This report presents the results of a study that argues the importance of providing thermal energy from steam-electric power plants to urban areas.

Samples taken at low power ("no loss" conditions ) over a period from Run 12 to Run 21 were analyzes by mass spectrograph to determine uranium isotopic composition. Results conformed that part of the uranium inventory is at all times held up, out of solution, in the reactor and that there is limited isotopic exchange between dissolved uranium and uranium in solids.

A method for water treatment has been developed for corrosion protection in the steam-water cycle of Homogeneous Reactor Experiment No. 2. The use of potassium phosphates for pH control, hydrazine for oxygen removal, and limitation of chlorides in the boiler water to less than 1 ppm has resulted in trouble-free operation of the steam system from December 1957 to December 1960.

This report describes a computer program--Oak Ridge Thermal Ellipsoid Plot program (OR TEP)--for drawing crystal structure illustrations with a mechanical plotter.

Black cardboard viewer with plastic lenses, "for printed stereo photographs." It has scored portions and instructions for folding the cardboard to create a standing viewer to look through the lenses and keep the image at a distance.

Report describing the progress made in the Clinch River Study for the period May to October 1961. This report is based off of multiple reports of water sampling conducted across six stations in order to evaluate the safety and radioactive content of the Clinch River.

This report supersedes ORNL CF-57-2-1, which was an extension and revision of ORNL CF-54-6-72. Details concerning a recommended system of flow-plan symbols and drawing are given. The system is designed to identify the function of all major instrument components and to show schematically the operation of the instrument relative to the particular process. The system is used for identification and designation. The system is a modification of the Instrument Society of American Recommended Practice (RP 5.1).

This manual represents the recommendations of the Instrumentation and Controls Division committee on Electrical and Electronic Symbols and Drawing that have been issued to date. Section I consists of copies of the American Standards Association Graphical Symbols for Electrical Diagrams, with certain variations or additions that have been recommended by the Committee to clarify or more positively identify the device or element symbolized. Since publication of the present ASA standards, certain elements, such as the transistor, have come into common use. Committee and represent the symbols have been selected after considerable study by the Committee and represent the symbols that seem to be standard Reference Information series, Interim E--1.

The development of nuclear reactors and other sources of nuclear particles has provided the analyst with a new method which has been successfully applied to the determination of microgram and even submicrogram quantities of many elements. In this method, known as "radioactivation analysis," the element to be determined is "activated" through some type of nuclear reaction which produces a radioactive isotope of the element. Since the radioisotope produced decays with its own characteristic radiation and half-life, it is possible, through radiochemical measurements following radioactivation, to devise a method of analysis which is very specific for particular elements. Whenever necessary, the radioisotope is separated by chemical means and its radioactivity is then measured by some type of radiation counter.

Sanderson & Porter have carried out a series of studies over the last four years which indicate that the pebble-bed reactor way be an attractive way to obtain low-cost power. At the request of the Atomic Energy Commission, two design studies have been carried out on this concept at the Oak Ridge National Laboratory. The first of these a preliminary design of a 10-Mw(t) reactor experiment, the PRRE, was initiated September 10, and a report on the study was issued November 1960. The second phase of the work, a conceptual design study of a 330-Mw (e) central station, was initiated November 1, and is the subject of this report.

The objectives of this study have been to examine the problems of the pebble-bed reactor concept and to conceive a design of a facility for investigating the feasibility of this type of reactor. The design must provide for adequate leaktightness of the contaminated-gas system and adequate maintenance of contaminated components, the most vital feasibility questions of the concept.

Studies are being made on the recovery of thorium (and uranium) from granitic rock, since this source represents a very large potential thorium reserve for the nuclear power industry. In preliminary leaching studies on 16 granite samples (containing 8-95 ppm thorium and 1.5-16 ppm uranium), maximum recoveries of thorium and uranium ranged 30-85% and 15-65% respectively, and sulfuric acid consumption was high (30-120 lbs H2SO4 per ton of granite). A relatively high acidity was needed to obtain rapid and efficient dissolution of the soluble thorium fraction. The cost of treating granite was estimated at $3.50-5.20 per ton, variations within this range being dependent primarily on differences in acid consumption for different granites. Estimated costs per pound of thorium plus uranium recovered ranged $30-500.

The general solution to the basic differential equation d^4w/dy^4 +4w= -4f(y) is transformed from the primary form treated in most texts to an alternate form in which each integration constant corresponds to one edge condition at y=0. The relationships between the integration constants of the two forms are derived and the values for the transformed functions are tabulated. The particular solution is derived in general and given in unique form for various functional forms of f(y). Matrix notation is used throughout the derivations; however, a knowledge of matrix theory is not need for application of the results.

