A relationship is derived the mean square fluctuating current of a hot wire anemometer and the sic turbulent Reynolds stresses in the stream-coordinate system without employing the usual low turbulent intensity approximation. The relatively simple result is a consequence of assuming proportionality between the wire current reading and the perpendicular velocity component instead of the non-linear dependence required by King's law. The assumption is valid for instruments equipped with the proper linearizing circuitry. The stream-coordinate Reynolds' stresses are then related to the cylindrical polar Reynolds stresses.

This report considers the HFIR reflector design criteria and presents a summary of the reflector design. The reflector type chosen as complying best with the established criteria consists of a 3 in. thick removable beryllium annulus utilizing four concentric cylinders with cooling water flowing through the annuli between cylinders, and an outer 9 in. thick permanent beryllium annulus with axial circular coolant holes. Reflector support structures and experimental facilities are described and probable beryllium replacement costs are indicated.

To date, three types of metal-to-metal seal disconnects have been subjected to thermal cycling and make-break tests. In addition, a commercial disconnect has been procured for testing.

Equilibrium krypton and xenon adsorption isotherms were obtained for four varieties of charcoal and for Linde Molecular Sieves Types 4A and 5A, generally at 0, 25, and 60°c. Such data are of interest in connection with design and evaluation of adsorbers for radioactive noble gas fission products. The isotherms were fitted, by linear regression analysis, to straight-line forms of the Freundlich and Langmuir equations. The Freundlich linear equation gave the better fit and the parameters of this equation are presented for each of the isotherms. Also presented are the constants for an equation representing the temperature dependence of arbitrary adsorption coefficients, the coefficients having been calculated from the Freundlich isotherm parameters. Some aspects of the applicability and accuracy of these results are discussed.

The general solution to the basic differential equation d^4w/dy^4 +4w= -4f(y) is transformed from the primary form treated in most texts to an alternate form in which each integration constant corresponds to one edge condition at y=0. The relationships between the integration constants of the two forms are derived and the values for the transformed functions are tabulated. The particular solution is derived in general and given in unique form for various functional forms of f(y). Matrix notation is used throughout the derivations; however, a knowledge of matrix theory is not need for application of the results.

Oscillations have been observed in a magnetically supported cylindrical rod of plasma. This rod of plasma can be the discharge occurring in the defining aperture of a Mode II, pressure gradient arc. Similar oscillations can also occur in the column of a Mode I arc. These oscillations appear to be the mechanism that drives the Mode II blowup phenomena.

Preliminary results from experiments on the dissolution of beryllium metal and sintered UO2-BeO fuel pellets are reported. In all cases the pellets were fired in hydrogen at 1650-1800°C. Uranium, from UO2-BeO pellets containing more than 60% UO2, is readily leached with boiling 6-13 M HNO3 in about 6 hr. The BeO in these pellets dissolves only slowly in nitric acid; however, in 8 M HNO3-0.2M NaF, it dissolves at about the same rate as the UO2. Sintered pellets containing less than 10% UO2 do not dissolve rapidly in common aqueous reagents. The highest rates are obtained in boiling acidic fluoride solutions; e.g., sintered BeO and BeO-8% UO2 are dissolved initially at a rate of about 1.7 mg min-1cm-2 (13 mils/hr) in boiling 5.8 M NH4HF2.

The IBM-70% code GHT has been programmed for the 7090computer, to be run under control of the IBM-7090 FORTAN Monitor System. By eliminating the use of tapes for intermediate number storage, it has been possible to reduce computing time by a factor of 26 over the 704. A minimum of three tapes are required; one for input, one for output, and the System tape. One scratch tape is required for transient problems, and one punch tape is required if the steady-state temperature distribution is to be punched on cards.

A program translates an algebraic language like Algol into the machine language of an electronic computer must perform the following functions.

The experimental demonstration of fission product release from over heated reactor fuel is necessarily subject in many respects to the arbitrary conditions imposed by the experimenter. Since an almost infinite latitude exists in the choice of materials, atmospheres, gas, velocities, temperatures etc., some allowance for an extrapolation to alternate conditions is definitely in order. The conditions imposed in this study are best described as those most likely to maximize fission product release. Two of the most important variables not investigated in the present report are the influence of metal cladding and the difference in internal nuclear heating as opposed to external radiant heating. In addition a significant uncertainty exists in the understanding of diffusion through large masses such as might result from a scaled-up melt down in a reactor.

Further calculations have been made to determine the desired radial fuel distribution in the HFIR and in the forthcoming HFIR critical experiment. In the process the design of the core was changed to include a 1-cm-thick annular space of water between the two nearly equally thick fuel annuli, a metal-to-water ratio in the fuel annuli of 1.0 (0.050 in. thick plates and coolant channels ) was specified, and the active length of the core was increased from 18 to 20 in. Results of the calculations indicated that the largest ratio of maximum meat thickness to minimum meat thickness occurred in the inner fuel annulus and was equal to 3.6, while the maximum fuel concentration occurred in the outer fuel annulus and was equivalent to about 0.7 g of U-235/cm^3 of meat. The total U-235 loading for this core was 8.01 kg, which results in a core lifetime of about 14 days.

