at the speed of order {upsilon}{sub alpha} {approximately} (P{sub RF}/n{sub {alpha}}{epsilon}{sub 0}) {rho}{sub p}, where P{sub RF} is the ICRF-wave power density, n{sub {alpha}} is the alpha density, {epsilon}{sub 0} is the alpha birth energy, and {rho}{sub p} is the poloidal gyroradius of alpha particles at the birth energy. Application to ITER plasmas is studied and possible antenna designs to control alpha particle flux are discussed. 8 refs., 3 figs.

Measurements leading to the calculation of the ideal-gas thermodynamic properties for 2-methylaniline and trans-(R,S)-decahydroquinoline are reported. Experimental methods included combustion calorimetry, adiabatic heat-capacity calorimetry, comparative ebulliometry, inclined-piston gauge manometry, and differential-scanning calorimetry (dsc). Entropies, enthalpies, and Gibbs energies of formation were derived for the ideal gas at selected temperatures for both compounds. Critical properties were determined for 2-methylaniline with the dsc. Measured combustion enthalpies, vapor pressures, critical properties, and ideal-gas entropies were compared with estimated and experimental literature values. 59 refs., 7 figs., 15 tabs.

It is shown that ICRF waves can induce fast convective radial transport of energetic ions in a tokamak geometry without affecting the background ion transport. Spatially inhomogeneous ICRF waves with directional parallel wave vectors are needed; otherwise, a net parallel flow of the energetic ions has to be present. 8 refs.

Supershot profiles were used to simulate plasmas in a neutral-beam driven tokamak reactor designed to achieve fusion energy production with Q {approx} 2-3. Profiles from a TFTR supershot were scaled to larger radii, density, and electron temperature. The TRANSP code was used to calculate performance of these plasmas. Examples are given of steady-state plasmas with large beam-driven bootstrap currents. The required energy transport rate is comparable to that in TFTR, but the particle transport rate must be less. The PEST code indicates that the plasmas would be MHD stable if the central q{sub {Psi}} can be controlled. 8 refs., 13 figs., 4 tabs.

The widespread application of soft x-ray laser technology is contingent on the development of small scale soft x-ray lasers that do not require large laser facilities. Progress in the development of soft x-ray lasers pumped by a Nd laser of energy 6-12J is reported below. Some aspects of data interpretation and gain measurements in such systems are discussed. 11 refs., 11 figs.

Empirical scaling expressions, reflecting the parametric dependence of the L-mode energy confinement time, have been used not only as benchmarks for tokamak operation and theories of energy transport, but for predicting the performance of proposed tokamak devices. Several scaling expressions based on data from small-and medium-sized devices have done well in predicting performance in larger devices, although great uncertainty exists in extrapolating yet farther, into the ignition regime. Several approaches exist for developing higher confidence scaling expressions. These include reducing the statistical uncertainty by identifying and filling in gaps in the present database, making use of more sophisticated statistical techniques, and developing scalings for confinement regimes within which future devices will operate. Confidence in the scaling expressions will be increased still if the expressions can be more directly tied to transport physics theory. This can be done through the use of dimensionless parameters, better describing the edge and core confinement regimes separately, and by incorporating transport models directly into the scaling expressions. 50 refs., 5 figs., 3 tabs.