Technical report surveying radio-chemical analyses by ORNL's Analytical Chemistry Division and Health-Physics Division of large volumes of rainwater for plutonium, uranium, and fission products. Overall, carrying efficiencies for Al(OH)3 scavenging of rainwater were determined for these elements, as well as for Pu and U. [From Abstract, Introduction]

Black cardboard viewer with plastic lenses, "for printed stereo photographs." It has scored portions and instructions for folding the cardboard to create a standing viewer to look through the lenses and keep the image at a distance.

This report describes a computer program--Oak Ridge Thermal Ellipsoid Plot program (OR TEP)--for drawing crystal structure illustrations with a mechanical plotter.

This report presents the results of a study that argues the importance of providing thermal energy from steam-electric power plants to urban areas.

An investigation of the materials for use in the water-moderated and cooled Aray Package Power Reactor (APPR) operating at about 500°F was made. The available literature was analyzed, and the results of the different investigators were compared and averaged. Twenty different materials, including stainless steels, nickel alloys, Stellites and others, were investigated from the point of view of physical properties, susceptibility to radiation damage, and corrosion resistance. Corrosion rates were established for all the materials under various conditions, such as irradiation, flow weld, stress, and various water conditions. Type-304 stainless steel was selected as the basic structural material. Operating conditions, to maintain minimum corrosion, were established also.

The indicated methods for determining the following constituents of Diban, which is an aqueous solution of dibasic aluminum nitrate, Al(OH)2NO3, were evaluated statistically: 1aluminum by gravimetric, volumetric, and spectrophotometric procedures, 2. basicity (hydroxyl value) by formation of an aluminum complex and titration of the free acid with standard alkali solution, 3. total nitrogen by the Kjeldahl method, 4. ammonia by the Kjeldahl method, and 5. nitrates by means of a cation-exchange resin and titration of the liberated acid with standard alkali solution. Recommendations are made regarding the preferred methods of determining the constituents in dibasic aluminum nitrate and regarding means of minimizing errors in these analyses.

Several plates of 98.7% Th - 1.2% U 235 (clad in aluminum) were irradiated in the MTR for an integrated flux of 2.6 x 10 21 neutrons/cm2. Although these samples represent an early development in bonding of aluminum to thorium and there are better methods at present, the bond proved to be quite strong and both clad and core were dimensionally stable under irradiation. The production of uranium 233 was as much as theory would indicate and the total amount of fissionable material material after irradiation and after decay of the protactinium 233 was greater than before irradiation. A fuel element of this nature appears to offer excellent potentialities from the standpoint of radiation stability.

This report presents data obtained from processing 33 Clementine Reactor fuel elements in the ORNL Metal Recovery Plant to recover approximately 15 kg of plutonium and 0.16 g of americium.

LITR Fluoride-Fuel Loop. — The inconel loop was dismantled for removal of the samples and for recovery of the uranium by using the remote cutting tools installed in a half cell of the Solid State Building. Disassembly proceeded without incident. An electric-arc cutting technique was developed for removal of the stainless steel enclosure around the pump bowl. Fission power and maximum flux were determined by irradiating a simulated loop, by heat-balance calculations, by radiochemical analyses for fission products in the fuel, by measuring the activation of cobalt foils attached to the loop, and by activation of the loop tubing itself. The determination of the power by these various methods gave 2.5 to 2.8 kw during operation of the loop, and the maximum power density was 0.4 kw/cc. Chemical analyses of the fuel were carried out to determine U, Zr, and the major constituents of inconel: Ni, Cr, and Fe.

An ion-exchange -- polarographic method was developed for the determination of iron(III) in Homogeneous Reactor Fuels. Copper, which interferes, is removed from the fuel by plating it onto a cadmium coil. Iron is oxidized to iron(III) by potassium permanganate, and the iron(III) is separated from interfering metal ions by ion exchange on a Dowex 1 resin column that is in the sulfate form. The iron(III) in the effluent is determined polarographically in 0.5 M sodium citrate solution as supporting electrolyte. A fairly well defined polarographic wave is obtained for the iron(III) → iron(II) reduction at a half-wave potential of approximately -0.15 v. vs. the S.C.E. The relative standard deviation of the data for 2 µg of iron(III) per ml of solution in the polarographic cell was 6.5%; for 10 µg of iron(III) per ml it was 0.6%.

The enthalpies and heat capacities of seventeen fluoride mixtures in the liquid state have been determined using Bunsen Ice Calorimeters and copper block calorimeters. The fluoride mixtures were composed of the fluorides of two or more of the following metals: lithium, sodium, potassium, beryllium, zirconium, and uranium. The enthalpies and heat capacities of most of these mixtures were studied in the solid state also. Estimates of the heat of fusion have been made. General empirical equations have been developed which represent the enthalpies and heat capacities of the fluoride mixtures in the liquid and in the solid state.

