Two solar collectors using a pebble bed design were constructed and tested using air as the heat exchange media. One collector had pebbles of metallurgical grade coke, and the other had a frothy volcanic material called scoria. The highly irregular surface of such vesicular material should increase the path distance for the air and the surface exposed cavities should give some honeycomb effect. Both should yield greater efficiency. Actual testing shows the efficiencies to be comparable with other air collectors. Thus the advantages of the pebble bed lie in the availability of the bed material, its thermal and radiation stability, and its shielding of underlying collector materials from ultraviolet radiation. Several pebble bed collectors using water as the heat exchange media were constructed. However, basic problems prevented effective testing, and it is concluded that pebble bed collectors using water are impractical.

Experimental and theoretical research on production of negative ion beams is described. Results from a double charge-exchange experiment include 10 ms pulses of 100 ma of D/sup -/ accelerated to 60 kV. Equilibrium fractions of D/sup -/ in several metal vapors are presented. Mechanisms and measurements of D/sup -/ on surfaces are described, and a scheme is shown for producing high current, high energy beams originating on surfaces.

A coil winder was designed for the purpose of fabricating the superconducting magnets of the Mirror Fusion Test Facility. The superconducting magnets are a displaced ying-yang pair, each having major and minor radii of 2.5 and 0.75 m, respectively, and cross section of 0.42 m by about 1.03 m. The superconductor cross section is a square, 13 mm on a side, and consists of a core of niobium-titanium embedded copper and a solid copper stabilizer. Conceptual studies made at Lawrence Livermore Laboratory of the coil winder resulted in concept drawings and a procurement specification. Final design was made by the contractor, and the coil winder is now in fabrication. This paper describes the performance requirements of the winder, and the evolution of its design from conceptual stage to completion.

The effect of introducing a neutron and gamma shield into the annulus between the reactor vessel and the shield tank is analyzed. This addition has been proposed in order to intercept neutron streaming up the annulus during nuclear operations. Its installation will require removal of approximately 20-/sup 1///sub 2/ inches of stainless steel foil insulation at the top of the annulus. The resulting conduction path is believed to result in increased water temperatures within the shield tank, possibly beyond the 150/sup 0/F limit, and/or cooling of the reactor vessel nozzles such that adverse thermal stresses would be generated. A two dimensional thermal analysis using the finite element code COUPLE/MOD2 was done for the shield tank system illustrated in the figure (1). The reactor was assumed to be at full power, 55 MW (th), with a loop flow rate of 2.15 x 10/sup 6/ lbm/hr (268.4 kg/s) at 2250 psi (15.51 MPa). Calculations indicate a steady state shield tank water temperature of 140/sup 0/F (60/sup 0/C). This is below the 150/sup 0/F (65.56/sup 0/C) limit. Also, no significant changes in thermal gradients within the nozzle or reactor vessel wall are generated. A spacer between the gamma shield and the shield tank …

Glazed pottery known as ''Afrasiyab'' and ''Nishapur'' wares (early Islamic ceramics) are generally attributed to the Samanid dynasty (819-1005). The clay composition of Samanid wares and discarded kiln items found in situ were analyzed by NAA and the elemental composition compared with that of other sherds. 7 figures, 1 table. (DLC)

A compact and maintainable source of 80-keV neutral beams that focus to a high power density is required for the Mirror Fusion Test Facility (MFTF). In the new source being designed and built to meet these requirements, the cross-sectional area is reduced in two ways: by immersing the source in a vacuum where high voltage can be held over smaller distances and by redesigning grid supporting structures. Reliability is increased by reducing the electric fields everywhere else below those present between grids and by design innovations. The latter include techniques to reduce stray magnetic field and disperse gas uniformly, all metal-ceramic construction, and a 60-kV shield enclosing all 80-kV electrodes. Wherever possible, we have attempted to simplify the construction. We expect to solve problems that arise during testing either with add-on fixes or with the techniques already tested successfully on the Lawrence Berkeley Laboratory (LBL) 120-keV source. Easy maintenance is obtained by a compact isolation valve and by modular construction. Curving both the grid wires and their holders provides focusing in two planes.

Apparatus is described for rapidly manipulating a hollow glass microsphere laser fusion target and scanning the entire wall with a double pass interference microscope.

Lawrence Livermore Laboratory (LLL) designed a cost-effective, regulated 15-V, 7500-A filament supply for use with the High-Voltage Test Stand , a major ERDA developmental neutral-beam test facility. The filament supply can float to 200 kV and can provide pulse widths up to 30 s. Powered by a 24-V, 0.5-TJ battery bank, it avoids the use of expensive isolation transformers and induction voltage regulators (IVR's). Battery output is regulated by a water-cooled resistor-contactor combination in which contactors are closed in sequential format to create a staircase current waveform. A fine-tuning network tunes in-between the ''steps'' for regulation to less than 0.5 percent. The regulator is digitally controlled except for the sense amplifiers, which are optically coupled to the digital controller. All ground telemetry uses optical links to minimize effects of rfi and emi noise in the data channels.