Results of the examinations of corrosion specimens exposed in the HRT are presented. Specimens examined included (1) core screen samples, (2) core specimen array No. 1, (3) blanket specimen array No. 2, (4) core solution line specimen arrays No. 103 and 103A, (5) blanket solution line specimen array No. 203. Complete information is still not available on all the specimens removed from the reactor, however, those data which have been accumulated are presented. These include corrosion rates, computed from specimen weight-changes, and results of chemical analyses of scales removed from the specimens or specimen holders. Also included in the report is a summary of the HRT operating schedule during exposure of the specimen and of the status of examinations for those specimens removed from the reactor prior to run 20.

A total of 104 thermal cycles between 250°F and 1350°F were imposed on a 3 1/2-in. and a 4-in. freeze flange to determine their susceptibility to thermal fatigue. The flange clamping arrangement was modified and various gaskets were used during the cycling in an effort to reduce the gas leakage problem.

This report is presented in order to provide a satisfactory system of symbols and identifications for process-instrumentation equipment and to promote a uniformity of practice that will simplify and expedite instrumentation work. It is intended that the systems presented here should be capable of designating and identifying the multitude of instrumentation items which are used for control and operation of conventional processes, as well as for specialized work peculiar to ORNL. Instrument Society of America standards have been adhered to whenever practical.

To determine the maximum permissible concentration (MPC) of a radionuclide which may be ingested or inhaled with exceeding accepted levels of exposure tot he human body, it is necessary to know the average normal concentration of the natural element in the various tissues of the body. Any element may be ingested or inhaled as the element or as a compound. Although nearly all elements have been observed in living tissue, few quantitative observations had been made before 1950. Preliminary studies showed that individual variations in concentration of all elements were very wide and that geographical variations for certain elements occurred. Collection of tissues from autopsies in 9 cities has been done as of February 1957.

All tissues included in this report were received from Miami, Florida and the majority are from Jackson memorial Hospital. They were collected, ashed and analyzed according to the methods described in ORNL-CF-57-2-2. The average value of the concentration for each element in a tissue is the average of the concentrations in only those samples of the tissue which contained the element. For example, if, of 25 lives analyzed, only 10 contained lead, the average for lead in liver is the average of those 10 values. For those tissues in which an element does not appear in every sample, the lowest value is reported as less than the limit of sensitivity of the method for that element in that tissue. For the elements, cesium, lithium and rubidium, the ash was a composited ash sample for each particular tissue. As an example, in lieu of analyzing 20 individual aortas, only on composited aorta as was analyzed.

All tissues included in this report were received from Dallas, Texas and were collected, ashed and analyzed according to the methods described in ORNL-CF-57-2-2. The average value of the concentration for each element in a tissue is the average of the concentrations in only those samples of the tissue which contained the element. For example, if, of 25 lives analyzed, only 10 contained lead, the average for lead in liver is the average of those 10 values. For those tissues in which an element does not appear in every sample, the lowest value is reported as less than the limit of sensitivity of the method for that element in that tissue. For the elements, lithium and rubidium, the ash was a composited ash sample for each particular tissue. As an example, in lieu of analyzing 20 individual aortas, only on composited aorta as was analyzed.

Analytical expressions were obtained for the time behavior of fuel concentrations and fuel-feed rates in single-region, spherical, UO3-ThO2-D2O reactors.

The HRT leak detector system consists of four headers each of which are connected on one side to a common supply of pressurized water and on the other side by individual tubing to the ring grooves of approximately twenty flanges. There are two methods of detecting the loss of water that are particularly applicable to the HRT: (1) By the loss of pressure in a constant volume system; (2) By the measurement of flow from a constant pressure system. It was determined to investigate the second method which requires a flowmeter capable of measuring flows of .5 cc or less of water per hour. The experiment flowmeter constructed performed almost exactly as the design calculations predicted.

A simplified method was developed for calculating wall-scatter gamma radiation escaping through a shield opening. The method was applied to the HRT and the results showed that next to the line of sight contribution, scattering of the wall of the shield opening was the main contribution to the dose at the rear edge of the shield. Design charts were prepared that give the dose as a function of the gamma source location with the reactor cell.

Thorium nitrate, recovered from irradiated thorium metal processed in the ORNL Thorex Pilot Plant, was converted to thorium oxide and then to the fluoride in one pilot-plant-scale and two laboratory-scale runs. Activity distributions, decontamination factors, and safety of the process are treated. (D.L.C.)

Lewis in 1929 determined the thermal conductivity of beryllium metal for the first time. The next measurement reported in the open literature on the thermal conductivity of beryllium was by Powell in 1953. Measurements were also made by Grenell, Linebrink, and Johnson at Battelle Memorial Institute in 1947. Their values are in good agreement with those of Powell.

The fact that material transport does occur under conditions of finite temperature difference in a flowing molten metal system was established. The rate mass transfer was thought to be either diffusion limited or solution rate limited. It is believed that the mass transfer of structural materials in Na or NaK systems is solution rate limited. The limiting process has not been qualitatively or quantitatively confirmed for the Inconel-Na or Inconel-NaK system. Increasing the maximum system wall temperature increases the amount of mass transfer, at least above 1300 deg F. The effect of the total temperature difference across the system on the amount of mass transfer was determined.

The circuits described herein and shown functionally in Fig. 1 are to be added to the HRT control circuit to provide control and protection for the revised HRT cooling water system. The circuitry will provide protection against excess pressure in the demineralized cooling water loop and cooling water activity, will initiate action to insure containment of activity in event of an explosion and will provide emergency cooling water from the tower basin when required.