The following document is meant to inform the reader on the makings of a cement base for the hot filament mass spectrometer source as part of a publication in the review of scientific instruments, "Laboratory and Shop Notes".

Abstract: "A novel procedure employing ion exchange resins was developed to separate chromate ions from hydrogen peroxide, permitting, permitting the subsequent analysis of peroxide to determine its decomposition in sodium chromate solutions. At high pH's, peroxide was absorbed anionically on the ion exchange resins along with chromate. By selecting a resin which would be effective at nearly neutral conditions, chromate was satisfactorily separated from peroxide. It was found that the rate of peroxide decomposition in slightly alkaline sodium chromate solutions was dependent on temperature, pH, aeration, and chromate concentration. No significant effect on decomposition was caused by visible light."

The following report is a study of the separating qualities of a loop-type separator that can obtain separation with a smaller pressure drop.

Abstract: "Uranium monocarbide-Zircaloy II alloy cermets were developed and tested for chemical and physical properties. It was determined that pure uranium monocarbide can be prepared by vacuum are melting techniques. Following melting, the combination, hot pressing, and corrosion behavior of dense monocarbide has been studied. The preparation of uranium monocarbide-Zircaloy II cermet bodies was investigated by means of hot pressing, cold pressing and sintering, warm pressing, extrusion, and hot rolling. The corrosion resistance of the cermets was related to such variables as composition, preparation technique, and powder size. 01 per cent uranium monocarbide, 70 per cent zircaloy II cermets withstood corrosion tests in 680 F water. Cermets having above 30 weight per cent uranium monocarbide were not corrosion resistant."

Abstract:"A method is described for the electroreduction of plutonium to the +3 valence state in a nitric acid-sulfamic acid solution. Exploratory experiments in the search for a coulometric titration of Pu(III) using electrolytically generated ceric ion are also described. The results strongly indicate that a convenient procedure can be devised. Suggestions for future work are presented."

Report discussing progress made by the Metallurgy Division of the Physics of Solids Institute during the quarter ending January 31, 1951.

A report regarding a drilling project at Tenderfoot Mesa, Mesa County, Colorado.

Detailed information on the radiations associated with several even-even isotopes has been obtained. In some instances enough information has been gathered to allow construction of skeleton energy level diagrams for the isotopes. Activities studied were obtained from pile irradiation of pure odd-even natural isotopes and included Dy160, W182, Sm152, Gd152 and Gd154. Details of the work done on and results obtained for these isotopes are reported in section 3. Some analytic and experimental studies were carried out on the application of tilting beta-ray spectrograph sources for improvement of resolution. The uses and limitation of this technique are discussed in section 2.

"ABS>Injection trajectories were calculated for different injection conditions for the Cambridge Electron Accelerator, considering also the effect of magnetic fringing fields. The general problem of matching the emittance of the linac to the acceptance of the synchrotron in the transversal phase space is considered, and it is shown that this can be done by a set of two quadrupole lenses. In order to eliminate rudial betatron oscillations due to energy deviations of the injected particles, a pulsed electric quadrupole lens in the synchrotron in combination with two deflectors between linac and synchrotron can be used to place particles of different energies on their specific equilibrium orbits. A layout of the whole injection system following the output of the linac is given."