In order to design radiation ports and beam line components, it is essential to understand the distribution of power from a radiation source as a function of both the photon energy and the solid angle of emission. In this preliminary note, we assemble all the formula involved for the case of a bending magnet and a wiggler. Typical distributions are presented for the case of 6-Gev radiation.

This memorandum documents a study that showed a cyclic occurrence of porosity in U-Al alloys produced in Building 321-M. Review of process data shows that the extent of porosity is more pronounced in months of warm, humid weather and less pronounced in cooler, drier months. This porosity is most likely caused by hydrogen, which becomes dissolved in the molten U-Al alloy during casting. Although excessive porosity was the cause of some observed process anomalies, this type of porosity has no significant effect on yield or fuel tube quality.

Reservoir designs consist of two primary features including the stem(s) and the body segment. The stem is either an integral part of the reservoir or is joined at some point in the fabrication sequence. The current interest is in high strength stems for advanced reservoir designs. The processing necessary to achieve these strength levels may result in heavily cold worked microstructures which may not interface well with the stem requirements. For instance, cold worked 316 plate stock has shown decreased hydrogen compatibility when contrasted to the annealed version in laboratory tests. More recently, Precision Forge produced a 100 ksi yield strength, 304L stem forging with a heavily deformed microstructure which also may show decreased compatibility in hydrogen. The proposed forging contract will evaluate the influence of forging parameters on the microstructure and mechanical properties of 304L and 316 stem forgings. A summary of the data available on 304L stem forgings is shown graphically. The yield strength values are shown for each set of forging parameters. Tensile tests and microstructural examination will be conducted to complete the information for 304L and create a similar graph for 316 stem forgings.

EQ3/6 geochemical modeling code package was used to investigate the interaction of the Topopah Spring Tuff and J-13 water at high temperatures. EQ3/6 input parameters were obtained from the results of laboratory experiments using USW G-1 core and J-13 water. Laboratory experiments were run at 150 and 250{sup 0}C for 66 days using both wafer-size and crushed tuff. EQ3/6 modeling reproduced results of the 150{sup 0}C experiments except for a small increase in the concentration of potassium that occurs in the first few days of the experiments. At 250{sup 0}C, the EQ3/6 modeling reproduced the major water/rock reactions except for a small increase in potassium, similar to that noted above, and an overall increase in aluminum. The increase in potassium concentration cannot be explained at this time, but the increase in A1 concentration is believed to be caused by the lack of thermodynamic data in the EQ3/6 data base for dachiardite, a zeolite observed as a run product at 250{sup 0}C. The ability to reproduce the majority of the experimental rock/water interactions at 150{sup 0}C validates the use of EQ3/6 as a geochemical modeling tool that can be used to theoretically investigate physical/chemical environments in support of the Waste Package …

This report is a table listing spare parts for the B83-0 type 3C. An explanation for information in each column is given. This issue supersedes Issue F, dated March 22, 1985.

The overall objective of this project is to collect, organize, and summarize data concerning anadromous fish culture stations of the Columbia River system for 1981, 1982, and 1983 and to create a data archive system with a means of making this information available to the public.

This report discusses the following topics on the Superconducting Super Collider: Present status of magnet technology; description of various magnet systems; development of superconducting wire and cable; and R&D program.

The Solar Energy Research Institute (SERI) is conducting research on the development of microalgae biomass systems for the production of liquid fuels. Particularly appealing at this time, is the idea of using indigenous resources of the Southwest for large-scale production of microalgae.

None

This body of work represents the parametric investigation of conditions of impact for a GPHS fueled capsule.

A current to pressure (I/P) transducer will be used in the D-Zero piping system. The transducer is necessary to precisely control the control valve positioners located at the argon and nitrogen dewars. A 4-20 rnA signal will come from the PLC function of the TI565. This electric signal must be converted by the transducer to a pneumatic signal of 3-15 psi which will position the actuator. By doing this, the valve can be opened or closed to any adjusted amount from the control room or a remote I/P controller. A total of 9 transducers will be used at the dewars. The nitrogen dewar will have 3 that are located outside and will have to be weatherproof. The argon dewar will have 6, located inside, that will have to be explosion proof or intrinsically safe.

This report summarizes the results of a Radioisotope Thermoelectric Generator (RTG) design study conducted by Fairchild Space Company at the direction of the U.S. Department of Energy's Office of SpecialApplications, in suppport of the Mars Rover and Sample Return mission under investigation at NASA's Jet Propulsion Laboratory. The report is a rearranged, updated, and significantly expanded amalgam of three interrelated papers presented at the 24th Intersocity Energy Conversion Engineering Conference (IECEC) at Arlington, Virginia, on August 10, 1989.

