Report presenting a discussion of the adverse effects of high compression ratio requirements for supersonic wind tunnels as well as the use of second throats for alleviating those effects. The results indicated that an auxiliary air-injector system can reduce starting and running compression ratios as compared to a conventional wind tunnel with a divergent diffuser.

The first series of tests in the KER-REP-1 loop proved that a fission product contaminated loop could be decontaminated to a safe level for contact maintenance. Since a good decontamination process was available, there was much that could be improved about this process. Further testing of this process and several variations of other processes have been scheduled. The evaluation of these processes includes specific decontamination factors, process corrosion, and loop activity reduction factors (loop decontamination factors).

The development of a remotely operated device for determining the coalescence times of plant process streams suspected of containing surfactants such as silicic compounds and fission product zirconium compounds is described. A general correlation between the coalescence times of pilot plant extraction column aluminum nitrate feeds and 3.25 percent tributyl phosphate extractant streams and the observations of column behavior of these streams is demonstrated. The application of the coalescence test to plant streams is given. (auth)

Report presenting data from an investigation of the effects of slot location and slot geometry on the flow in a square tunnel for a Mach number range up to 1.4. Calculated static-pressure and angle-of-flow distributions along the slotted boundary are presented for several slot configurations in a tunnel with two opposite walls slotted.

Report presenting testing of two types of solid fuels in a 6.5-inch-diameter ram-jet engine mounted in a free supersonic jet at several Mach numbers. Results regarding radial-burning fuel, end-burning fuel, and a comparison of the two are provided. Unlike in previous testing, no fuel breakup was noted due to recently developed molding techniques.

It is the objective of this study to investigate preliminary expansion program requirements for process water, as supplied by 190 Building equipment; from the point of view of practical pumping, flywheel and pump suction head requirements. These requirements are to be determined at this time in such a form and accuracy as to be useful in refined estimating for budget study purposes. In order to obtain the objectives of this study at this time it has been decided to consider five different conditions of process water flow to a reactor. These conditions are flow to the reactor under summer conditions of operation in gallons per minute with a corresponding top of riser pressure in pounds per square inch: 85,000 gal/min, 580 psi; 100,000 gal/min, 480 psi; 130,000 gal/min, 280 psi; 150,000 gal/min, 280 psi; and 150,000 gal/min, 150 psi.

An earlier report suggested a double headwave method of generating a rarefaction first motion. In this method a geologic situation is selected so that energy that has been critically refracted once above the shot and once below shot arrives first. Since the theory of headwaves gives in the usual stationary phase approximation a ninety degree phase shift for each critical refraction, energy that has been critically refracted twice produces a 180 degree phase shift. Oil well data was presented to show that the necessary geologic situation exists in nature. A question has come up regarding the propagation of long wave lengths (16,000 ft) in the thin bed (3000 ft.) above the shot in the geologic situation cited in the earlier report. At the tine of writing of the report it was realized that the thickness of the bed should be considered in propagating the 3 to 5 wavelengths along the bed. The theoretical problem of propagation in high speed elastic bed has not been solved. The best information available at this time indicates that it might indeed be possible to go out into reef country and experimentally find a location suitable to generate a rarefaction first motion by the double …

At the request of the Bureau of Ordnance, Department of the Navy, the Langley Pilotless Aircraft Research Division has initiated a program to investigate the general aerodynamic characteristics of the Naval Ordnance Test Station's SIDEWINDER missile. The model used in the flight test presented herein was a full-scale, rocket-propelled test vehicle. This paper presents the results from a flight test investigation using the pulsed-control technique to determine the static and dynamic longitudinal stability and control derivatives and drag data for a canard-missile configuration.

Report discussing an investigation of external-store characteristics using a 245-gallon external fuel tank mounted under a wing of a North American F-86A airplane. The store normal force was found to increase abruptly on penetration of the buffet boundary. Information about the normal- and side-load distribution and integrated force and moment coefficients is provided.

Existing experimental information about the nucleon-anitnucleon interaction is reviewed, and a description is given of a theoretical model, based on the Yukawa theory, which seems able to explain the experimental results.

None

None

Report presenting the effects of inclining the plane of the inlet on the performance of several converging-diverging diffusers at zero angle of attack for a range of Mach numbers. Results regarding Schileren photographs, static-pressure recovery, total-pressure loss, and total-pressure distributions are provided.

