Abstract: Experiments on colloid milling and pumping show that uranium trioxide, when carefully dehydrated, can be dispersed in water to form a relatively stable slurry, suitable for a homogeneous slurry pile. At temperatures considerably below those of anticipated pile operation particle size growth occurs attended by increase in settling rate and decrease in viscosity. Theses properties of the slurries may be strongly affected by impurities present as well as by special operating conditions.

Introduction. the colorimetric determination of iron based on the formation of the colored ferrous-1,10-phenanthroline complex has been used successfully by a number of investigators. In this technical report, its adaptation to the routine determination of iron in cerium, thorium, and beryllium metals and their compounds is described.

Technical report describing two experiments performed to compare the amounts of fission gases swept out of UNH solution with those amounts swept out of PU solution under idential condiditons. The charge wire technique was used. The essential date and the results are given in tables in the report.

Technical report that attempts to bring together the various chemical procedures which proved most useful in studying the results of cyclotron bombardment or small scale neutron bombardments of heavy element targets. The report is limited to the elements of the "actinide", or second rare earth series, starting with thorium and including the newly discovered elements of atomic number 95 and 96. Every attempt is made to include all details necessary so this report can serve as a practical laboratory guide. The report covers separation problems, time factors, and dealing with dangerously radioactive targets.

Abstract: Pure UO2F2 is made by reaction between anhydrous HF and pure UO3. Although it is difficult to prepare free of water, it is not very hygroscopic. Prolonged heating at 100-105 degrees releases 99.9% of the water in an aqueous solution; the rate of loss of water is very small after saturation is reached. X-ray diffraction data give a density of 6.2 for the solid. The density of a 1.004 M solution is 1.274; the density of a saturated solution (5.130 M) is 2.400. The densities of F-9 solutions have been calculated from the densities of ordinary aqueous solutions, and the values are compared graphically. Data on the solubility indicate that there is a small increase in the range 25-100 degrees. Recovery of pure F-9 from a solution is hampered by hydrolysis of U)2F2 to give HF. The HF may be held back by addition of UO3 or CaO; the use of the latter, however, makes more difficult the recovery of all the F-9. Molar conductivities of UO2F2 solutions at 25 degrees, as well as the specific conductivities of a 1 molar solution containing various concentrations of UO3, have been determined. The addition of UO3 lowers the conductivity. The low …

Abstract. In addition to the hexagonal and monoclinic bismuth phosphate precipitates, whose structures are now known, a third crystalline phase has been found to appear in BiPO4 precipitates after (a) extremely long digestion in concentrated nitric acid; (b) oven drying at 800 degrees to 1000 degrees. Thought very small single crystals of the component have been isolated, nor crushed sample contained less than 30% of the beta-form. The cell size and symmetry of the crystal indicates that there ae two bismuth atoms in the cell, and there is no evidence that the compound is not BiPO4. It is suggested that this maty be a third form of BiPO4, stable over a short range of conditions, and tending to revert to the beta-form.

The work described in this technical report was undertaken as part of a larger program dealing with a systematic investigation of changes in the physical prosperities of artificial graphite due to neutron bombardment. Very pronounced among those changes is the increase in the elastic modulus. Since there is a general relationship between the elastic modulus of a given substance and its specific heat, it was expected that corresponding changes will occur in the specific heat. In conclusion, the experiments determined that it appears that the low temperature specific heat measurements of strongly bombarded samples will be helpful for the understanding of the nature and the mechanism of the changes produced by neutron bombardment and annealing.