This document consists of tables of the materials that make up the ''wetted'' parts of the 219-S waste handling facility and a combination of manufacturer lists of chemicals that are not recommended.

242-A Evaporator distributive control system upgrade to D/3 version 9.0-2 for year 2000 compliance. Testing was performed per test procedure HNF-3568. There were no unresolved exceptions. The system responded correctly to all testing and meets the requirements to operate the 242-A This report documents the acceptance test results for the Evaporator facility.

This report documents acceptance test results for the 242-A Evaporator distributive control system upgrade to D/3 version 9.0-2 for year 2000 compliance. This report documents the test results obtained by acceptance testing as directed by procedure HNF-2695. This verification procedure will document the initial testing and evaluation of the potential 242-A Distributed Control System (DCS) operating difficulties across the year 2000 boundary and the calendar adjustments needed for the leap year. Baseline system performance data will be recorded using current, as-is operating system software. Data will also be collected for operating system software that has been modified to correct year 2000 problems. This verification procedure is intended to be generic such that it may be performed on any D/3{trademark} (GSE Process Solutions, Inc.) distributed control system that runs with the VMSTM (Digital Equipment Corporation) operating system. This test may be run on simulation or production systems depending upon facility status. On production systems, DCS outages will occur nine times throughout performance of the test. These outages are expected to last about 10 minutes each.

In this paper, we have presented the relative advantages and complementary aspects of acoustic and seismic ground sensors. A detailed description of both acoustic and seismic ground sensing methods has been provided. Acoustic and seismic phenomenology including source mechanisms, propagation paths, attenuation, and sensing have been discussed in detail. The effects of seismo-acoustic and acousto-seismic interactions as well as recommendations for minimizing seismic/acoustic cross talk have been highlighted. We have shown representative acoustic and seismic ground sensor data to illustrate the advantages and complementary aspects of the two modalities. The data illustrate that seismic transducers often respond to acoustic excitation through acousto-seismic coupling. Based on these results, we discussed the implications of this phenomenology on the detection, identification, and localization objectives of unattended ground sensors. We have concluded with a methodology for selecting the preferred modality (acoustic and/or seismic) for a particular application.

None

Testing activities on the Prototype Vertical Denitration Calciner at PFP were suspended in January 1997 due to the hold on fissile material handling in the facility. The restart of testing activities will require a review through an activity based startup process based upon Integrated Safety Management (ISM) principles to verify readiness. The Activity Based Startup Plan has been developed for this process.

The Z-accelerator facility at Sandia National Laboratories (SNL) in Albuquerque, New Mexico, performs critical experiments on the physics of matter at extremely high energy density as part of the Department of Energy's nuclear weapons Stockpile Stewardship Program. In order to augment and enhance the value of experiments performed at this facility, the construction of a new x-ray backlighting diagnostic system is required. New information would be obtained by recording images and/or spectra of x-ray radiation transmitted through target materials as they evolve during Z-accelerator-driven experiments (or ''shots''). In this application, we generally think of the diagnostic x-rays as illumination produced behind the target materials and detected after passing through the Z-target. Hence the x-ray source is commonly called a ''backlighter.'' The methodology is a specific implementation of the general science known as x-ray radiography and/or x-ray spectroscopy. X-ray backlighter experiments have been performed in inertial confinement fusion (ICF) facilities in many countries. On Nova, experience with backlighters has been obtained since about 1986. An intense source of x-rays is produced by focusing one of its beams on a backlighter target nearby, while the other beams are used to create the high-energy-density conditions to be studied in the experiment. This conceptual …

Application of nanotechnology and advanced optical structures offer new possibilities for improved radiation tolerance in silicon solar cells. We describe the application of subwavelength diffractive structures to enhance optical absorption near the surface, and thereby improve the radiation tolerance.

The objectives of the program are to provide an improved Thermal Barrier Coating (TBC) system with increased temperature capability and improved reliability relative to current state of the art TBC systems. The development of such a coating system is essential to the ATS engine meeting its objectives. The base program consists of three phases: Phase I: Program Planning - Complete; Phase II: Development; and Phase III: Selected Specimen - Bench Test Work is being performed in Phase II and III of the program.

