Correspondence issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO provided information on how federal agencies should assess the quality of program performance data."

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed the Essential Air Service (EAS) program, focusing on: (1) changes in the number of communities and passengers receiving subsidized service; (2) changes in the level of subsidies provided; and (3) reasons why the subsidy levels changed."

Other written product issued by the General Accounting Office with an abstract that begins "Pursuant to a legislative requirement, GAO reviewed the National Highway Traffic Safety Administration's (NHTSA) new rule on federal motor vehicle safety standards and occupant crash protection. GAO noted that: (1) the final rule amends the occupant crash protection standard to require that future air bags be designed to create less risk of serious air bag-induced injuries than current air bags, particularly for small women and young children; (2) NHTSA complied with the applicable requirements with one exception; (3) the final rule has an announced effective date of June 12, 2000; (4) the Congressional Review Act requires major rules to have a 60-day delay in their effective date following publication in the Federal Register or receipt of the rule by Congress, whichever is later; and (5) the rule was not published in the Federal Register until May 12, 2000, which means the final rule will not have the required 60-day delay in the effective date."

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a legislative requirement, GAO reviewed certain aspects of the Judicial Survivors' Annuities Systems (JSAS), which provides annuities to the surviving spouses and dependent children of deceased federal judges and other judicial officials who participate in JSAS."

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed what the Department of Veterans Affairs (VA) and Department of Defense (DOD) have done and what more they could do to reduce drug prices and dispensing costs, focusing on the: (1) extent of joint DOD and VA drug contracting thus far and the prospects for further contracting; (2) prospects of DOD using VA's consolidated mail outpatient pharmacy (CMOP) centers to handle its hospital outpatient pharmacy refill workload; and (3) possible need for measures to facilitate such joint actions to bring about further improvements."

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed the Breast Cancer Research Semipostal (BCRS), focusing on the: (1) appropriateness and effectiveness of the BCRS as a fundraiser; and (2) costs associated with developing and selling the BCRS."

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed the potential security risk to the United States posed by the use of stolen or counterfeit law enforcement badges and credentials."

To evaluate the postclosure performance of a potential monitored geologic repository at Yucca Mountain, a Total System Performance Assessment (TSPA) will be conducted. Nine Process Model Reports (PMRs), including this document, are being developed to summarize the technical basis for each of the process models supporting the TSPA model. These reports cover the following areas: (1) Integrated Site Model; (2) Unsaturated Zone Flow and Transport; (3) Near Field Environment; (4) Engineered Barrier System Degradation, Flow, and Transport; (5) Waste Package Degradation; (6) Waste Form Degradation; (7) Saturated Zone Flow and Transport; (8) Biosphere; and (9) Disruptive Events. Analysis/Model Reports (AMRs) contain the more detailed technical information used to support TSPA and the PMRs. The AMRs consists of data, analyses, models, software, and supporting documentation that will be used to defend the applicability of each process model for evaluating the postclosure performance of the potential Yucca Mountain repository system. This documentation will ensure the traceability of information from its source through its ultimate use in the TSPA-Site Recommendation (SR) and in the National Environmental Policy Act (NEPA) analysis processes. The objective of the Biosphere PMR is to summarize (1) the development of the biosphere model, and (2) the Biosphere Dose Conversion …

This document identifies critical characteristics of components to be dedicated for use in Safety Class (SC) or Safety Significant (SS) Systems, Structures, or Components (SSCs). This document identifies the requirements for the components of the common radiation area monitor alarm in the WESF pool cell. These are procured as Commercial Grade Items (CGI), with the qualification testing and formal dedication to be performed at the Waste Encapsulation Storage Facility (WESF), in safety class, safety significant systems. System modifications are to be performed in accordance with the instructions provided on ECN 658230. Components for this change are commercially available and interchangeable with the existing alarm configuration This document focuses on the operational requirements for alarm, declaration of the safety classification, identification of critical characteristics, and interpretation of requirements for procurement. Critical characteristics are identified herein and must be verified, followed by formal dedication, prior to the components being used in safety related applications.

