Report discussing both the probability of having a reactor accident that would release fission products, as well as the probable extent of the release of the products. This information, along with the contents of the fission products themselves, are based on statistical analysis and educated guesses.

"The e-folding time for the free-molecule pump-out time of the vacuum tank used for the β⁺ ray experiment (N¹⁹ at 20°C) is found to be of the order of 46 millisec, and that used for the Felix experiment (D₂ at 20°C) of the order of 12 millisec. In the Felix tank a particle bounces off of the walls on the average about 30 times before escaping, hence a "getter" material coated on the walls of the tube should result in a slightly more rapid pump-out time."

From summary: A preliminary study of the chemical stability of pile materials in the high temperature power pile has been made.

From abstract: "This report contains the theoretical analysis of a plant to concentrate deuterium from 2 atoms% to 90 atoms% by the NH3-H2 exchange reaction."

A problem proposed by E. Hart to determine whether there are locally high or low neutron densities at the corners of a cubical cavity in a graphite lattice. To simplify the computations consider an infinite two dimensional lattice with a square cavity that has a point source of neutrons at the center (see Figure 1).

Abstract. A systematic procedure for preparing purchase specification on electronic instrumentation or control systems has been developed. This procedure results in preparation of specifications which: 1) make it possible to find any particular specification requirement quickly; and 2) insure that no important requirement has been omitted. Details of this systematic specification preparing procedure presented.

The measured pressure drop across the reactor core, with the sample holder in place, is 6.9 psi, more than twice the estimated value. Better estimates, based on more rigorous mathematical analysis, should be possible for future problems of this type. The 2% density difference which produced the relatively high velocity of approximately 1 fps, in this experiment, will result from a temperature difference of about 8 C. It is concluded that the bulk fluid temperature near the sample holder will be less than 8 C above the average temperature at the same elevation in the core.