The Pennsylvania State University program in advanced thermally stable coal-based jet fuels has five broad objectives: (1) Development of mechanisms of degradation and solids formation; (2) Quantitative measurement of growth of sub-micrometer and micrometer-sized particles suspended in fuels during thermal stressing; (3) Characterization of carbonaceous deposits by various instrumental and microscopic methods; (4) Elucidation of the role of additives in retarding the formation of carbonaceous solids; (5) Assessment of the potential of production of high yields of cycloalkanes by direct liquefaction of coal. Future high-Mach aircraft will place severe thermal demands on jet fuels, requiring the development of novel, hybrid fuel mixtures capable of withstanding temperatures in the range of 400--500 C. In the new aircraft, jet fuel will serve as both an energy source and a heat sink for cooling the airframe, engine, and system components. The ultimate development of such advanced fuels requires a thorough understanding of the thermal decomposition behavior of jet fuels under supercritical conditions. Considering that jet fuels consist of hundreds of compounds, this task must begin with a study of the thermal degradation behavior of select model compounds under supercritical conditions. The research performed by The Pennsylvania State University was focused on five major …

This report describes the work of developing an integrated model used to predict the thermal history, deformation, roll forces, microstructural evolution and mechanical properties of steel strip in a hot-strip mill. This achievement results from a joint research effort that is part of the American Iron and Steel Institute's (AIS) Advanced Process Control Program, a collaboration between the U.S. DOE and fifteen North American Steelmakers.

Augmentation of the internal software of a commercial X-ray fluorescence gauge is shown to enable the instrument to extend its continuous on-line real-time measurements of a galvanneal coating's total elemental content to encompass similar measurements of the relative thickness of the coating's three principal metallurgical phases. The mathematical structure of this software augmentation is derived from the theory of neural networks. The performance of the augmented gauge is validated by comparing the gauge implied real-time phase distribution with the phase distribution independently measured off-line on between the gauge and laboratory measurements and to suggest preferred approaches to be followed in future application of the augmented gauge.

The Advanced Photon source (APS) is a 7 GeV, third-generation synchrotron radiation source. To provide more stable beam for users, they are pursuing a new operating mode called top-up. In this mode, the beam current is not allowed to decay as it normally would, but instead is maintained at a high level through frequent injection. A safety question with top-up mode is, during injection with photon shutters open, can injected beam ever exit a photon beamline? This might happen, for example, due to a full or partial short of a dipole coil. The authors discuss a number of analytical calculations that can be used to quickly assess top-up safety for a general ring. They also apply these results to the specific case of the APS. A companion paper in this conference discusses detailed tracking procedures for assessing safety.

This report presents a statistical method of evaluating geometric tolerances of casting products using point cloud data generated by coordinate measuring machine (CMM) process. The focus of this report is to present a statistical-based approach to evaluate the differences in dimensional and form variations or tolerances of casting products as affected by casting gating system, molding material, casting thickness, and casting orientation at the mold-metal interface. Form parameters such as flatness, parallelism, and other geometric profiles such as angularity, casting length, and height of casting products were obtained and analyzed from CMM point cloud data. In order to relate the dimensional and form errors to the factors under consideration such as flatness and parallelism, a factorial analysis of variance and statistical test means methods were performed to identify the factors that contributed to the casting distortion at the mold-metal interface.

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a legislative requirement, GAO discussed its report on the U.S. government's financial statements for fiscal year 1998, focusing on the importance of improving how federal departments and agencies manage the finances of the national government."

Autoramp is an atmospheric radionuclide collection and analysis unit designed for unattended operation. A large volume of air passes through one of 31 filter cartridges which is then moved from a sampling chamber and past a bar code reader, to a shielded enclosure. The collected dust-borne radionuclides are counted with a high resolution germanium gamma-ray detector. An analysis is made and the results are transmitted to a central station that can also remotely control the unit.

The purpose of this research is to develop a multiplexed sample processing system in conjunction with multiplexed capillary electrophoresis for high-throughput DNA sequencing. The concept from DNA template to called bases was first demonstrated with a manually operated single capillary system. Later, an automated microfluidic system with 8 channels based on the same principle was successfully constructed. The instrument automatically processes 8 templates through reaction, purification, denaturation, pre-concentration, injection, separation and detection in a parallel fashion. A multiplexed freeze/thaw switching principle and a distribution network were implemented to manage flow direction and sample transportation. Dye-labeled terminator cycle-sequencing reactions are performed in an 8-capillary array in a hot air thermal cycler. Subsequently, the sequencing ladders are directly loaded into a corresponding size-exclusion chromatographic column operated at {approximately} 60 C for purification. On-line denaturation and stacking injection for capillary electrophoresis is simultaneously accomplished at a cross assembly set at {approximately} 70 C. Not only the separation capillary array but also the reaction capillary array and purification columns can be regenerated after every run. DNA sequencing data from this system allow base calling up to 460 bases with accuracy of 98%.

