From introduction: This map report is one of a series of geologic and hydrologic maps covering all or parts of States within the Basin and Range province of the western United States. The map reports contain detailed information on subjects that characterize the geohydrology of the province, including the ground-water hydrology, ground-water quality, surface distribution of selected rock types, tectonic conditions, areal geophysics, Pleistocene lakes and marches, and mineral and energy resources This is part of the U.S. Geological Survey's program for geologic and hydrologic evaluation of the province to identify prospective regions for further study relative to isolation of high-level nuclear waste.

A survey of measuring devices or probes, which have been used to investigate gas-side fouling, has been carried out. Five different types of measuring devices are identified and discussed including: heat flux meters, mass accumulation probes, optical devices, deposition probes, and acid condensation probes. A total of 32 different probes are described in detail and summarized in matrix or tabular form. The important considerations of combustion gas characterization and deposit analysis are also given a significant amount of attention. The results of this study show that considerable work has been done in the development of gas-side fouling probes. However, it is clear that the design, construction, and testing of a durable versatile probe - capable of monitoring on-line fouling resistances - remains a formidable task.

Payload increases of three to five times that of the Shuttle/Centaur can be achieved using nuclear electric propulsion. Various nuclear power plant options being pursued by the SP-100 Program are described. These concepts can grow from 100 kW/sub e/ to 1MW/sub e/ output. Spacecraft design aspects are addressed, including thermal interactions, plume interactions, and radiation fluences. A baseline configuration is described accounting for these issues. Safety aspects of starting the OTV transfer from an altitude of 300 km indicate no significant additional risk to the biosphere.

The Advanced Servomanipulator (ASM) slave was designed with an anthropomorphic stance, gear/torque tube power drives, and modular construction. These features resulted in increased inertia, friction, and backlash relative to tape-driven manipulators. Studies were performed which addressed the human factors design and performance trade-offs associated with the corresponding master controller best suited for the ASM. The results of these studies, as well as the conceptual design of the dual arm master controller, are presented. 6 references, 3 figures.

Weekly report of the Texas Crop and Livestock Reporting Service on broiler chick numbers in Texas and compared with other states. It includes compiled statistics across six consecutive weeks, from the week ending November 17 to the week ending December 22, during 1983 and 1984 for broiler eggs set, chicks hatched, and chicks placed.

SP-100 is the designation for a nuclear reactor-based power plant being developed for both civil and military missions beginning in the 1990s for such potential space applications as communication satellites, space radar, electric propulsion and space stations. Typically, a system using the SP-100 along with a selected upper stage system would be launched by the National Space Transportation System (NSTS) Space Shuttle System into a near-earth orbit, deployed, and through upper stage propulsion burn(s) be inserted/transferred to its mission orbit. The nature of the advanced design SP-100 gives rise to a set of issues that require special attention to assure that payloads using this power plant are physically and functionally compatible with the NSTS and meet the safety requirements thereof. The purpose of this document is to define and present the requirements and interface provisions that, when satisfied, will ensure technical compability between SP-100 systems and the NSTS.

This report delineates the scope of Jet Propulsion Laboratory`s FY`83 effort in the attitude control area in support of the SP-100 program. Dynamic modeling of the baseline beam configuration has been conducted and is presented herein. As a first cut, the beam is treated as rigid. Its inherent flexibility is then integrated via the hybrid coordinates method. Using the resulting dynamical equations, a preliminary look at attitude control is taken. Only one axis of rotational one flexible mode are included. An alternative to the beam configuration is one that envisions connecting basebody to user via a long, lightweight, flexible tether. A literature search has been conducted in this area and the resulting bibliography is presented. The tether option is not considered viable near term. However, it offers several potentially significant advantages and thus deserves serious consideration for the next generation space power system. This report also treats attitude control constraints imposed by the high temperature and radiation environment and addresses the issue of hardware requirements and availability. Recommendations for FY`84 tasks include assembling and exercising a simulation program for the beam configuration dynamic model and conducting a technology assessment in the area of tether dynamics and control.

The purpose of the present task is to develop high temperature multi-foil insulation suitable for use in the SP-100 thermoelectric converter project. Part of this task involves careful examination of alternative foil and foil spacing materials with the goal of effecting significant weight savings over current state-of-the-art foil insulation. This task involved the determination of the state-of-the-art foils, ascertaining what data is available, what additional data is required, preliminary assessment of the suitability of alternate foil and spacer materials, and specific recommendations for additional tests required to qualify new and existing insulation designs for use in the SP-100.

Nuclear space powerplants can operate at temperatures below 900 K and use stainless steel construction without a weight penalty if new radiator concepts can achieve radiator weights of 1-3 kg/m{sup 2}. Conventional tube-and-fin radiators weight about 10 kg/m{sup 2} because of heavy tube walls to prevent meteroid puncture. Radiator designs that do not require meteroid protection are possible; they operate with fluids of low vapor pressure that can be exposed directly to space in external-flow radiators. An example is the {open_quotes}rotating disk radiator{close_quotes} in which centrifugal force drives a liquid film radially outward across a thin rotating metal disk; meteroid punctures cause no loss of fluid other than from evaporation, which can be small. An even lighter concept is the liquid drop radiator in which heat is radiated directly from moving liquid drops. Such radiator concepts look practical, and they may be much easier to develop than the high-temperature, refractory-metal power systems necessitated by conventional radiators.

SP-100 is the designation for a nuclear reactor-based power plant being developed for both civil and military missions beginning in the 1990s for such potential space applications as communication satellites, space radar, electric propulsion and space stations. Typically, a system using the SP-100 along with a selected upper stage system would be launched by the National Space Transportation System (NSTS) Space Shuttle System into a near-earth orbit, deployed, and through upper stage propulsion burn(s) be inserted/transferred to its mission orbit. The nature of the advanced design SP-100 payloads using this power plant are physically and functionally compatible with the NSTS and meet the safety requirements thereof. The purpose of this document is to define and present the requirements and interface provisions that, when satisfied, will ensure technical compatibility between SP-100 systems and the NSTS.