From foreword: This report presents the preliminary design of an industrial gamma irradiator for the sterilization of medical supplies.

Selected components from a staianless steel nonregenerative heat exchanger removed from the U.S.S. Nautilus (SSN571) have been examined for evidence of stress-corrosion cracking. The examination was conducted on three baffle plates, all primary-face seal welds, and the tubes and the surrounding tube sheets of 7 out of a total of 35 tubes. Maximum operating temperature of the heat exchanger was 260 ction prod- F for the inlet primary water and 164 ction prod- F for the exit secondary water. Chloride content of the secondary water averaged 5 ppm, with a maximum of 15 ppm. Only one suspected stress-corrosion crack was found in the components normally in contact with the secondary water. The crack, 2.5 mils in depth, was located on a fully exposed tube. At the 95 per cent confidence level this represented a probability of finding cracking on fully exposed surfaces in 0 to 60 per cent of the rest of the tubes in the heat exchanger. Severe stress-corrosion cracking was found in tubes in the tube-sheet drain area at the juncture with the inner tube sheet at the inlet end, where secondary water seeped past the expanded tubes. Cracks were detected in five of seven tubes for a …

None

This document details activities of the irradiation processing department during the month of January 1960. A general summary is included at the start of the report, after which the report is divided into the following sections: Research and Engineering Operations; Production and Reactor Operations; Facilities Engineering Operation; Employee Relations Operation; and Financial Operation.