"Changes, corrections and additions to the original report are included in this addendum. These are brought about by further development of the design by Blaw-Knox, AHL and ORNL. The changes in the original wiritings are listed below in accordance with the main headings, pages and paragraphs to which they apply. Following this is a list of the contemplated personnel in the MTR program. This listing sets out the number of offices and the office furniture requirements. Also numbers for lockers, showers, toilets and rest rooms are set forth. Although the listing includes all major buildings planned for the site, it is included here since the reactor building wing is more markedly influenced by office requirements."

None

Abstract: "A number of direct current conduction type electromagnetic pumps for liquid metals were constructed. Pumping capacities of over 400 gpm and efficiencies of over 50 percent were obtained. NaK alloy at temperatures up to 400 C was used in the test. The large currents required were obtained from rectifiers or from a homopolar generator constructed for the purpose."

From abstract: "The present report describes experimental work performed to establish a procedure for the production of uranium metal wire. In all cases, the size of the initial rod was 1/2 inch diameter. Three materials were used: hot extruded tuballoy rod, high purity cast tuballoy rod, and cast U-235 rod."

None

Report discussing flow surveys made of several nozzles using two 2-dimensional steps at Mach number 6.98. Results regarding wall-pressure surveys, disturbance patterns in expansion, total-pressure survey, temperature recovery, and general nozzle characteristics are provided.

A high resolution scale-of-four has been developed to be used in conjunction with the nuclear particle detection devices in applications where the counting rate is unusually high. Specifically, it is intended to preceed the commercially available medium resolution scaling circuits and so decrease the resolving time of the counting system. The circuit will function reliably on continuously recurring pulses separated by less than 0.1 μ sec. It will resolve two pulses (occuring at a moderate repetition rate) which are spaced at 0.04 μ sec. A five-volt input signal is sufficient to actuate the device.

"A single-stage modification of the turbine from a Mark 25 torpedo power plant was investigated to determine the performance with two nozzle designs in combination with special rotor blades having a 20 inlet angle. The performance is presented in terms of blade, rotor, and brake efficiency as a function of blade-jet speed ratio for pressure ratios of 8, 15 (design), and 20. The blade efficiency with the nozzle having circular pas- sages (K) was equal to or higher than that with the nozzle having rectangular passages (J) for all pressure ratios and speeds investigated" (p. 1).

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: The eligibility of a married woman under 21 years of age to be a notary public.

None

The results of an investigation of two 10-foot-diameter, two-blade NACA propellers are presented for a range of blade angles from 20 degrees to 55 degrees at airspeeds up to 500 miles per hour. These results are compared with those from previous investigations of five related NACA propellers in order to evaluate the effects of blade-section thickness ratios on propeller aerodynamic characteristics.

"A general algebraic method of attack on the problem of controlling gas-turbine engines having any number of independent variables was utilized employing operational functions to describe the assumed linear characteristics for the engine, the control, and the other units in the system. Matrices were used to describe the various units of the system, to form a combined system showing all effects, and to form a single condensed matrix showing the principal effects. This method directly led to the conditions on the control system for noninteraction so that any setting disturbance would affect only its corresponding controlled variable" (p. 581).

Memorandum presenting an investigation of two annular diffusers of different conical angles of expansion but constant outer diameters with rotating flow behind a fan. The performance characteristics are determined and the rotational-kinetic-energy effects on the overall energy transformation are observed over a range of inlet mach numbers from 0.1 to 0.44 and angles of flow up to 28 degrees.

"Flight tests were conducted at the NACA Pilotless Aircraft Research Station, Wallops Island, to determine the characteristics of the Allegany Ballistics Laboratory's 6.2inch-diameter Deacon and 10-inch-scale model solid-propellant rocket motors. The tests were performed to assist in the development of these rockets which were designed for, and urgently needed to propel supersonic research models and pilotless aircraft. The tests showed that the rocket motors functioned properly under various flight- acceleration loads over a range of pre-ignition grain temperatures" (p. 1).

Wind-tunnel tests of a full-scale model of the Republic XF-91 airplane were conducted to determine the distribution of pressure over the external wing fuel tank installation and over the vee tail and ventral fin. The data were obtained for a range of angles of attack and sideslip and elerudder deflection angles; the presentation is in tabular form.

Report presenting an analytical study of four combinations of subsonic and supersonic flow in the rotor- and stator-blade passages of axial-flow compressors.

Report presenting an experimental investigation of a submerged air inlet incorporating a cascade of airfoils for turning and diffusing the entering air. Variables associated with submerged air inlets and airfoil-cascade designs were considered, including changes to the ramp plan form and angle for the submerged inlet and the cascade-axis inclination, cascade-blade angle, solidity, and inclination of the center line of the duct for the cascade.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: The maximum compensation of County Attorney, County Clerk, County Tax Assessor-Collector, and County Treasurer and questions relating to the duties of County Treasurer.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: Authority of a district judge to appoint, with the approval of the Board of Pardons and Paroles, a probation and parole officer under the provisions of Article 781b, V.C.C.P., to serve without cost to the State or county.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: Questions involving the legality of S. B.. No. 18, 51st Legislature.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Price Daniel, regarding a legal question submitted for clarification: The applicability of Arts. 6056 and 6060, V.C.S., relative to operator's reports and gross receipts taxes of gas utilities, to named corporations, under the submitted facts.

Introduction: "Room temperature and elevated temperature, static immersion and vapor suspicion, corrosion tests were conducted with Duriron, Hastelloy C, and tantalum in hydriotic acid and 234-5 project process supernatant solution (synthetic environments. The data relevant to these tests are contained herein."

"A method of predicting equilibrium operating performance of turbojet engines has been developed, with the assumption of simple model processes for the components. Results of the analysis are plotted in terms of dimensionless parameters comprising critical engine dimensions and over-all operating variables. This investigation was made of an engine in which the ratio of axial inlet-air velocity to compressor-tip velocity is constant, which approximates turbojet engines with axial-flow compressors" (p. 673).

This report details events of importance reported by the Hanford Operations Office for the week ending February 23, 1949.