Results are presented of research obtained by means of an apparatus for measurement of time and space correlation and of a spectral analyzer in the study of the longitudinal component of turbulence velocities in a wind tunnel downstream of a grid of meshes. Application to the case of a flat-plate boundary layer is illustrated. These researches were made at the Laboratoire de Mecanique de l'Atmosphere de l'I.M.F.M. for the O.N.E.R.A.

"An investigation of the endurance characteristics, at high Mach number, of the J65-W-7 engine was made in an altitude chamber at the Lewis laboratory. The investigation was made to determine whether this engine can be operated at flight conditions of Mach 2 at 35,000-feet altitude (inlet temperature, 250 F) as a limited-service-life engine. Failure of the seventh-stage aluminum compressor blades occurred in both engines tested and was attributed to insufficient strength of the blade fastenings at the elevated temperatures" (p. 1).

From Summary and Introduction: "An analysis is presented of the postbuckling behavior of a simply supported square flat plate with straight edges compressed beyond the buckling load into the plastic range. The method of analysis involves the application of a variational principle of the deformation theory of plasticity in conjunction with computations carried out on a high-speed calculating machine. The results of the analysis are presented in the form of curves showing the variation of deformations, stress distribution, average compressive stress, and effective width with the applied unit shortening."

Report presenting a general expression for the cross-sectional-area distribution of the minimum-drag body of revolution of given volume and length in a non-uniform supersonic flow field is derived on the basis of linearized theory.

Report presenting time-history data obtained from one type of twin-engine transport airplane during two years of operations on a transcontinental route, which is analyzed in order to determine the magnitude and frequency of occurrence of gust accelerations, gust velocities, and associated airspeeds and altitudes. The gusts were found to be in good agreement with those previously reported for another type of twin-engine transport airplane.

Report presenting ignition-delay determinations of furfuryl alcohol and mixed butyl mercaptans with various white fuming nitric acids were made at several temperatures with a modified open-cup apparatus and a small-scale rocket engine of approximately 30-pounds thrust.

Report presenting an investigation of an inlet mounted on the side of a fuselage and utilizing a horizontally oriented 14 degree ramp located at the top of the inlet at a variety of Mach numbers. The characteristics of this inlet were compared to a conventional ramp-type side inlet. Results regarding the pressure recovery and model drag coefficients, spillage drag coefficients, and thrust minus drag comparison are provided.

Report presenting an examination of the most promising air-cooled turbine blades for conventional turbojet engines, which are convection-cooled corrugated-insert and strut-supported blades. Successful analytical methods of predicting blade temperatures have been found for both blades. Results regarding turbine-engine performance, turboprop-engine performance, performance variations with compressor-discharge air bleed, and some cooling methods are provided.

Report presenting an investigation of a total of 31 flame-holder elements that can be classified into 7 distinct types under simulated afterburner operating conditions to determine their merit and feasibility for use in a high-velocity gas stream. The results indicated that a screen-type flame holder could far exceed the velocity limits of the same size conventional V-gutter at fuel-air ratios below about 0.045.

Report presenting the results of an investigation of the vibratory stresses of a dual-rotating propeller with both six-blade and eight-blade configurations using the NACA 6,000-horsepower propeller dynamometer. Attention was focused on the measurement of vibratory stresses caused by mutual blade interference of the front- and rear-propeller components. A range of blade angles and rotational speeds were used in testing.

Report presenting the effect of small variations in the axial position of the liner with respect to the nozzle on limiting rates of change of fuel flow and steady-state combustion efficiencies in a single tubular combustor. Data were obtained with two liner configurations at three combustor-inlet conditions. Results regarding transient combustion performance and steady-state combustion performance are provided.

Memorandum presenting the effectiveness of chromium and aluminum as inhibitors for mass transfer and corrosion in nickel and nickel alloys by sodium hydroxide under free convection and at fluid velocities of 15 feet per second. The addition of 1 percent by weight of 325-mesh chromium powder to the caustic essentially eliminated the transfer for 50 hours at 1500 degrees Fahrenheit with a temperature difference of 20 degrees Fahrenheit and a flow of 15 feet per second. Results regarding the static test, the toroid test, and a description of the chemical reactions are provided.

