A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

The success of any Inertial Confinement Fusion system for the production of useful power depends critically on the production of suitable targets. This is true whether the arrangement is that proposed by Nuckolls et al. or some other arrangement. The target must have characteristics such as material composition, structure, and surface finish which are tailored to the laser pulse length, energy, peak and average power and pulse shape. To provide useful power on a continuous basis, it is likely that the repetition rate will be 1.0 to 10 per second. Thus, in a 24 hour running period 864,000 targets may be necessary and one must be placed at the focal point of the laser every tenth of a second. For economic operation it is necessary that the targets be produced at costs of less than $1.00 per target.

This report surveys difficulties in establishing valid estimates concerning the cost of federal regulations.

Ths document is an integral part of the Kilowatt Isotope Power System (KIPS) Program Plan. This document defines the KIPS Reliability Program Plan for the Technology Verification Phase. This document delineates the reliability assurance tasks that are to be accomplished by Sundstrand and its suppliers during the design, fabrication and testing of the KIPS.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification; Authority of a county under the Airport Zoning Act.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Rubidium fluoride and niobium metal-containing foam samples (rods and sheets) were prepared using two foam sytems: (1) hydrophilic polyurethanes prepared from W.R. Grace Co.'s Hypol prepolymers and (2) polyimides prepared from Monsanto Company's Skybond polyimide resin. The first system was used only for preparation of rubidium fluoride-containing foams while the second was used for both rubidium fluoride and niobium-containing foams. The niobium metal could readily be incorporated into the polyimide foam during molding, to produce foam sheets of the required dimensions and density. The rubidium fluoride-containing polyimide foams were preferably prepared by first rendering the molded polyimide foam hydrophilic with a postcuring treatment, then absorbing the rubidium fluoride from water solution. Similarly, rubidium fluoride was absorbed into the hydrophilic polyurethanes from water solution. Since the high reactive rubidium metal could not be employed, rubidium fluoride, which is very hygroscopic, was used instead, primarily because of its high rubidium content (approximately 82 weight percent). This was important in view of the low total densities and the high weight percentage rubidium required in the foam samples. In addition, at the later request of LLL, a block of rigid Hypol hydrophilic polyurethane foam (with a density of approximately 0.04 g/cm/sup 3/ and cell …

The organizing philosophy and components of a target diagnostics data acquisition system designed and implemented at the Lawrence Livermore Laboratory (LLL) Shiva Laser Fusion Facility are described. Several features of the system are unique: a central trigger distribution system, fiber optic communications, and fiber optics for the timing, trigger, and control and monitoring links. The system also uses CAMAC instrumentation, transient digitizers, oscilloscopes, and LLL-designed modules and packages, as well as single-point grounding of each diagnostic installation. Distributed instrumentation packages provide instrumentation flexibility and analog-to-digital conversion as close to each diagnostic sensor as practical.

From abstract: Results of a reconnaissance geochemical survey of the Oklahoma City Quadrangle, Oklahoma are reported. Field and laboratory data are presented for 812 groundwater samples and 847 stream sediment samples. Statistical and areal distributions of uranium and other possibly uranium-related variables are displayed. A generalized geologic map of the survey area is provided, and pertinent geologic factors which may be of significance in evaluating the potential for uranium mineralization are briefly discussed.

Data collected as part of hydrogeochemical and stream sediment reconnaissance data for Oklahoma City NTMS quadrangle including laboratory data on well water, spring water, and stream sediments as well as field data.

A brief but comprehensive summary of a conceptual design for an OTEC platform is presented. In the first phase studies, an evaluation methodology was developed for analyzing the ocean system requirements against site criteria and a final evaluation of integrated OTEC commercial platform candidates was performed. A ranking of candidate platforms was obtained as the end result. For Phase-II studies, M. Rosenblatt and Son, Inc. project team was given the SPAR and SPHERE platforms to perform not only the conceptual designs for, but also cost and time schedules and sensitivity analyses. The commercial plant size was specified to be 400 MWe (net). All conceptual design work was performed for the baseline site on West Coast of Florida. The cost differentials and other considerations involved with deploying the platforms in the New Orleans and Puerto Rico sites were also determined. A demonstration plant of 100 MWe (net) capacity, to fill the gap between test platforms and commercial plants, was also investigated, and a project plan was developed. As an end product of the complete study, the costs for the SPAR and the SPHERE platforms are reported both in terms of acquisition costs in 1978 dollars and life cycle costs in dollars …

The Plutonium(IV) Oxalate Precipitation and Calcination Process for converting plutonium nitrate to plutonium oxide is described for a 100-kg plutonium per day (Pu/day/ throughput facility. Block flow diagrams, equipment flowsheets, and stream material balances are included. Advantages and disadvantages of the process, additional research and development necessary, and history of the process are also discussed. This report is one of a series describing various processes for converting plutonium nitrate to oxide. This information in this report should be used when comparing the various processes, and as a starting point for development of a prototype or plant-scale facility.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification; Whether article 21.48A, Insurance Code, prohibits a lender from refusing to accept property insurance policies from a company.

