Report containing ongoing research and experiments of the Oak Ridge National Laboratory's Instrumentation and Controls Division.

From Foreword: "Report containing information about ongoing research and development taking place in the Oak Ridge National Laboratory's Fuels and Materials Development Program. This includes a series of test reports covering such subjects as reactor fuels, the development of nitride fuels, and the effects of radiation on structural materials."

Report discussing the evaluation of the "behavior of austenitic and ferritic stainless steels, iron-chromium-aluminum base alloys and nickel-base superalloys, in medium and high temperature simulated reactor environments" (p. 2).

Report discussing the Plutonium Recycle Critical Facility (PRCF). The reactor, building, associated equipment, operating program, safety, and operating procedures are described.

Report containing basic operating instructions for the operation of the Army Package Power Reactor. This includes descriptions of the the plant's systems, operations, and safety procedures.

From abstract: "Verify rod mechanism characteristics reported by the United Shoe Machinery Corporation, demonstrate that rod mechanism characteristics were compatible with reactor kinetics and that over-all reactor system behavior was stable, and to recommend system modifications needed for satisfactory performance."

Experiment to study temperature conditions during a five-minute heating cycle in the annealing of uranium sheets used as fissile material.

The experiments described in this report were performed for two purposes: (1) to find a chemical, or combination of chemicals, that would be effective for inhibiting corrosion of steel in static portions of the Hanford water systems, and (2) as screening tests to select candidate mixtures for further testing to replace sodium dichromate as the inhibitor of aluminum and steel corrosion in the Hanford single-pass reactor cooling water.

From introduction: "Summary report of the 1000 MWe Boiling Water Reactor Plant Feasibility Study performed by the General Electric Company."

From introduction: "Presents the detailed description of a 1000 MW Electric Power Plant employing one or two Boiling Water Reactors as the steam source."

From introduction: "Contains the appendices and a complete set of drawings related to the 1000 MWe Boiling Water Reactor Plant Feasibility Study performed by the General Electric Company for the United States Atomic Energy Commission."

From abstract: "explain all important features pertaining to a new pulsed irradiation reactor, the Capsule Driver, Core, and to analyze the potential problems and hazards of operating this reactor in the existing Spert IV facility."

Abstract: This technical report summarizes all core physics experiments performed on SM-1 Core I and SM-2 Rearranged and Spiked Core I throughout core life. These measurements were obtained on site during the 16.4 MWYR lifetime of SM-1 Core I and 1.6 MWYR lifetime of SM-1 Rearranged and Spiked Core I. SM-1 Core I was the first stainless steel - UO2 dispersion core to burn out in the Army Nuclear Power Program. Experimental techniques are described and a complete history of fuel movements in the core presented. Measurements include control rod bank positions during all core conditions, temperature and pressure coefficients, control rod calibrations, transient poison effects, source multiplication, and stuck rod positions. The effect of core rearrangement and spiking on core reactivity and core life is also reported. Applicable measurements from the SM-1 zero power experiments are included.