Memorandum presenting the results of flight testing of four different ski-equipped airplanes. Two types of skis were tested: hydro-skis designed to operate under or on the water surface and general-purpose skis designed to operate on a variety of surfaces but not underwater. A breakdown of the ski performance for each plane and ski combination is provided.

Report presenting measurements of boiling burn-out heat flux for water flowing upward through an electrically heated tube for ranges of velocity, pressure, length-diameter ratios, and subcooling.

From Introduction: "Data on the extent of decomposition of a sample of aluminum borohy-dride during long-term storage are presented."

Report presenting an investigation to determine the effects on internal performance of several geometric variables intended to produce a short, high-performance convergent-divergent nozzle. Some of the characteristics investigated included variations in the throat-contour radius, combinations of the shape of the convergent section and throat-contour radius, divergence angle, and shape of the divergent section.

Report presenting an investigation to determine the static longitudinal and lateral stability characteristics of an airplane configuration with a trapezoidal wing with modified hexagonal airfoil section and a cruciform tail with 5 degree semiangle wedge section. Data were obtained at a range of angles of attack and sideslip.

Report presenting an investigation of a rocket-propelled model of the Douglas X-3 airplane in order to determine the lateral stability characteristics at zero angle of attack and to evaluate test and analysis technique. Results regarding time histories, lateral trim characteristics, general characteristics of lateral oscillation, and lateral stability derivatives are provided.

Report presenting an investigation in the 16-foot and 8-foot transonic tunnel to determine the effects of Reynolds number and on a swept wing with camber. The wing had 45 degrees sweepback of the quarter-chord line, an aspect ratio of 4, a taper ratio of 0.6, and NACA 65A006 airfoil sections parallel to the plane of symmetry. Results regarding the effect of Reynolds number on the aerodynamic characteristics and effects of roughness strips are provided.

Report presenting an investigation at Mach numbers 1.9 and 3.0 to demonstrate that a central core of air of high stagnation temperature can be produced in the test section of a supersonic wind tunnel. This makes performing wind tunnel testing cheaper and controls for more variables. Results regarding the core studies at Mach number 1.9 and 3.0 and diffuser performance at Mach number 1.9 are provided.

Report presenting an investigation performed at Mach number 2.96 to study the effects of some internal boundary-layer-control systems on the pressure recovery and stability characteristics of a side inlet with half a double-shock external compression surface. Counterbody bleed did not appreciably improve the performance of the inlet, and the maximum pressure recovery obtained was 62 percent. Results regarding the inlet performance with internal bleed and inlet performance with flow injection on external compression surface are provided.

Report presenting an experimental investigation of a series of fixed-geometry exhaust nozzles which simulated a variable exit, which was conducted in the 8- by 6-foot supersonic wind tunnel at Mach numbers 0, 0.6, 1.5, 1.7, and 2.0. Gross thrust performance of the long-shroud exit configurations was considerably better than the short-shroud. Results regarding flow coefficients, thrust characteristics, flight performance analysis of data, and shroud drag are provided.

From Summary: "The exhaust of a 6-inch-diameter ram-jet engine mounted in the Lewis 1- by 1-foot, Mach 3.1 supersonic tunnel was scavenged successfully with a 6.6-inch-diameter scoop. Limiting values of exhaust-to-stream static-pressure ratios and scavenge-system total-pressure ratios were determined for complete scavenging of the products of combustion. The scavenge-system operation influenced the engine exhaust-nozzle pressures under conditions of unstable scavenge flow."

Memorandum presenting results of a free-flight investigation over a range of Mach and Reynolds numbers to determine the longitudinal aerodynamic characteristics of the Northrop MX-775A missile. The missile has a wing, body, and vertical tail, but has no horizontal tail. Results regarding basic data, drag, trim, lift and static stability, damping, and static pressure are provided.