Report presenting a continuous sampling-probe technique used to determine the percentage of JP-5 fuel spray evaporated under conditions common in ramjet engines. Fuel was injected contraststream from a multiple-orifice injector and sampling data were obtained at several distances downstream of the injector. An expression is generated for a description of this phenomenon.

Report presenting three types of aerodynamic interference originating from forward components of airplanes, which are shown to contribute to decreased vertical-tail effectiveness.

From Introduction: "It is the purpose of this report to assemble principles of induction-system design for flight to a Mach number of 2 and to use existing data to show the consequences of compromising them."

Report presenting an investigation on a transonic bump to determine the aerodynamic characteristics of a series of triangular wings. Four basic triangular-wing plan forms with different aspect ratios, taper ratios, and combinations of tip clipping were tested over a range of Mach and Reynolds numbers. Results regarding angle of attack, drag coefficient, pitching-moment coefficient with lift coefficient, and various curves are provided.

Memorandum presenting a correlation of analyses of the effect of distributed surface injection on the heat transfer and skin friction associated with the turbulent boundary layer at high speeds to eliminate the effects of Mach and Reynolds number. Data for heat transfer and skin friction at three Mach numbers are compared with the analyses and the agreement is good.

Report presenting an investigation to evaluate the overall performance characteristics of several annular nose inlets in the supersonic wind tunnel at a Mach number of 3.85. The four experimental configurations investigated consisted of a one-cone, a one-cone with low angle cowl, a two-cone, and an isentropic inlet. Results regarding the internal-flow performance, force measurements at zero angle of attack, overall performance comparison at zero angle of attack, and angle-of-attack force measurement are provided.

Memorandum presenting an investigation in the 4- by 4-foot supersonic pressure tunnel to determine the effects of various vertical locations of the wing and horizontal tail on the aerodynamic characteristics in pitch and of a supersonic airplane configuration at Mach number 2.01. The model was equipped with a wing and horizontal tail, each having a 45 degree sweep and an aspect ratio of 4. The configurations investigated included a high-wing, a mid-wing, and a low-wing arrangement, each with four different horizontal tail locations varying from a position 0.208 semispan below to 0.556 semispan above the body center line.

Report presenting a preliminary study to determine the possibility of utilizing a wingless configuration as a guided missile. The results indicated that the maximum trimmed lift coefficient developed by the wingless missile was somewhat smaller than that of the winged missile at a Mach number of 2.4.

Report presenting an experimental investigation in the transonic blowdown tunnel to determine effects of center-of-gravity location on the transonic flutter characteristics of a 45 degree sweptback-wing plan form of aspect ratio 4.0 and taper ratio 0.6. Solid-construction models with streamwise NACA 65A004 airfoil sections and center-of-gravity locations at three different chords were fluttered at a range of Mach numbers.

Report presenting the effects of a straightening operation on the life of Inconel 500 buckets in a J33-9 engine. Results regarding engine performance and bucket-failure mechanism are provided.

Report presenting an investigation of an airplane configuration model with a 45 degree swept wing of aspect ratio 4.0 and a taper ratio 0.3 with a low swept horizontal tail to determine its longitudinal stability. Longitudinal aerodynamic coefficients and stability derivatives are presented as functions of Mach number over the test range. The results are compared to wind tunnel and rocket model data and generally show good agreement.

Report presenting an investigation at two Mach numbers for a range of Reynolds numbers to determine the pressure distributions at several spanwise stations for a series of 25.4-percent-chord trailing-edge controls on a trapezoidal wing with a 23 degree sweptback leading edge, aspect ratio of 3.1, and taper ratio of 0.4. The report contains the tabulated pressure data for the complete range of test variables.

Memorandum presenting an investigation of the effect of various metallic additives on the molten sodium hydroxide - nickel system. The hydrogen evolved from such systems was measured and the evolution was correlated with the effect of the metal on mass transfer. Results regarding a check with standard tests, purging, presence of two valences for chromium, reaction time of the additive, and pressure within nickel crucibles are provided.

Report presenting an experimental investigation to determine the effect of boundary-layer control and inlet lip shape on the performance of a side-inlet air-induction system for a fighter-type airplane. Two methods of boundary layer control and three inlet lip shapes were investigated at a range of Mach numbers and mass-flow ratios. Results regarding net propulsive thrust are also provided.

Memorandum presenting static crucible tests with additions of the reducing agents sodium chromite Na(sub 3)CrO(sub 4) and manganese dioxide MnO(sub 2) indicate that salts soluble in sodium hydroxide may be added to inhibit mass transfer in nickel. The metals manganese, vanadium, and molybdenum were also investigated in static crucibles and found to be ineffective.

Report presenting an investigation to determine the aerodynamic characteristics of a sting-mounted Douglas Aircraft Company store in the presence of an unswept semispan cantilevered wing of aspect ratio 4.0. Results regarding wing loads and store loads are provided.

Report presenting tests to determine the flight characteristics of an F-86A airplane equipped with an area-suction boundary-layer-control system on the flaps and to investigate the possible operational problems which may arise on a flight installation of boundary-layer control. Results regarding the airplane with slatted leading edge, suction requirements, airplane with suction flap and various leading-edge configurations, factors affecting flap lift increment, and operational characteristics of boundary-layer control are provided.

Memorandum presenting a preliminary free-flight study of the drag and stability of a series of short-span missile configurations with 80, 85, and 90 degrees of fin leading-edge sweep. Increasing the fin sweep decreased the drag markedly.

Report presenting the typical effects of flow distortions on turbojet-engine performance and how flow distortions can be reduced by reducing the distortion entering the inlet diffuser and by improving the amount of mixing that generally occurs in the subsonic diffuser. Sources of distortion in the supersonic inlet are described and steps are suggested that might be taken to reduce their effects.

Contains the results of an investigation in the Langley free-flight tunnel to determine the stability and control characteristics of a 1/12-scale dynamic free-flying model of the Consolidated Vultee 7002 airplane (a flying mock-up of the XP-92 airplane). The wing and vertical tail of this model were of triangular plan form with 60 degree sweepback of the leading edge. The results of both force and flight tests of the model are presented.

Memorandum presenting the results of measurements of gust and draft velocities within thunderstorms at an air field over a 7-day period. The data are summarized in tables and compared to previous flights.

"The frequency of blade temperature to exhaust gas temperature is presented for two locations in the blade and at several operating conditions. The frequency response was determined by Fourier analysis of transient data. Two analytical methods are presented, and results are compared with experimental data. Dynamic response of turbine-blade temperature to exhaust-gas temperature exhibited the form of an approximate first-order lag" (p. 1).

Memorandum presenting the pressure recovery, mass flow, and drag of a twin-scoop inlet-body combination measured at Mach numbers 1.4 and 1.7 at zero angle of attack. Tests were made of the inlet-body combination with an ogival forebody, an ogival forebody with a small amount of bluntness near the tip, and two forebodies of elliptical longitudinal section. Results regarding the effect of forebody bluntness on pressure recovery, effect of forebody bluntness on mass-flow ratio, and the effects of forebody bluntness on drag are provided.

Report presenting a low-speed investigation in the stability tunnel to determine the static longitudinal stability and control characteristics of two wing-fuselage combinations equipped with wing-tip controls of half-diamond and half-delta plan form. Results regarding the effect of control area and plan form on control characteristics and on trim characteristics are provided.