In 1999, the American Society for Microbiology (ASM) and the National Academy of Sciences' U.S. National Committee for the International Union of Microbiological Sciences (IUMS) jointly organized a competitive travel grant program to support the participation of U.S. scientists in the 9th International Congresses of the Bacteriological and Applied Microbiology, Mycology and Virology Divisions of the IUMS in Sydney, Australia, August 16-20, 1999. Funding was solicited for the program, and the ASM Minority and International Activities department administered the $40,000 raised. Travel grants in the amount of $2,000 were offered to U.S. investigators (citizens, including federal employees, and permanent residents working in the United States) in the early stages of their careers who planned to attend and present their research at the Congress. Teams of established and new investigators who applied jointly were eligible to received a combined $3,000 award. IUMS developed a questionnaire th at each applicant were required to complete and return, which asked each award recipient about their experience at the Congresses. Questionnaire results are included.

The scope of the Mercury Laser project encompasses the research, development, and engineering required to build a new generation of diode-pumped solid-state lasers for Inertial Confinement Fusion (ICF). The Mercury Laser will be the first integrated demonstration of laser diodes, crystals, and gas cooling within a scalable laser architecture. This report is intended to summarize the progress accomplished during the first three years of the project. Due to the technological challenges associated with production of 900 nm diode-bars, heatsinks, and high optical-quality Yb:S-FAP crystals, the initial focus of the project was primarily centered on the R&D in these three areas. During the third year of the project, the R&D continued in parallel with the development of computer codes, partial activation of the laser, component testing, and code validation where appropriate.

The saturation of impurity-rich accessory phases in a Ce-analog baseline ceramic formulation for the immobilization of excess plutonium has been tested by synthesizing an impurity-rich baseline compositions at 1300 C, 1350 C, and 1400 C in air. Impurity oxides are added at the 10 wt% level. The resulting phases assemblages are typically rich in pyrochlore, Hf-zirconolite (hafnolite), brannerite and rutile, but in many instances also contain an accessory mineral enriched in the impurity oxide. The concentration of that oxide in coexisting pyrochlore sets the saturation limit for solid solution of the component in question. In most cases, the accessory phase does not contain significant amounts of Ce, Gd or U. Exceptions are the stabilization of a Ca-lanthanide phosphate and a phosphate glass when P{sub 2}O{sub 5} is added to the formulation. P{sub 2}O{sub 5} addition is also very effective in reducing the modal amount of pyrochlore in the form relative to brannerite. Addition of the sodium-aluminosilicate, NaAlSiO{sub 4}, also results in the formation of a grain boundary melt at run conditions, but the fate of this phase on cooling is not well determined. At temperatures above 1300 C, addition of 10 wt% Fe{sub 2}O{sub 3} also leads to melting. Substitution …

Three compositions representing plutonium-free analogs of a proposed Ca-Ti-Gd-Hf-U-PU oxide ceramic for the immobilization of plutonium were equilibrated at 1 atm, 1350 C over a range of oxygen fugacities between air and that equivalent to the iron-wuestite buffer. The cerium analog replaces Pu on a mole-per-mole basic with Ce; the thorium analog replaces Pu with Th. A third material has 10 wt% Al{sub 2}O{sub 3} added to the cerium analog to encourage the formation of a Hf-analog of, CaHfTi{sub 2}O{sub 7}, zirconolite, which is referred to as hafnolite. The predominant phase produced in each formulation under all conditions is pyrochlore, A{sub 2}T{sub 2}O{sub 7}, where the T site is filled by Ti, and Ca, the lanthanides, Hf, U and Pu are accommodated on the A-site. Other lanthanide and uranium-bearing phases encountered include brannerite (UTi{sub 2}O{sub 6}), hafnolite (CaHfTi{sub 2}O{sub 7}), perovskite (CaTiO{sub 3}) and a calcium-lanthanide aluminotitanate with nominal stoichiometry (Ca,Ln)Ti{sub 2}Al{sub 9}O{sub 19}, where Ln is a lanthanide. The phase compositions show progressive shifts with decreasing oxygen fugacity. All of the phases observed have previously been identified in titanate-based high-level radioactive waste ceramics and demonstrate the flexibility of these ceramics to variations in processing parameters. The main variation is …

The use of liquid walls for fusion reactors could help solve problems associated with material erosion from high plasma heat-loads and neutronic activation of structures. A key issue analyzed here is the influx of impurity ions to the core plasma from the vapor of liquid side-walls. Numerical 2D transport simulations are performed for a slab geometry which approximates the edge region of a reactor-size tokamak. Both lithium vapor (from Li or SnLi walls) and fluorine vapor (from Flibe walls) are considered for hydrogen edge-plasmas in the high- and low-recycling regimes. It is found that the minimum influx is from lithium with a low-recycling hydrogen plasma, and the maximum influx occurs for fluorine with a high-recycling hydrogen plasma.

