Chemical engineering analysis and stress analysis for design of the 3 megawatt intermediate heat exchanger and steam generator for service with a liquid sodium heat transfer fluid.

From introduction: "Summary report of the 1000 MWe Boiling Water Reactor Plant Feasibility Study performed by the General Electric Company."

From introduction: "Presents the detailed description of a 1000 MW Electric Power Plant employing one or two Boiling Water Reactors as the steam source."

From introduction: "Contains the appendices and a complete set of drawings related to the 1000 MWe Boiling Water Reactor Plant Feasibility Study performed by the General Electric Company for the United States Atomic Energy Commission."

From abstract: "explain all important features pertaining to a new pulsed irradiation reactor, the Capsule Driver, Core, and to analyze the potential problems and hazards of operating this reactor in the existing Spert IV facility."

From abstract: "Verify rod mechanism characteristics reported by the United Shoe Machinery Corporation, demonstrate that rod mechanism characteristics were compatible with reactor kinetics and that over-all reactor system behavior was stable, and to recommend system modifications needed for satisfactory performance."

Report containing basic operating instructions for the operation of the Army Package Power Reactor. This includes descriptions of the the plant's systems, operations, and safety procedures.

Abstract: The natural circulation, direct cycle, boiling water reactor reference design presented in this technical report is the alternate to the preferred preliminary design developed under Phase I of the PL-3 contract. The report presents plant design criteria, summary of plant selection, plant description, reactor and primary system description, thermal and hydraulic analysis, nuclear analysis, control and instrumentation description, shielding description, auxiliary systems, power plant equipment, waste disposal, buildings and tunnels, services, operation and maintenance, logistics, erection, cost information and training program outline.

"This report presents the conceptual design of a 75 MWe prototype Mixed Spectrum Superheater power plant. The scope of the work has emphasized primarily the design, performance, and cost information on the nuclear portion of the plant. The research and development programs required to insure plant feasibility are also present."--Intro.

Chain reacting conditions for plutonium nitrate in water solution have been examined experimentally for a variety of sizes of spheres and cylinders.

Abstract: A survey of the problem of reactor system contamination by radioactive material and methods that have been employed to remove the material was carried out. Following this survey, an investigation of chemical solutions was undertaken to find one which might be successfully employed in the decontamination of a stainless steel steam generator. From a preliminary screening, the most promising chemical method from the view point of minimum corrosion and maximum decontamination is a caustic permanganate treatment followed by and acid rinse.

Abstract: The caustic permanganate-rinse decontamination treatment was investigated. Loop and metallurgical studies were performed to determine optimum operating conditions as well as the metallurgical effects of the treatment. A treatment with 10 percent sodium hydroxide and 5 percent potassium permanganate solution followed by a rinse with a 5 percent ammonium citrate, 2 percent citric acid and 1/2 percent Versene solution was chosen for the decontamination of a stainless steel steam generator. Decontamination factors of greater than 50 were obtained in loop tests using the above treatment. Corrosion and metallurgical results indicated a total penetration of less than 0.01 mil on annealed Type 304 stainless steel with no evidence of any deleterious effects.

Abstract: A decontamination procedure for a stainless steel steam generator similar to the APPR-1 using a fill-flush application of a caustic permanganate-citrate combination solution is recommended. The isolation of the steam generator is to be accomplished by means of specially designed plugs at the reactor vessel outlet and at the primary coolant pumps. Anticipated results, including corrosion rates and decontamination factors, are presented.

Design analysis of a prepackaged nuclear power plant.

Design analysis of a prepackaged nuclear power plant.

Report discussing the evaluation of the "behavior of austenitic and ferritic stainless steels, iron-chromium-aluminum base alloys and nickel-base superalloys, in medium and high temperature simulated reactor environments" (p. 2).

Introduction: This is a final report on the evaluation of Kanigen electroless nickel plating for surfaces in contact with water and steam i a sodium heated AISI Type 316 stainless steel steam generator. The purpose of the coasting was to afford protection from stress corrosion cracking originating on the water-steam side of the unit. It has been concluded that the kanigen coating does not afford adequate protection for the services condition intended. This work was performed as part of the research and development program for the United States Atomic Energy Commission sodium Components Design Project.

Abstract; The fission product data obtained during SM-1 Core I operation (June 1957 - May 1960) is reviewed briefly and interpreted. Evidence is presented to indicate that a fuel element defect was responsible for the high fission product activity level observed in the primary coolant. Relative escape coefficients are calculated and the defect size estimated. Anticipated fission product levels during SM-1 Core II and SM-1A Core I operation are estimated from alpha surface contamination data on completed fuel elements. The importance of in-line sampling for monitoring fission product activity is stressed as well as the need for failed fuel element detection methods.

From Foreword: "Report containing information about ongoing research and development taking place in the Oak Ridge National Laboratory's Fuels and Materials Development Program. This includes a series of test reports covering such subjects as reactor fuels, the development of nitride fuels, and the effects of radiation on structural materials."

Gas pressurization of homogeneous reactor test results.

Abstract: Test procedures for special tests involving in-core SM-1 temperature and flow instrumentation are described (Task XIV Package Tests). These tests involve in-core steady state flow and temperature measurements, loss of flow transients, load transients, reduced primary system pressure operations and reduced element flow. The thermal and hydraulic conditions prevailing in these tests, including steady state and transient burnout rations, are developed. The effects of reduced system pressure and flow on the burnout ratios are determined as are the expected stuck rod conditions when Task XIV test elements are installed. The effect on the maximum credible accident is included and a recommendation to conduct these Task XIV package tests is made.

Abstract: This technical report evaluates hazards involved with SM- 1 plant response and system performance tests (Task XII), to determine the response of the SM-1 plant to step electrical and steam load changes. The report describes the changes in plant equipment and operating procedures for this task and evaluates these changes for possible additional hazards to those described in APAE No. 2, Revision 1, "Hazards Summary Report for the Army Package Power Reactor SM-1."

Report containing ongoing research and experiments of the Oak Ridge National Laboratory's Instrumentation and Controls Division.

Preface: The intermediate heat exchanger is designed for operation in a nuclear power plant using liquid sodium as the primary and secondary coolant. Since the primary fluid coming from the reactor is radioactive, the purpose of the IHX is to transfer heat to a nonradioactive fluid which then goes to a steam generator. Because of this activity the until will be enclosed in a concrete pit and will not be accessible during periods of operation. Immediately after shut down it will be necessary to allow time for radioactive decay before the unit will be accessible to personnel. Because of inaccessibility and possible long periods allowed for decay time, it is imperative that the unit give trouble free operation. During periods of shut down, the internals should have easy access for inspection and repair if necessary so that down time is held to a minimum. The general arrangement of the heat exchanger described in this report presents a conventional design utilizing known materials and existing methods of fabrication. In further consideration of all concepts, designs and analyses developed during this period of the program, it is felt that this preliminary design will provide an intermediate sodium heat exchanger of lower cost …