Project W-059 installed a new B Plant Canyon Ventilation System. Monitoring and control of the system is implemented by the Canyon Ventilation Control System (CVCS). This document describes the CVCS system components which include a Programmable Logic Controller (PLC) coupled with an Operator Interface Unit (OIU) and application software. This document also includes an Alarm Index specifying the setpoints and technical basis for system analog and digital alarms.

The continental slope off Cape Hatteras, N.C. from approximately 36{degree} 00 minutes N to 35{degree} 20 minutes N is a region of relatively rapid sediment accumulation, organic matter deposition and subsequent remineralization. The measured fluxes are the highest reported for the slope off the eastern US Sediment accumulation rates range from 40 to 140 cm ky{sup -1}. Organic carbon deposition rates range from 3.5 to 7.4 moles C m{sup -2} yr{sup -1}. The areal coverage of this ''depocenter'' is probably controlled by interactions between physical oceanographic processes and the rugged topography of the seafloor. The organic matter deposited on the seafloor is primarily marine in origin and a mix of old and fresh particles. 73-93% of the depositing detritus is rapidly oxidized near the sediment/water interface. The controls on subsurface remineralization appear to be a complex function of the relative amount of metabolizable carbon delivered to the seabed both now and in the distant past (>=500ybp) and the extent of seabed irrigation. The age of DIC and CH{sub 4} produced within the seabed indicates that relatively young, reactive carbon is advected below the sediment surface and fuels subsurface remineralization. The stable isotopic composition of DIC produced within the seabed indicates …

The primary objective of this project is to demonstrate the ability of hydrogen to supply reducing equivalents for the reductive dehalogenation of perchloroethylene (PCE). This objective will be accomplished by two types of activities. First, laboratory experiments will compare the kinetics of hydrogen-mediated dehalogenation with natural routes of loss (hydrolysis and natural attenuation). Secondly, bench-scale column experiments will be performed to demonstrate hydrogen-mediated reductive dehalogenation in aquifer sediments.

This Calculation Note provides a conservative estimate of the grams of plutonium released from Building 2736-ZB of the Plutonium Finishing Plant as a result of a fire within Glovebox 636, without consideration of mitigation.

Correspondence issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO provided information on the capital structure of the Federal Home Loan Bank System."

Within the framework of the International Energy Agency Hydrogen Implementing Agreement, Task 11 was undertaken to develop tools to assist in the design and evaluation of existing and potential hydrogen demonstration projects. Emphasis was placed on integrated systems, from input energy to hydrogen end use. Included in the PDF document are the Executive Summary of the final report and the various case studies. The activities of task 11 were focused on near- and mid-term applications, with consideration for the transition from fossil-based systems to sustainable hydrogen energy systems. The participating countries were Canada, Italy, Japan, the Netherlands, Spain, Switzerland and the United States. In order for hydrogen to become a competitive energy carrier, experience and operating data need to be generated and collected through demonstration projects. A framework of scientific principles, technical expertise, and analytical evaluation and assessment needed to be developed to aid in the design and optimization of hydrogen demonstration projects to promote implementation. The task participants undertook research within the framework of three highly coordinated subtasks that focused on the collection and critical evaluation of data from existing demonstration projects around the world, the development and testing of computer models of hydrogen components and integrated systems, and …

The Paducah Gaseous Diffusion Plant (PGDP) operated by the Department of Energy is challenged with selecting the appropriate remediation technology to cleanup contaminants at Waste Area Group (WAG) 6. This research utilizes value-focused thinking and multiattribute preference theory concepts to produce a decision analysis model designed to aid the decision makers in their selection process. The model is based on CERCLA's five primary balancing criteria, tailored specifically to WAG 6 and the contaminants of concern, utilizes expert opinion and the best available engineering, cost, and performance data, and accounts for uncertainty in contaminant volume. The model ranks 23 remediation technologies (trains) in their ability to achieve the CERCLA criteria at various contaminant volumes. A sensitivity analysis is performed to examine the effects of changes in expert opinion and uncertainty in volume. Further analysis reveals how volume uncertainty is expected to affect technology cost, time and ability to meet the CERCLA criteria. The model provides the decision makers with a CERCLA-based decision analysis methodology that is objective, traceable, and robust to support the WAG 6 Feasibility Study. In addition, the model can be adjusted to address other DOE contaminated sites.