The purpose of this analysis is to identify and evaluate the functional space and spatial relationship requirements for the two main nuclear buildings, the Waste Handling Building (WHB) and the Waste Treatment Building (WTB), which are part of the Repository Surface Facilities. This analysis is consistent with the Development Plan for ''WHB/WTB Space Program Analysis for Site Recommendation'' (CRWMS M&O 2000r), which concentrates on the primary, primary support, facility support, and miscellaneous building support areas located in the WHB and WTB. The development plan was completed in accordance with AP-2.134, ''Technical Product Development Planning''. The objective and scope of this analysis is to develop a set of spatial parameters (e.g., square footage, room heights, etc.) and layout requirements (e.g., adjacency and access/circulation requirements, etc.) from which preliminary building floor plans are developed and presented as figures. The resulting figures will provide information to support the Site Recommendation and the total system life cycle cost. This analysis uses the Viability Assessment (VA) ''Surface Nuclear Facilities Space Program Analysis'' (SPA) (CRWMS M&O 1997c) as the baseline reference document and further develops the functional requirements based on Project-directed changes, including incorporation of a new design basis waste stream and the applicable elements of …

A general tax cut (H.R. 2488), costing $792 billion over 10 years, was vetoed in September 1999. A more narrowly focused bill (H.R. 1180) extending certain expiring provisions was adopted in December. Several tax proposals have been or are likely to be considered in 2000. The largest of these was marriage penalty legislation (H.R. 6 and S. 2346). Tax provisions are also included in health care legislation and minimum wage legislation; the latter passed the House on March 9 and included distressed communities legislation and a repeal of the installment sales provision included in the extenders bill. A number of separate tax bills are also under consideration. The general tax cut proposal included across-the-board tax cuts, benefits for married couples, phase-out of the alternative minimum tax, a reduction in capital gains taxes, a phase-out of the estate tax and provisions relating to education and health.

A better understanding of the formation of large-scale structure in the Universe is arguably the most pressing question in cosmology. The most compelling and promising theoretical paradigm, Inflation + Cold Dark Matter, holds that the density inhomogeneities that seeded the formation of structure in the Universe originated from quantum fluctuations arising during inflation and that the bulk of the dark matter exists as slowing moving elementary particles (cold dark matter) left over from the earliest, fiery moments. Large redshift surveys (such as the SDSS and 2dF) and high-resolution measurements of CBR anisotropy (to be made by the MAP and Planck Surveyor satellites) have the potential to decisively test Inflation + Cold Dark Matter and to open a window to the very early Universe and fundamental physics.

A new method of ultrasensitive trace-isotope analysis has been developed based upon the technique of laser manipulation of neutral atoms. It has been used to count individual {sup 85}Kr and {sup 81}Kr atoms present in a natural krypton sample with isotopic abundances in the range of 10{sup {minus}11} and 10{sup {minus}13}, respectively. The atom counts are free of contamination from other isotopes, elements,or molecules. The method is applicable to other trace-isotopes that can be efficiently captured with a magneto-optical trap, and has a broad range of potential applications.

The surface termination of c-axis oriented YBa{sub 2}Cu{sub 3}O{sub 7{minus}{delta}} (YBCO) and the oxygen incorporation mechanism has been investigated using a unique combination of spectroscopic ellipsometry (SE) and time of flight ion scattering and recoil spectrometry (ToF-ISARS). The high surface sensitivity of the ToF-ISARS technique combined with the bulk oxygen sensitivity of SE are shown to yield complimentary information. The SE provided the film orientation and quality, while ToF-ISARS supplied surface compositional and structural information and enabled isotopic {sup 18}O tracer studies. It was determined that the O content of the film had little effect on the surface termination of the film, indicating a lack of labile Cu(1) sites at the c-axis oriented YBCO surface. Also, strong evidence for a Ba or BaO terminated structure is shown. The data related to the {sup 18}O tracer studies indicate that O from the reaction ambient incorporates only into the labile Cu(1) sites during both deposition and annealing, while stable O sites were populated with O from the sputtered target, indicating either the need for sputtered atomic O or sputtered YCuO complexes to occupy the stable Cu(2) sites.