Diffusion in an arc plasma across a magnetic field is investigated. The geometry is similar to that reported in ORNL-1890 but with the addition of magnetic mirrors on the ends of the arc chamber. It is shown that mirrors do not eliminate the "short circuit" effect. Comparison of the e-folding length, rₒ, of the radial ion density with and without mirrors, affords a direct measurement of ℓ/λ where ℓ is the arc length and λ the mean-free-path. In addition rₒ is independent of gas pressure with mirrors and varies as √p without mirrors. The condition for the elimination of the "short circuit" effect is discussed, as well as the case in which the "short circuit" is still present but the ions diffuse (rather than stream) to the end walls. In this case rₒ is directly proportional to the gas pressure. These effects are compared to some experimental results of Neidigh

The development of ionic methods for the determination of corrosive products in the highly radioactive Homogeneous Reactor (HR) fuels has been of major interest in the work of the Ionic Analyses Laboratory. Methods for the spectrophotometric determination of aluminum and for the polarographic determination of iron in HR fuels have been developed. The polarographic determination of molybdenum in uranyl sulfate solutions was studied. A polarographic method for the determination of zinc was developed. A fluorometric method for the determination of microgram amounts of fluoride was studied. Three organic reagents were investigated as precipitants for microgram quantities of zirconium in HR fuel. The automatic photometric titration technique was applied to the determination of thorium and of sulfate. A method was developed for the ion-exchange separation and potentiometric titration of cobalt. The ultraviolet absorption spectra of technetium and rhenium were studied.

An evaluation of the relative health hazards of radioisotopes produced in nuclear reactors is reported. The most important hazards were indicated to be I131, the Sr90 - Y90 chain, the Ce144 -Pr144 chain, Sr 89, the Ba140-La40 chain, Y91, the Zr95-Nb95 chain, Pr143, La140 , and Pa233. The most critical body organs affected by air-borne contamination are the thyroid gland, the bone marrow, the lungs, and the gastrointestinal tract. Where possible, continuous daily removal of gaseous and solid fission products from the reactor environment can be shown to permit very significant reductions in the total hazards. Homogeneous reactors, such as the Thermal Breeder Reactor and the Homogeneous Plutonium Producer Reactor, specifically studied in this report, are designed with daily removal cycles and may be considered potentially safer than heterogeneous reactors.

A direct titrimetric method for the determination of trivalent uranium in uranium trifluoride and mixtures of fused fluoride salts was developed. The method is based on the stoichiometric oxidation of trivalent uranium to the tetravalent oxidation state with an acidic solution of methylene blue. The sample containing trivalent uranium is dissolved at room temperature in an excess of standard methylene blue solution in a carbon dioxide atmosphere; the excess oxidant is variation of the method is 1.5 per cent for 5 mg quantities of trivalent uranium. The method was applied to various mixtures of fluoride salts containing both trivalent and tetravalent uranium.

Changes made in the Thorex process flowsheet were a decrease in the extraction column acidity to decrease thorium losses and the addition of a second thorium solvent-extraction cycle to provide the increased decontamination required when thorium irradiated to 2000-4000 g of U233 per ton is processed. Bonded slugs could not be dissolved by the Thorex flowsheet procedure. Various laboratory scale studies on feed preparation, first-cycle variables, and radiation damage to the solvent are reported.

The countercurrent gas-liquid system BF3(g)—anisole·BF3(l) for the concentration of boron isotopes has been studied. The single-storage separation factor varies from 1.039 at 0°C to 1.029 at 30°C. Rate of exchange is rapid, and, with efficient contacting equipment, complete exchange may be obtained in less than 15 sec. A total separation of 1.525 has been realized in laboratory equipment. The critical-product reflux reaction is quite efficient. Only about 55 moles of BF3 remain in each million moles of effluent solvent under laboratory conditions. The vapor pressure of BF3 over the complex rises sharply as the temperature is increased. At 0°C the pressure is 150 mm Hg, and at 40°C the pressure has risen to 1800 mm Hg. From vapor-pressure measurements, an approximate upper limit of ΔH= -12kcal per mole of complex was calculated for the reaction [equation not transcribed]. Qualitative tests indicate good resistance of anisole to decomposition by BF3 under plant conditions. The uncatalyzed exchange of boron between BF3 and BCl3 was found to be too slow to be exploited in a countercurrent system. The single-stage, equilibrium separation factor for the Nitrox system is a function of acid concentration. At 26°C the factor ranges from 1.064 with 1 M acid …