The present study indicates that the estimation of the gamma-ray strength function is the approach least subject to error when unmeasured capture cross sections are to be computed. An estimate is given for the /sup 88/..gamma..(n,..gamma..) cross section.

When designing a capacitor bank for energy storage, the engineer should not use more capacitors, voltage, or energy than necessary to supply the load and to overcome losses. Universal curves presented here aid the designer in making intelligent choices. For example, there is a minimum stored energy to be achieved, but no minimum voltage at which to store it. Included in the curves are the effects of series losses such as voltage drops in regulator tubes or in current-limiting resistors. Capacitor bank designs for the neutral-beam power supplies on 2XIIB and TMX are compared using the developed criteria.

The objective of the work reported here was to develop a model which could be used to assess the economic effects of energy-conservative technological innovations upon the pipeline industry. The model is a dynamic simulator which accepts inputs of two classes: the physical description (design parameters, fluid properties, and financial structures) of the system to be studied, and the postulated market (throughput and price) projection. The model consists of time-independent submodels: the fluidics model which simulates the physical behavior of the system, and the financial model which operates upon the output of the fluidics model to calculate the economics outputs. Any of a number of existing fluidics models can be used in addition to that developed as a part of this study. The financial model, known as the Systems, Science and Software (S/sup 3/) Financial Projection Model, contains user options whereby pipeline-peculiar characteristics can be removed and/or modified, so that the model can be applied to virtually any kind of business enterprise. The several dozen outputs are of two classes: the energetics and the economics. The energetics outputs of primary interest are the energy intensity, also called unit energy consumption, and the total energy consumed. The primary economics outputs are …

In response to additional needs developed during a review of the LOFT Technical Specifications, two more pressure reduction and decontamination sump volume vs. initial temperature data points were calculated in order to adequately quench steam generator relief blowdown. The two additional points chosen were for 10,000 gallons (based on ECC requirements) and for 120/sup 0/F (NPSH limit maximum temperature). The results are that for 10,000 gallons in the sump the maximum initial temperature is 110/sup 0/F and for 120/sup 0/F initial temperature, a volume of 14,000 gallons is required in the sump. Calculations are shown on page two of this report. The maximum final PR and DS temperature was set at 140/sup 0/F to preclude the vibrational effects discussed in LTR 115-9 and its referenced operational experience reports.

Purex Sludge Supernatant (PSS) contains significant amounts of /sup 137/Cs left after removal of strontium from fission product bearing Purex wastes. To remove cesium from PSS, an Ion Exchange Recovery system has been set up in Cells 17-21 at B Plant. The cesium that is recovered is stored within B Plant for eventual purification through the Cesium Purification process in Cell 38 and eventual encapsulation and storage in a powdered form at the Waste Encapsulation Storage Facility. Cesium depleted waste streams from the Ion Exchange processes are transferred to underground storage.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification; Constitutionality of H. B. 228 which proposes to authorize loans from the Texas Opportunity Plan Fund to students attending foreign medical schools.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification: Whether article 1011m, section 8, V.T.C.S., violates article 1, section 10 of the United States Constitution.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification: Constitutionality of Fire and Police Employee Relations Act.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification: Authority of Railroad Commission to prohibit contract provisions limiting the liability of an LPG dealer.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification: Subpoena fees in misdemeanor cases.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification; Interpretation of the motor vehicle inspection statute in light of two amendments to the Act passed by the 65th Legislature.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification: Use of county law library funds to renovate or build a building.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification: Constitutionality of House Bill 22 permitting an income capitalization valuation of open space land used for agricultural purposes.

ORCODE.77 is a versatile data-handling computer routine written in MACRO (assembler) language for a PDP-15 computer with EAE (extended arithmetic capability) connected to a CAMAC interface. The Interrupt feature of the computer is utilized. Although the code is oriented for a specific experimental problem, there are many routines of general interest, including a CAMAC Scaler handler, an executive routine to interpret and act upon three-character teletype commands, concise routines to type out double-precision integers (both octal and decimal) and floating-point numbers and to read in integers and floating-point numbers, a routine to convert to and from PDP-15 FORTRAN-IV floating-point format, a routine to handle clock interrupts, and our own DECTAPE handling routine. Routines having specific applications which are applicable to other very similar applications include a display routine using CAMAC instructions, control of external mechanical equipment using CAMAC instructions, storage of data from an Analog-to-digital Converter, analysis of stored data into time-dependent pulse-height spectra, and a routine to read the contents of a Nuclear Data 5050 Analyzer and to prepare DECTAPE output of these data for subsequent analysis by a code written in PDP-15-compiled FORTRAN-IV.

The DT fusion neutron irradiation of eleven BNL-LASL superconductor wires, one BPNL wire-foil packet, and two ORNL magnesium oxide crystals is described. The sample position and neutron dose record are given. The maximum neutron fluence on any sample was 2.77 x 10/sup 15/ neutrons/cm/sup 2/.