None

None

None

None

None

The 5MW(e) Dual Boiling Cycle Geothermal Power Plant, hence referred to as the Raft River plant, is being developed for DOE by EG and G, Inc., Idaho Falls, Idaho. This pilot power plant is of the binary concept and utilizes isobutane as the working second fluid. The plant will demonstrate the feasibility of power generation from an intermediate temperature ({approx} 290 F) resource. The plant is schematically diagrammed in Figure 1. During the final design phase and after the major components were specified to be made of carbon steel, and ordered, various conditions forced the power plant design to switch from surface water to geothermal fluid for the condenser cooling loop make-up water. Because the geothermal fluid contains significant concentrations of chlorides and sulfates, about 1000 ppm and 65 ppm respectively, aeration in the cooling tower causes this water to become extremely aggressive, especially in the pitting of carbon steel components. Although essentially all of the condenser cooling loop materials are carbon steel, the isobutane condenser and turbine lube oil cooler are the most vulnerable. These components are tubed with carbon steel tubes of 0.085 and 0.075 inch wall thickness. These two components are extremely leak critical heat exchangers. For …

The authors consider changes in the momentum dispersion function induced by field gradient errors of quadrupole magnets located around a ring.

Results are presented of work performed on the Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Included are the activities associated with the status of the simulated reactor helium supply system, testing equipment and gas chemistry analysis instrumentation and equipment. The progress in the screening test program is described, including screening creep results and metallographic analysis for materials thermally exposed or tested at 750, 850, and 950/sup 0/C.

Pulverized coal has been an increasing important source of energy over the past century. Most large utility boilers, all modern coking plants, and many industrial boilers and blast furnaces employ pulverized coal as a major feed stream. In periods of oil shortages, such as during World Wars I and II, the concept of adding powdered coal to oil for use in combustion equipment originally designed for oil has been actively pursued but rarely used. Over this same period of time, there have been attempts to use air suspensions of coal dust in diesel engines in Germany, and in turbines in various countries. The economic advantages to be enjoyed by substitution of powdered coal in oil are not generally realized. Oil costs at $30/bbl represent a fuel value of about $5.00/10/sup 6/ Btu; coal at $25/ton is equivalent to approximately $1.00/10/sup 6/ Btu. Although capital costs for the use of coal are higher than those associated with the use of oil, coal is clearly becoming the least costly fuel. Not only are considerable cost advantages possible, but an improvement in balance of payments and an increase in reliability of fuel supplies are other potential benefits. It is therefore recommended that increased …

The goal of this project is to find countermeasures to protect High Efficiency Particulate Air (HEPA) filters, in exit ventilation ducts, from the heat and smoke generated by fire. Initially, methods were developed to cool fire-heated air by fine water spray upstream of the filters. It was recognized that smoke aerosol exposure to HEPA filters could also cause disruption of the containment system. Through testing and analysis, several methods to partially mitigate the smoke exposure to the HEPA filters were identified. A continuous, movable, high-efficiency prefilter using modified commercial equipment was designed. The technique is capable of protecting HEPA filters over the total time duration of the test fires. The reason for success involved the modification of the prefiltration media. Commercially available filter media has particle sorption efficiency that is inversely proportional to media strength. To achieve properties of both efficiency and strength, rolling filter media were laminated with the desired properties. The approach was Edisonian, but truncation in short order to a combination of prefilters was effective. The application of this technique was qualified, since it is of use only to protect HEPA filters from fire-generated smoke aerosols. It is not believed that this technique is cost effective in …

Sodium fluoride (NaF) traps in the PGDP purge cascade presently use NaF pellets to remove residual UF{sub 6} from the gas stream. These pellets are procured from ORGDP which converts sodium bifluoride pellets to NaF by thermal decomposition. Discussions of the possibility of no longer producing pellets at ORGDP, due to oven corrosion problems, led to a pilot plant test at PGDP. This test was designed to examine the feasibility of producing the NaF pellets at PGDP in the event that an alternative source of supply became necessary. Satisfactory pellets were produced without difficulty; however, it was determined that the conversion process could not be readily carried out in the existing NaF traps. Construction of a separate facility with provisions to handle the large quantities of hydrogen fluoride (HF) released during the process would be required to produce pellets at the rate needed. 1 fig., 2 tabs.

This document basically represents a comparison between theory and practice of capacity-expansion planning in the electric-utility industry. The purpose of the comparison is to provide avenues for further exploration in utility decision making. The focus of the Phase II study is upon the role of uncertainty in the decision-making process. The Phase I effort was directed at modeling the Averch-Johnson theory of the regulated utility. Part I of this report reviews the Anderson study (D. Anderson, Models for Determining Least-Cost Investments in Electricity Supply). The Anderson paper has become a standard reference for capacity-planning studies in the electric-utility industry. Part II examines uncertainty and the behavior of the firm. Part III reviews 5 models of electric-utility capacity planning under uncertainty, and Part IV is concerned with capacity-planning models in practice.