This quarterly progress report of the Aircraft Nuclear Propulsion Project at ORNL records the technical progress of the research on circulating-fuel reactors and other ANP research at the Laboratory under its Contract W-7405-eng-26. The report is divided into three major parts: I. Reactor Theory, Component Development, and Construction, II. Materials Research, and III. Shielding Research. The ANP Project is comprised of about 530 technical and scientific personnel engaged in many phases of research directed forward the achievement of nuclear propulsion of aircraft. A considerable portion of this research is performed in support of the work of other organizations participating in the national ANP effort. However, the bulk of the ANP research at ORNL is directed toward the development of a circulating-fuel type of reactor. The design, construction, and operation of the Aircraft Reactor Test (ART), with the cooperation of the Pratt & Whitney Aircraft Division, are the specific objectives of the project. The ART is to be a power plant system that will include a 60-Mv circulating-fuel reflector-moderated reactor and adequate means for heat disposal. Operation of the system will be for the purpose of determining the feasibility, and the problems associated with the design, construction, and operation, of a …

From July 7 to August 31, 1955, 20 tons of uranium and 1,200 g of plutonium were recovered in 47 days of plant operation at an average rate of 833 lb/day of uranium and at a cost of $2.60/lb of uranium. Uranium and plutonium recoveries were, respectively, 99.9 and 95.5 per cent.

This memorandum is the first in a series reporting progress in the program of critical experiments in the ORNLArmy Package Power Reactor Project. The critical assembly, designated as CA-25, is analogous to the APPR design core and consists of 45 fuel boxes, in a 7 x 7 array with the corners removed, contaIned in a large water tank. Two sides of each box are slotted for the insertion and positioning of any desired loading of eighteen plates of fuel, structural material, and poison. The array is submerged in water to provide a moderated and reflector. Enriched uranium metal, in two-mil-thick foils 2.5 x 22 in, is encased in type 304 stainless steel sheets, 2.7 x 23 x 0.0105 in., to form fuel plates. Stainless steel plates, 2.7 x 23 x 0.025 in. are used to simulate additional steel in the APPR core. It is, therefore, possible to maintain an essentially constant metal to water ration in the assembly when the fuel content is varied. The fuel is distributed as uniformly as possible in all boxes and a symmetrical distribution of materials is maintained in the core at all times. Fuel plates containing half-width (1.25 in) uranium foils are provided for …

Observations of the effects of neutron damage to zirconium oxides led to the conclusion that the cubic form of ZrO2 is more stable to such damage than the monoclinic form. It has been reported that zirconium corrodes more rapidly in certain liquids when exposure is made under radiation (neutrons and fission products). It is well known that on heating monoclinic ZrO2 a transformation, monoclinic to tetragonal (very similar to cubic), occurs at about 1500°C. The transformation involves sufficient atomic rearrangement that pieces of ZrO2 normally crack and crumble. It is suggested that the effects of neutrons on monoclinic ZrO2 may be similar so that a protective oxide film on the metal would be destroyed soon after its formation. It might be possible, therefore, that the protective oxide film on zirconium metal which is normally monoclinic might be less resistant to corrosion under radiation damage than a similar film which was cubic.

Much of the shielding work carried out with the Bulk Shielding Reactor (BSR) has yielded data of particular interest for the design of swimming pool type reactors, However, it is often difficult for a reactor designer to locate such data since it may be recorded in a report primarily concerned with shielding problems. Therefore, this memorandum presents a bibliography of reports from the Bulk Shielding Facility arranged according to the application of data to the various aspects of reactor design.

Calculated data and graphs describing the effects of batch thermal-neutron irradiations on the buildup of fission products in natural uranium, enriched uranium, and thorium are presented together with empirical equations and plots correlating total fission product activities and/or decontamination factors. Fluxes of 1012-1015 are considered.

A fifth in-pile loop experiment, L-4-8, was completed. The loop operated in-pile for a total of 1637 hr, during which time the LITR energy output was 4377 Mwhr. The average fission power in the loop based o cesium analyses was 622 w when the LITR was at full power (3 Mw). Based on oxygen data, the generalized corrosion rate for the first 300 hr was 4.0 mpy; the rate for the remaining 1357 hr was 0.7 mpy. The nickel data gave parallel results. The corrosion of the type 347 stainless steel, Zircaloy-2, and Ti-55AX [unintelligible] exposed in the core and in in-line holders was generally consistent with that observed in previous in-pile loop experiments. Some differences with steel were attributed to the fact that this was the first loop containing steel specimens operated with 0.04 m H2SO4 present in the uranyl sulfate charge solution (0.17 m UO2SO4, 0.03 m CuSO4). Stress specimens, made from the alloys Zircaloy-2, type 17-4 PH stainless steel, and Ti-C-130-AM, were exposed in care, in-line, and pressurizer locations. Microscopic examination and average weight loss gave no indication of effects attributable to the stressed condition of the specimens.