The activities associated with the procurement of the materials for the screening test program, information from vendor certification for the materials received, and preliminary information from the materials characterization tests performed by GE are reported. The construction status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment are discussed. The final recommended impurity levels for the screening phase helium are presented and the rational behind this gas chemistry is discussed. The status of the data management system is presented.

This report is an analysis of the President's Federal Water Policy initiatives of June 6, 1978. Recommendations were made on conservation, cost-sharing, planning procedures, and environmental protection.

A single-laboratory evaluation and an interlaboratory collaborative study were made of a method for determining plutonium in water. The method was written for the analysis of one-liter samples and involves coprecipitation, acid dissolution, anion exchange, electrodeposition, and alpha pulse height analysis. After the single-laboratory evaluation of the selected method, four samples were prepared for the collaborative study: two river-water samples, a substitute ocean water sample, and sample containing sediment. These samples contained plutonium-239 and plutonium-238 at concentrations ranging from 0.42 to 28.9 dis/min/liter. In the collaborative study standard deviations of plutonium concentrations ranged from 5 to 13%. In three cases, standard deviations agreed with those expected from counting statistics. It is believed that hydrolysis occurred in the river water samples resulting in errors greater than those expected from counting statistics.

Measurements of the dilution of air contaminants between worker breathing zone and area air samplers were made by releasing a test aerosol in a workroom equipped with an aerosol surveillance system. The data were used to evaluate performance, and suggest improvements in design of the workroom's alarming air monitor system. It was found that a breathing zone concentration of 960 times the maximum permissible concentration in air (MPC/sub a/) for a half-hour was required to trigger alarms of the existing monitoring system under some release conditions. Alternative air monitor placement, suggested from dilution measurements, would reduce this average triggering concentration to 354 MPC/sub a/. Deployment of additional air monitors could further reduce the average triggering concentration to 241 MPC/sub a/. The relation between number of monitors and triggering concentration was studied. No significant decrease in average triggering concentration was noted for arrays containing greater than five monitors.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John L. Hill, regarding a legal question submitted for clarification; Whether a completed compromise settlement agreement constitutes a claim for compensation within article 8307 section 9a(e)(2),V.T.C.S

Quantitative estimates of charge exchange (CE) losses during acceleration are very important in the design and operation of heavy ion cyclotrons. Such estimates have been made using a vacuum model computer code which was developed to establish vacuum requirements for the MSU superconducting heavy ion cyclotron. This code uses pressure and cross-section data to calculate the radial loss of beam due to charge exchange. Since CE cross sections and radial pressure profiles are not always well known, certain specific measurements have been made using the LBL 88-Inch Cyclotron to provide experimental data needed to test the code. These include measurements of pressure versus radius under vacuum conditions closely approximating those existing during acceleration of /sup 14/N/sup 4 -/ and /sup 40/Ar/sup 8 -/ beams. Beam intensity versus radius data demonstrating transmission losses for three beams are presented. Comparisons with theoretical predictions are given.

LOFCON is a program developed for the LOFT air condenser system contained in the secondary coolant system. Although the basic theory described herein is general, the program given is not--it is specifically for the LOFT configuration. LOFCON is presented in subroutine form so that it may be easily incorporated into a larger program describing the complete secondary side. Specifically LOFCON was written to be incorporated into the detailed CSMP model of the LOFT secondary coolant system simulation.

The Field Reversed Mirror Reactor is composed of a horizontal linear chain of cells, each of which requires neutral beam injection. Blanket replacement is achieved by lifting one complete cell module from the reactor and replacing it with a preassembled and tested identical module. Ioffe bar connectors eliminate redundant bus bars. Asymmetric cell design simplifies magnet construction and reduces replacement time. A tapered cylindrical coolant distributor simplifies blanket removal. An evacuated housing surrounds the reactor reducing cell-to-cell sealing problems related to maintenance. Remote couplings are used for coolant and accessories. Hot-cell location and design permits immediate reconditioning or storage of replacement cells.

The nuclear design analysis and performance of the blanket for the Pu/sup 239/ producing standard mirror hybrid is discussed. The blanket is based on present day materials and technology. It is designed for peak power density and burnup in the uranium fuel of 500 W/cc and 3 atom percent. The blanket produces 2.0 Mg/yr of Pu-239 (net) from 400 MW fusion (D-T) and depleted uranium and has an average energy multiplication of 11.

Reduced instrument responses are presented for Thermal-Hydraulic Test Facility (THTF) test 167R, which is part of the ORNL Pressurized-Water Reactor (PWR) Blowdown Heat Transfer Separate-Effects Program. The objective of the program is to investigate the thermal-hydraulic phenomenon governing the energy transfer and transport processes that occur during a loss-of-coolant accident in a PWR system. Test 167R was conducted to obtain thermal-hydraulic and CHF information in THTF bundle 1 with an intact cold leg. The primary purpose of this report is to make the reduced instrument responses during test 167R available. These are presented in graphical form in engineering units and have been analyzed only to the extent necessary to ensure reasonableness and consistency.

This report