Monthly magazine discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

A simple non-destructive chemical method for the identification of cadmium plating is presented. The test requires no special techniques or equipment and may be conducted in less than fifteen seconds.

The object of the work performed under this contract was to investigate the possibility of gas plating copper base metal with (a) pure chromium metal from chromium hexacarbonyl vapor; (b) chromium-nickel plating from a mixture of chromium hexacarbonyl and nickel tetracarbonyl. The object of the work performed during the final month was to confirm the fact that the gas plating of chromium metal and chromium-nickel laminates free from nitrides, oxides and carbides was practical.

Initial rough measurements of the quality of the gamma radiation from Co-60 in air indicated agreement with the theoretical calculations of Spencer and Fano for an infinite water medium. Further experiments were performed, duplicating the conditions assumed in the calculations. Since the spectral region between 100 kev and 1 mev has already been examined by Hayward, it was decided to investigate in detail the region below 100 kev and above 1.0 mev. Total radiation dosage measurements were made in water using Victoreen ion chambers. The build-up factor was measured as a function of distance. Good agreement was obtained with the results of White. The spectrum below 150 kev was examined with a small NaI(Tl) scintillation counter and both the shape of the spectrum and the attenuation as a function of distance was in good agreement with the calculations. At distance less than 30 cm from the source the spectral shape changed, gradually broadening with the peak shifting to higher energies. The primary region above 1.0 mev was examined using a large NaI(Tl) crystal, and the gradual loss of resolution in the two primaries as a function of distance with an increase in lower energy events was shown. The measurements to …

This report is the culmination of a year of progress and planning in the high-energy particle field. During this year the Brookhaven Cosmotron has been successfully completed and brought into operation for research at 2.3 Bev. Preliminary experimental results with the copious output of π-mesons are in process of publication. Multiple production of mesons has been observed, a few V-particles detected, and the interactions of π-mesons in hydrogen have been studied. Yet it already appears that higher energies will be needed to produce and study the several new heavy particles detected in cosmic ray observations.

Statistical methods were employed to measure relative values of electron loading and spark-over voltage for a large number of unoutgassed electrode materials. Test voltages up to 110 KV were employed in vacuum of the order of 10<sup>-7 mm Hg. All metals showed a square root dependence between spark-over voltage and spacing.

At high excitation energies, competition of proton and c-particle emission with neutron emission becomes important. For low excitation, the competition between Y-emission, neutron emission, and fission should be taken into account. To aid in the evaluation of this competition an experiment has been performed to measure the number and energy spectrum of the protons and c-particles emitted in the high energy bombardment of uranium with protons, deuterons, and c-particles.

This is an extension of the results reported in UCRL-2203, where bore diameter is determined in a linear accelerator.

Quarterly progress on the metabolic properties of various materials, radiation chemistry, biological studies of radiation effects, health chemistry, health physics.

Neutron detector traverses of the untamped Oy (Godiva) and the Tu- or Ni-tamped Oy (Topsy) metal critical assemblies have been obtained by counting the following types of radiation : 1) y-activity of U 235 and U238 fission products; 2) fission fragments of Np 237 in a spiral chamber; 3) and Beta -activity of Au and S. At a few positions within the assemblies, and for the U235 fission spectrum, cross section ratios of a number of pairs of fissionable isotopes were determined by means of a comparison fission chamber. At the center of Godiva, af(25)\af(28) = 6.2, and this ratio for the Topsy Oy-Tu assembly ranges from 6.8 at the center to 76 at a radius of 8-1/4”. Results of radiochemical analyses for fission and other reaction products, by Group J-11, are listed in an appendix.

This report describes the construction, operation, and typical uses of Topsy, the versatile, remotely controlled, critical assembly machine at Pajarito. Section 1 covers the mechanical design of the machine, and the hydraulic and electrical operation of the various components. Section 2 describes how Topsy is used for investigating reacting metal assemblies. Procedures for establishing a delayed critical configuration and operation at delayed critical are illustrated for the oralloy-tuballoy system. Also included are brief descriptions of oralloy-nickel, plutonium-tuballoy, and low density and concentration assemblies that have been made on the machine.

This report describes the water-flooding projects in Anderson, Franklin, Linn, and Miami Counties, Kansas, and include methods of water treating and the results obtained.

Maps of parts of Hillsborough and Polk Counties, in the Land-Pebble Phosphate District, Florida.

A report regarding the results of core drilling for uranium-bearing lignites in the Bar H Area, Slim Buttes, Harding County, South Dakota. This report is done on behalf of the Division of Raw Materials of the U.S. Atomic Energy Commission

A report regarding uranium-bearing carbonaceous shale and lignite in the goose creek district in Cassia County, Idaho, Boxelder County, Utah, and Elko County, Nevada.

"The purpose of the reconnaissance was to determine the distribution and the economic importance of the radioactive occurrences of the region. The methods, as well as the results, of the investigation, are given in this report."

A progress report regarding the stratigraphy of the Triassic and associated formations in part of the Colorado Plateau region. Concerns work done on behalf of the Division of Raw Materials of the U.S. Atomic Energy Commission.

A preliminary report regarding exploration in the Atkinson Mesa Area, Montrose County, Colorado

A report describing the discovery of a new vanadium mineral found at several mines in Colorado and Utah, including a description of its physical and chemical properties, prevalence, and other relevant data.

Aerial image shows the result of an airborne radioactive survey over an area of 940 square miles in Apache County, Arizona with the approximate location of radioactivity anomalies found. Text describes methods used and discusses the anomalies.

Report discussing development drilling on the contact no. 4 claim, Gypsum Vall District, San Miguel County, Colorado

Photogeologic map of the Orange Cliffs-2 quadrangle, Wayne County, Utah

Aerial image shows the result of an airborne radioactive survey over an area of 700 square miles in Sweetwater County, Wyoming with the approximate location of three radioactivity anomalies found. Text describes methods used and discusses the anomalies.

A report discussing an exploration of the san Miguel Bench