This memorandum is the first in a series reporting progress in the program of critical experiments in the ORNLArmy Package Power Reactor Project. The critical assembly, designated as CA-25, is analogous to the APPR design core and consists of 45 fuel boxes, in a 7 x 7 array with the corners removed, contaIned in a large water tank. Two sides of each box are slotted for the insertion and positioning of any desired loading of eighteen plates of fuel, structural material, and poison. The array is submerged in water to provide a moderated and reflector. Enriched uranium metal, in two-mil-thick foils 2.5 x 22 in, is encased in type 304 stainless steel sheets, 2.7 x 23 x 0.0105 in., to form fuel plates. Stainless steel plates, 2.7 x 23 x 0.025 in. are used to simulate additional steel in the APPR core. It is, therefore, possible to maintain an essentially constant metal to water ration in the assembly when the fuel content is varied. The fuel is distributed as uniformly as possible in all boxes and a symmetrical distribution of materials is maintained in the core at all times. Fuel plates containing half-width (1.25 in) uranium foils are provided for …

Uranium and plutonium were recovered by liquid-liquid extraction from simulated sulfuric acid stainless steel decladding solution with several extractants. Consecutive extraction of U(IV) and Pu(III) or (IV) by 0.1 to 0 3 M primary amine in hydrocarbon-- alcohol diluent appeared promising, and chemical flowsheets were demonstrated in laboratoryscale continuous countercurrent extraction. Extraction of U(VI) with a dialkylphosphoric acid appeared promising when plutonium recovery is not needed. Recovery is also chemically feasible by extraction of U(VI) and Pu(IV) with an N-benzyl secondary alkyl amine or a trialkylphosphine oxide. The amine extracts are stripped with nitric acid, giving a sulfate-nitrate product solution. The organophosphorus extractants permit elimination of the sulfate but require sodium carbonate for stripping. (auth)

This report details initial results of a large scale accountability test program which was recently carried out in the Redox Facility. The test, as originally planned which was to consist of the complete processing (no inventory-clean plant basis) of about 55 tons of selected metal in conjunction with an extensive analytical, sampling, and volume measurement program. With the exception of two incidents, the processing requirements (minimum inventory and measurement of all material) necessary to the success of the test, were met. The two incidents which increase the uncertainties associated with some of the material balance values obtained were: the discharge of an estimated 700 pounds of uranium to the floor in a transfer from F-5 to F-4 due tot he improper installation of the F-5 to F-4 transfer line (jumper) and the discovery of a large accumulation of plutonium ({approximately} 15 kg) in the L-2 stripping tower after completion of the test run.

None

It has been noted on occasion that the side rupture rate at lower exposure is higher than one would expect in order to be consistent with the mathematical model (Weibull curve) used describe the rupture data. This has apparently been due to a few ruptures occurring at exposures lower than one would anticipate on the basis of the model. Restricting themselves to fuel elements irradiated under similar conditions of power and temperature, it is difficult to assert that these ruptures are anomalous with respect to the model used since there are so few ruptures involved. For this reason, some means of combining data was called for in order to see whether or not at least some of these low exposure ruptures were inconsistent with the model, and, if so, to revise the model in order to better describe side rupture performance. In this report, the results of an analysis of side failure data for failures covered in a previous report are given. Also included is a discussion of possible implications derived from recognition of the existence of this revised model.

The purpose of these investigations is to determine, grossly and simply, if a shock hazard exists from an explosive failure of the pressurizer vessel within the vapor container. Because of the geographical location of the reactor, an explosive failure which ruptured the vapor container might release radioactive contamination from the reactor to nearby inhabited communities. The study is considered more as a generic problem than of a specific design and is concerned with the shock hydrodynamics of an exploding steam vessel. (auth)

Bench-scale studies were made on use of di(2ethylhexyl)-phosphoric acid in an organic diluent (Dapex process) for solvent extraction recovery of vanadium from acid leach liquors. Vanadium may be stripped from the solvent by either acidic or alkaline reagents, the former having been studied in considerably greater detail. A process for single-cycle recovery and separation of uranium and vanadium from sulfate leach liquors was shown to be attractive both from the standpoint of operation and chemical costs. Process schemes for recovery of vanadium from uranium-barren liquors are also described. On the basis of the encouraging laboratory results, pilot scale tests for specific applications are recommended. (auth)

The principal relations for the stress analysis of flat circular plates according to the classical theory are presented in a convenient form. Almost any flat circular plate of uniform thickness, with or without central holes, loaded with any combination of axisymmetrical loads may be analyzed by the procedures. (A.C.)

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John Ben Shepperd, regarding a legal question submitted for clarification; Final date for allowance of claims against Texas Citrus Commission.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, John Ben Shepperd, regarding a legal question submitted for clarification: Payment of poll tax as a prerequisite to voting by servicemen during 1954.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Will Wilson, regarding a legal question submitted for clarification: The status of a member of a Board or Commission whose appointive term has expired during the recess of the Senate and whose successor has not been appointed and submitted to the Senate of the First Session of the Legislature convening after the expiration of the member's term.