Report issued by the U.S. Bureau of Mines on the drilling for copper deposits near Pinal County, Arizona in 1949. Topographic and geologic mapping, drilling, and field tests were studied. Tables, maps, and illustrations are presented.

Report issued by the Bureau of Mines over studies on the zinc-lead mines in Mohave County, Arizona. Descriptions of the characteristics, development, and production of the ore are presented. This report includes tables, maps, and illustrations.

Report issued by the U.S. Bureau of Mines on energy consumption in the western United States. A focus on coal as the primary energy source is presented. This report includes tables, graphs, maps, and illustrations.

Report issued by the Bureau of Mines over tungsten deposits of Arizona. Characteristics of the tungsten deposits are discussed. This report includes tables, maps, and illustrations.

Report issued by the Bureau of Mines over drilling and sampling of the San Manuel copper mine in Arizona. Properties of the drill samples are presented. This report includes tables, maps, and illustrations.

Report issued by the Bureau of Mines over studies conducted on the geologic factors related to block-caving. The results of the study are presented. This report includes tables, maps, and illustrations.

Abstract: This U. S. Bureau of Mines (USBM) report presents results of stress analyses and field observations to investigate the effects of elevated trench drifts on the structural stability of rock mass zones surrounding a production draw drift in a mine utilizing a mechanized load-haul-dump (LHD) trench undercut panel caving system. A two-dimensional boundary-element mine stress model was developed to predict the locations and extent of damaged rock mass zones surrounding draw drifts where adjacent, parallel trench drifts are either elevated or not elevated above the LHD production draw drift level. A Mohr-Coulomb shear-failure criterion was obtained directly from in situ borehole shear test data. Hoek-Brown shear-failure parameter values were computed from borehole-shear and triaxial test data. A procedure is described to estimate these parameters when a rock mass rating (RMR) value and triaxial data on intact samples exist, and no borehole shear test data exist. Results indicate that trench drifts, elevated to the level equal to the height of the LHD production draw drift, would not minimize material damage nor significantly enhance the stability of rib and crown pillar zones surrounding production draw drifts in the mechanized LHD trench undercut caving panel investigated at this mine.

Abstract: The first step in determining whether Mn can be recovered by in situ leaching is to develop and test a selective lixiviant. Two column leach tests and one core leach test were conducted by the U.S. Bureau of Mines on Mn oxide ore using aqueous sulfur dioxide (SO2) as the lixiviant. The column tests showed that aqueous SO2 could selectively dissolve available Mn oxides from calcite-rich ore in a heap leach system. However, the core test showed that calcite gangue side reactions can have pronounced negative effects on the likelihood of successful in situ leaching of a calcite-rich ore with aqueous SO2. Petrographic and geochemical analyses showed that both Mn (IV, II) oxides and calcite were dissolved. The abundance of dissolved Ca caused precipitation of gypsum. Acid consumption by calcite dissolution caused a rise in pH that caused the S02/S species to shift to SO32- (sulfite), which hindered reductive dissolution of Mn oxide. Gypsum precipitation did not affect complete leaching of the rock fragments in the column tests; however, it plugged the natural permeability in the core. Manganese recoveries were high for the column tests and low for the core test.