During the transport of tank waste, it is very important to quantitatively measure the percent solids concentration (PSC) of the waste, which indicates the flow conditions and the extent of solids settling. At Argonne National Laboratory, an in-line, real-time, a nonintrusive ultrasonic monitoring system has been developed to measure the PSC and flow density of tank waste by measuring sound velocity and attenuation in the flow. This system consists of a pair of longitudinal transducers bonded to waveguides on the opposite sides of the pipe and operating at IMHz simultaneously in pulse-and-echo and pitch-and-catch modes. The PSC measurement is provided by attenuation, while the density measurement is calculated by impedance and sound velocity. A thermocouple is attached to one of the waveguides for automatic temperature correction of the measurements. This system was one of four evaluated for in-line measurement of slurry at Oak Ridge National Laboratory in 1998. The results indicate that the measurements are in good agreement with a Coriolis meter and that the system can be used to monitor PSC up to 40 wt.%. However, the system is greatly affected by entrained air bubbles within the solid flow during Puisair mixing. A different mixing mechanism will solve this …

The National Spherical Torus Experiment (NSTX) started plasma operations in February 1999, and promptly achieved high current, inner wall limited, double null, and single null plasma discharges, initial Coaxial Helicity Injection, and High Harmonic Fast Wave results. NSTX is designed to study the physics of Spherical Tori (ST) in a device that can produce non-inductively sustained high-{beta} discharges in the 1 MA regime and to explore approaches toward a small, economical high power density ST reactor core. As expected, discharge reproducibility and performance were strongly affected by wall conditions. In this paper, the authors describe the internal geometry, and initial plasma discharge, impurity control, wall conditioning, erosion, and deposition results.

Circulating Fluidized Bed Combustion (CFBC) and Fluidized Bed Combustion (FBC) with recirculation are widely used technologies in the US for power generation. They have the advantage of fuel flexibility, and low NO{sub x} and SO{sub x} emissions. Typically, as partially combusted fuel is circulated in the system, only a split stream of this circulating stream is rejected, with remainder recycled to the combustor. As a consequence, there is unburned carbon and partially used, valuable, calcium hydroxide in the reject stream. If these useful materials in the reject stream can be recovered and sent back to the combustor, the efficiency of the system will be increased significantly and the equivalent emissions will be lower. This project studies an innovative concept to incorporate triboelectric separation into CFBC/FBC systems in order to preferentially split its recycle/reject streams based on material compositions of the particles. The objective is to answer whether useful constituents, like carbon, calcium carbonate and calcium hydroxide or oxide, can be selectively separated from combustion ash at elevated temperatures. Laboratory experimental studies are performed at temperatures from 25 C to 210 C, the data from which are presented in the form of recovery curves. These curves present quality-versus-quantity information useful for …

Electroweak symmetry breaking may be naturally induced by the observed quark and gauge fields in extra dimensions without a fundamental Higgs field. The authors show that a composite Higgs doublet can arise as a bound state of (t,b){sub L} and a linear combination of the Kaluza-Klein states of t{sub R}, due to QCD in extra dimensions. The top quark mass depends on the number of active t{sub R} Kaluza-Klein modes, and is consistent with the experimental value.

The ability to withstand disruptions makes carbon-based materials attractive for use as plasma-facing components in divertors. However, such materials suffer high erosion rates during attached plasma operation which, in high power long pulse machines, would give short component lifetimes and high tritium inventories. The authors present results from recent experiments in DIII-D, in which the Divertor Materials Evaluation System (DiMES) was used to examine erosion and deposition during short exposures to well defined plasma conditions. These studies show that during operation with detached plasmas, produced by gas injection, net erosion is suppressed everywhere in the divertor. Net deposition of carbon with deuterium was observed at the inner and outer strikepoints and in the private-flux region between strikepoints. For these low temperature plasmas (T{sub e} < 2eV), physical sputtering is eliminated. These results show that with detached plasmas, the location of carbon net erosion and the carbon impurity source, probably lies outside the divertor. Physical or chemical sputtering by charge-exchange neutrals or ions in the main plasma chamber is a probable source of carbon under these plasma conditions.