The experimental demonstration of fission product release from over heated reactor fuel is necessarily subject in many respects to the arbitrary conditions imposed by the experimenter. Since an almost infinite latitude exists in the choice of materials, atmospheres, gas, velocities, temperatures etc., some allowance for an extrapolation to alternate conditions is definitely in order. The conditions imposed in this study are best described as those most likely to maximize fission product release. Two of the most important variables not investigated in the present report are the influence of metal cladding and the difference in internal nuclear heating as opposed to external radiant heating. In addition a significant uncertainty exists in the understanding of diffusion through large masses such as might result from a scaled-up melt down in a reactor.

Measurements of the interfacial tension between water and tributyl phosphate solutions were made for application to the analysis of Marengoni effect in solvent extraction. A 24 hr flame calcination run to product Th02 particles yielded 40% as product and 54% collected from the furnace walls and from a coarse particle trap. The elution rates of uranyl ion from Dowex 21K using sodium nitrate could be approximated by assuming apparent diffusion coefficients of 1.67 x 10^-7 and 1.18 x 10 ^-7 cm^2/sec, respectively for 960µ and 820µ resn while the corresponding apparent coefficients using sodium chloride were 1. 78 x 10^-7 and 1.27 x 1-^-7 cm^2/sec. The reacting surface of ThO2 Universal Match Co. pellets was determined as a function of fraction dissolved. The lead scews and companion nuts from both the multipurpose saw and dejacketing machine were coated with a baked on lubricant. In Zirflex decladding studies using 4.5 M NH4F - 0.5 M NH4NO3, the average dissolution rate of Zircaloy-2 was decreased only 10% when the overhead condensate was withdrawn and 1.0 M NH4OH was added to maintain the volume.

"An analysis is presented of the accidental release of activity following the operation of the NS "Savannah" at the New York Shipbuilding Corporation docks in Camden, New Jersey. Although a number of accidents are considered, the report is primarily concerned with the environmental activity levels and subsequent exposures which would result from the "maximum credible accident" (p. v).

The equilibrium and maximum override values for xenon and samarium poisoning have been computed using the recently issued effective cross sections of C. H. Westcott. Values are given as a function of specific power, neutron temperature, and epithermal flux content.

Analyses are generally made at the ORR with a view toward determining the surface temperatures of fuel plates.

A review of helium sources, availability, consumption, and future production capacity indicates that the helium consumed in the operation of 100 helium-cooled reactors for 300-Mwe power plants over a 20-year period will run no more than a few per cent of the helium consumed in the U. S. in the next 25 years and less than 1% of the helium that is to be stored during that period under the helium conservation act of 1960 (Public Law 86-777).

A listing and description is given of the experiments associated with the HFIR Critical Experiment-2. The primary experiments concern the reactivity of the bare core, reactivity worth of "gray" control plates, core-power distribution, reactivity. The secondary experiments concern the reactivity of the fuel, and the reactivity worth of a "partial" gray plate.

The absorption in lead of Bremsstrahlung X radiation from a Sr^90 TiO3 pellet in the proximity of Hastelloy "C" was measured. The tenth value layer of the more energetic components of the X-ray continuum was determined to be 1.60 inches.

A carrier containing 138.99 liters of solution, uranium concentration 202.04 g/liter with an isotopic concentration of 97.3% U-233, was prepared for shipment. The total uranium was 28,062 +/- 60 g (95% confidence level) and the U-233, 27,305 +/- 66 g (95% confidence level).

A nonnuclear explosion involving an evaporator occurred in a shielded cell in the Radiochemical Processing Pilot plant at Oak Ridge National Laboratory. Plutonium released from the processing cell contaminated areas in the pilot plant building and nearby streets and building surfaces. The explosion is considered the result of rapid reaction of nitrated organic compounds formed by the inadvertent nitration of about 14 liters of a proprietary decontaminating reagent.

Simulated reactor fuel solutions were circulated at temperatures as high as 365°C in a small titanium pump loop. A hydroclone separator separated heavy phases formed at high temperatures. As the temperature of the solution was increased beyond the two-liquid-phase temperature (327°C), the salt concentration of the light phase decreased and the acid concentration increased. The mole ratios of uranium to sulfate, uranium to copper, and uranium to nickel in the light phase decreased in the same proportion in the temperature range of 330 to 365°C. Corrosion of titanium and Zircaloy-2 specimens was insignificant during the relatively short exposure periods.