This report follows work that is meant to determine the settling rate and viscosity of Hanford Waste metal slurry as a function of prolonged agitation and shear, and to repeat these determinations on a synthetic incubated material similar to that used in the acidification studies, HW-18367, and to make a direct comparison between the genuine and simulated wastes.

This report follows investigations of fission fragments, as they contain charged nuclear high energy and contain a high excess of neutrons.

From introduction: "A simplified calculation has been carried out in order to gain some insight into the flux distribution, peak to average power density, efficiency of a catching blanket and the effect of a reflector in the proposed converter reactor."

The primary purpose of this joint USAEC-Euratom program is to obtain a better understanding of the maximum achievable operating characteristics of UO2 as a reactor fuel. During the program work will be performed in two areas that have been of concern to reactor core designers for a long time, namely, fission gas release and central melting in fuel rods.

This technical report is the second of a series which concerns the separation of ions by solvent extraction with trialkyl phosphine oxides (TOPO). This investigation has consisted in the extraction of various ions from acidic solutions with extractants that are representative of these ore specific phosphine oxides - triphenylphosphine oxide (THPO) and tris-2-ethylhexylphosihine oxides (TEHPO). In general it is observed that: (a) the order of increasing capacity of extraction is THPO > TOPO >TEHPO. (b) No ion is extracted by THPO or TEHPO that is not extracted by TOPO under certain conditions. (c) The effect of hydrogen ion concentration is greater in TEHPO systems than it is in the other two, which indicated greater selectivity of extraction with TEHPO.

Techniques are described for determining U-235 abundance by measurement of the intensity of 0.18 Mev gamma radiation. One method involves measurement of the ratio of the intensity of 0.18-Mev radiation to that of 0.1 Mev radiation. The preferred technique consists of chemical separation of uranium followed by direct counting of 0.18-Mev photons. Application has been made in analysis of uranium samples of abundances in the range of 0.05% to 93%. Accuracy appears to be better than 3% if the abundance is between 0.7% and 100%. Findings in the self-absorption of 0.18 Mev radiation in uranium oxide are presented.