Over the last decade, several computational methods have been developed and used to examine reactor flow transients caused by pump outage. The variations in system character which have been analyzed are sufficiently diverse that it appears worthwhile to compile them into a single report.

Accurate sampling of particulate in gaseous effluents is required for auditing and control of radioactive wastes released to the environment at installations generating or processing radioactive materials. Over the years a variety of sampling probe configurations, sampling velocities, lengths and sizes of sample delivery lines have been used locally to obtain these samples. Efforts to properly evaluate the validity of samples in most sampling installations have been hampered by a lack of basic knowledge of particle behavior under the various conditions imposed. Important variables about which minimal knowledge is available are those of particle impaction and retention on and re-entrainment from the walls of sampling lines. In some sampler configurations the effect of these parameters on sampling validity may be made negligible, but in lines already in place. or where long sampling lines are required, the degree to which deposition affects the sampling validity must be established. Deposition and rebuild up, then rapid release to the air stream. Research has been initiated in Hanford Laboratories Operation to provide the required data relative to deposition and retention on conduit walls and to eventually arrive at approved sampling system configurations.

Operating plant experiences in restoring to useful service failed equipment contaminated through exposures to radioactive processes is of international interest to the nuclear industry. In accordance with a request from the Hanford Operations Office of the United States Atomic Energy Commission this report of the various measures taken in rehabilitating for re-use expensive engineered equipment has been compiled by the General Electric Company. This report is a review and summary of the disposition of contaminated major processing equipment at Hanford Atomic Products Operation during 1958-1959 and a listing of 1) equipment buried, 2) equipment stored, to be buried or decontaminated, and 3) equipment decontaminated and returned to service.

This document reports the circumstances surrounding the failure of sheathed thermocouples during a test being conducted in the KAPL-120 Loop. The report is prepared to provide a record of these events and to acquaint those who use these thermocouples for testing of other applications with the difficulties that are sometimes encountered.

Thermal oxidation of graphite in flowing CO2 is being studied at 650 to 850 C, in a single-pass gas system at atmospheric pressure, by observing weight loss rates. The method is used to provide comparative data for candidate reactor graphites. The effects on oxidation rates of graphite purity, structure, coke type, graphitization temperatures and other manufacturing variables are determined. In addition, the effects of gas flow rates and graphite surface to volume ratios are observed.

The decontamination of the present Hanford reactors involves a once-through cleaning operation. Considerable interest has been shown in determining the feasibility of this once-through technique for cleanup of certain portions of the NPR system. This is the second interim report of a series that covers tests performed in the 242-B Single Pass Flow Facility. The first was distributed in January, 1960.

Theoretically aqueous hydrazine will react with dissolved oxygen for form only nitrogen and water. Most of the experimental evidence, however, indicates that the reaction proceeds rather slowly in low-temperature systems. Tests are currently being conducted to determine whether or not it is feasible to use activated carbon to catalyze the reaction in filtered water. A system of this type would be useful in high temperature reactors when it becomes necessary to convert to single-pass operation.

With the development of the zircaloy-2 clad uranium fuel element, it was necessary to develop a method of closing the end of the element after the extruded tubes were cut to the desired length. Regardless of the ultimate design of the closure, a satisfactory zircaloy-2 fusion welding technique had to be worked out. The first fully successful welding was performed with electron beam welding in a vacuum chamber. To make satisfactory welds, the electron beam welding involved time and equipment, plus undue maintenance on the equipment.

Monthly newsletter of the High Plains Underground Water Conservation District No. 1, discussing the field of underground water. Topics include profiles of water conservation research, annual pre-plant soil moisture survey data, annual Winter Water Level measurement data, and information about the latest water conservation tips.

Monthly magazine discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

Thorium Procedure: As was mentioned in the last report, ammonium nitrate was substituted for ferric nitrate as a salting agent. Also, the acidity of the nitrate solution was reduced from 3.0 molar to 0.5 molar. the revised thorium procedure is described in the report. Radium Procedure: Work has ben initiated on the procedure of Petrow, Nietzel and DeSesa (Winchester Procedure) to determine if the procedure is suitable for very low level concentrations of radium.

During the past year, three papers covering results of a major series of experiments on intergenotype of blood-forming tissue have appeared, demonstrating successful implantation of isologues normal cells in anemic hosts, permanently correcting their genetic defect in hematopoiesis, both with and without irradiation of the host. Heavy host irradiation was shown ineffective as preparations for implantation of homologous cells of widely different antigenic types.

A stainless steel autoclave for superheated water corrosion test was installed and "conditioned". Tests were begun to investigate the feasibility of densifying slip cast stainless steel by means of liquid phase sintering. Attempts to prepare tubular fuel elements by vacuum forming were resumed. Although thick-walled vacuum formed casting have been sintered on the aluminum mandrels without cracking, this has not yet been accomplished with the think sections of interest.