From Introduction: "The purpose of this analysis was to investigate the use of function of intake-manifold temperature and pressure, exhaust back pressure, and engine speed in place of a ventri as a means of measuring engine air consumption and to determine if this function is suitable for automatic mixture control."

Report discussing a flight investigation of rocket-powered models of a tailless triangular-wing airplane configuration was made through the transonic and low supersonic speed range at the Langley Pilotless Aircraft Research Station at Wallops Island, Va. An analysis of the aerodynamic coefficients, stability derivatives, and flying qualities based on the results obtained from the successful flight tests of three models is presented.

From Introduction: "In the present report, consideration is given to certain features intended to improve the accleration-limiting characteristics of a normal-accleration control system."

From Introduction: "The data included in this report for Nimonic 80A alloy, for instance, represent experiments carried out to help clarify a production problem of grain-size control in an alloy which has been extensively used. The general procedure of the investigation was to carry out controlled laboratory experiments on samples of bar stock to find conditions of heating and hot-working which resulted in abnormal grain growth."

From Introduction: "The concept of supersonic combustion is by no means new, although little work appears to have been published on the subject. For example, an analysis of supersonic combustion to provide lift under a wing is given in reference 1. Reference 2 discusses applications to hypersonic ramjets being studied at the University of Michigan."

Memorandum presenting measurements of gust and draft velocities within cumulus clouds at a certain army air field using an AT-6 airplane. The measurements were made to supplement the at a obtained with P-61C airplanes. The data are summarized in tables.

The following report discusses an investigation that was made to determine the tensile and the compressive properties of a large number of 24ST extruded shapes selected at random from commercial production in order to investigate the interrelation of these properties.

The following report covers an investigation that was done to supplement available experimental data on flow fields behind wings of an aircraft at supersonic speeds, as well as to furnish more quantitative information on the choice of the theoretical method for a given configuration and the accuracy to be expected when using such a method.

From Introduction: "An apparatus that gives a quick and an accurate measurement of the rate of discharge has been has been designed by the NACA and is described in this report."

From Introduction: "The heat-transfer data calculated from measured temperatures are compared with values calculated by the theory of Van Driest for a flat plate with laminar and turbulent boundary layers. In addition, the heat-transfer data from the flight tests are compared with data obtained from the Langley Structures Research Division of ground tests of an identical wing at a Mach number approximately equal to 1.99 in the pre-flight jet of the Langley Pilotless Aircraft Research Station at Wallops Island, Va. The stream static pressure is maintained at about 1 atmosphere, the free-stream temperature at about 75^o F, and the stagnation temperature at approximately 500 ^o F (ref.1)."

From Summary: "Data are included on the amount of fallout from the cloud and the concentration of boric oxide in the cloud."

From Introduction: "The design and flight evaluation of an airborne target simulator for use in tracking studies of fighter-type airplanes equipped with optical gunsights have recently been reported (ref. 1). In this equipment the target airplane was represented by a movable dot of light projected on the windshield of the test airplane."

Report presents the results of tests conducted at Stanford University of a 3-foot model propeller at four pitch settings and at 0 degree, 10 degrees, 20 degrees, and 30 degrees yaw.

This report is a revision of the altitude pressure tables of the United States standard atmosphere given in Technical Report No. 246 and the altitude range has been extended from 50,000 to 80,000 feet.

This report presents the results of an investigation undertaken to determine the feasibility of making glide landings in gusty air. Wind velocities were measured at several stations between the ground and a height of 51 feet, and flight tests were made to determine the actual influence of gusts on an airplane gliding close to the ground.

"There are several constants which have been devised as numerical representations of the behavior of metals under the action of loadings which stress the metal within the range of elastic action. Some of these constants, such as Young's modulus of elasticity in tension and compression, shearing modulus of elasticity, and Poisson's ratio, are regularly used in engineering calculations. Precise tests and experience indicate that these elastic constants are practically unaffected by many of the factors which influence the other mechanical properties of materials and that a few careful determinations under properly controlled conditions are more useful and reliable than many determinations made under less favorable conditions" (p. 1).

From Introduction: "The purpose of the present report is to present a comprehensive summary of theoretical investigations of comprehensible laminar boundary layers which have been carried out since 1949 at the Polytechnic Institute of Brooklyn under the sponsorship and with the financial assistance of the National Advisory Committee for Aeronautics. The results of these investigations are contained primarily in references 1 to 7."

From Introduction: "The purpose of this analysis was to investigate the use of a function of intake-manifold pressure, exhaust back pressure, intake manifold temperature, and engine speed in place of a venturi as a means of measuring engine air consumption and to determine if this function is suitable for automatic mixture control."

From Summary: "A theoretical analysis is presented that permits estimation of the changes in piston-temperature distribution induced by variations in the crown thickness, the ring-groove-pad thickness, and the undercrown surface heat-transfer coefficient. The analysis consists of the calculation of operating temperatures at various points in the piston body on the basis of the experimentally determined surface heat-transfer coefficients and boundary-region temperatures, as well as arbitrarily selected surface coefficients."

From Introduction: "The difficulties experienced in cooling the exhaust-valve seats of the rear-row cylinders have been overcome to a considerable extent by improving the mixture distribution through application of the injection impeller (reference 1) and by augmenting the flow of cooling air to the critical baffles (reference 2). Flight tests of this airplane (reference 3) indicated that the temperatures of exhaust-valve seats on rear-row cylinders were markedly lowered by these modifications and that airplane range, altitude, and gross weight previously limited by these temperatures could be greatly increased."

From the Introduction: "In the present reports the paths of liquid spray droplets issued in the flow field behind an airplane are calculated."

From Introduction: "This report presents only that portion of the data from the first ditching which was to be used roughly establish the accelerations experienced by the pilot and the amount of water pressure to which the fuselage structure was subjected during the ditching."

From Introduction: "The research program included clean-up tests (unpublished data) and stability and control tests (reference 1) made in the NACA Langley full-scale tunnel. An investigation of the aerodynamic characteristics of the power-plant installation in the Cleveland altitude wind tunnel is discussed in this report."

"The data presented in this report are part of a general program to determine the effects of xylidines on the knock-limited performance of currently used aviation fuels" (p. 2).